but if you post and let people know which decoder and which software you use, some advice could be given...maybe you'll get confused (for the bin)....64..or...arm..??..and ssl
183D/183E EMM Activation via the http/https server with OSCam
- samur
- Thread is marked as Resolved.
-
-
for armv7ve OpenSSL-3.x.x I need it for armv7ve is indiferent the image we use !
-
can you please re compile for armv7ve OpenSSL-3.x.x
;
-
-
-
hello samur pls can you compile a oscam for my debian x86_64 ( pcsc )
i don't know what happen to my 183E don't update anymore
HI,
there's no problem if it's blocked... it happened to me too... I just dialed the tvsat number 06... rome and listened until the... 5th key and sent via cell phone keypad... number of the card and the #..hash is over... and it sends you the activation again... without needing explanations.
-
for PCSC pls. bro
-
hello samur pls can you compile a oscam for my debian x86_64 ( pcsc )
i don't know what happen to my 183E don't update anymore
HI,
there's no problem if it's blocked... it happened to me too... I just dialed the tvsat number 06... rome and listened until the... 5th key and sent via cell phone keypad... number of the card and the #..hash is over... and it sends you the activation again... without needing explanations.
aha... now i know why my card don't update anymore
-
Hi all, I've read all the thread but somehow I don't understand why my card (gold card) is always blocked after some days of use.
I have a Vu+ duo 4k SE with openatv 7.3, the architecture is "arm" and the openssl is version 3.
I've read to use binaries present in the post #67 instead of the ones in the first post. Now I've seen that on the post #303 is present a newer version of oscam (242391-oscam-11725-798-armv7ve-libusb-openssl-3-x-x-zip). Is this lastest version (11725) the preferred to use ? Is it compatible with the "emm_url" (EMM Activation via the http/https server with OSCam) functionality ?
Apparently after 4/5 days of use the card stop working. If I put the card in the physical cam (WE CAM HD CI+) for some time it start working again and then I can reput the card in the internal reader.
I've tried different configurations but without success, the latest which I'm using is:[reader]
label = tivusat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183E
rsakey = A.....5
emm_url = https://rentry.co/ognzc/raw
emm_reload_minute = 60
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
mhz = 368
cardmhz = 368
nagra_read = 2
ident = 183E:000000,005411
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
auprovid = 005411
Shouldn't this configuration keep always the card updated and working with the internal reader ? Do you have any suggestion on how to fix my configuration ?
Regards
-
hello samur pls can you compile a oscam for my debian x86_64 ( pcsc )
i don't know what happen to my 183E don't update anymore
HI,
there's no problem if it's blocked... it happened to me too... I just dialed the tvsat number 06... rome and listened until the... 5th key and sent via cell phone keypad... number of the card and the #..hash is over... and it sends you the activation again... without needing explanations.
Honestly I verified my serial card from website. Still active..
I try send today EMM manually it works OK
-
-
-
rubeni you made a request for a binary and you got it because i thought that you was really a good guy.
and now, you are trying to play with me and teach me how i compile binaries,
So, stop your playing games here, leave this thread and create your own thread ...
;
i'm sorry bro i'm not going to play with no one.
i'm sorry you mistake i'm not try teach you or someone. only i'm ask kindly PCSC bin coz i dont get.
if wyou dont whatever i will use my script like 20 years... huh so draama to me that
-
Hi, my GOLD card is stopped again, oscam doesn't update it, what should I do?
Code2023/11/02 18:40:32 39ACBDDD c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 183E PROVID 000000 ECMPID 1401 ANY CHID PMTPID 00DD VPID 0424 2023/11/02 18:40:33 39ACBDDD c (ecm) dvbapiau (P: 183E:000000:0079:1401:0000: #ECM_L:91 #CW=00000000000000000000000000000000 HOP:): not found (0 ms) by TIVUSAT_HD - Italia1 HD 2023/11/02 18:40:33 39ACBDDD c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 3 disabled ecmpids! 2023/11/02 18:40:33 39ACBDDD c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 183E PROVID 000000 ECMPID 1401 ANY CHID PMTPID 00DD VPID 0424 2023/11/02 18:40:33 39ACBDDD c (ecm) dvbapiau (P: 183E:000000:0079:1401:0000: #ECM_L:91 #CW=00000000000000000000000000000000 HOP:): not found (1 ms) by TIVUSAT_HD - Italia1 HD 2023/11/02 18:40:33 39ACBDDD c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 3 disabled ecmpids! 2023/11/02 18:40:33 39ACBDDD c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 183E PROVID 000000 ECMPID 1401 ANY CHID PMTPID 00DD VPID 0424
-
pastebin or send Emma a hand
I did it... and off she went... flying...
:Translate:
-
pastebin or send Emma a hand
I did it... and off she went... flying...
:Translate:
I do not understand what I have to do?
-
if you don't have Samur's oscam installed or if the pastebin doesn't work... you will have to search for the emm and send it manually in the oscam reader... if you read there is information on how to do it.
-
Quote
if you don't have Samur's oscam installed or if the pastebin doesn't work... you will have to search for the emm and send it manually in the oscam reader... if you read there is information on how to do it.
So, it's not my oscam.server the problem? Only the specific oscam you mention is able to update the emm automatically?
Because here is my oscam.server and it again did not update after the last change.
My oscam is: OSCam: 1.20_svn Build: r11725 Compiler: arm-oe-linux-gnueabi
and I've got a VU+ Ultimo4K with OBH 5.3.009 installed.
To update the emm I had, again, to launch it by the webif but the strange is that if I try by the URL line in the webif itself (in the file path field), I get an error message:
FILE: https://pastebin.com/raw/JJ3TCsGV not found
although the same url perfectly works in a browser and the same emm in the website worked, as always.
Anyway, I paste my oscam.reader in case anyone would check if something is wrong. I deleted from it this line
#emmcache = 1,3,2,0
as I read it was advised to do that.
I have the rsakey I've been using for years: do I need to change as I read somewhere?
Code
Display More[reader] label = tivusat protocol = internal device = /dev/sci0 caid = 183E #caid = 183E, 183D rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5 emm_url = https://pastebin.com/raw/JJ3TCsGV emm_reload_minute = 10 ecmheaderwhitelist = 80308ED387,81308ED387 enable = 1 detect = cd nagra_read = 2 localcards = 183E mhz = 450 cardmhz = 2700 ident = 183E:000000,005411 group = 1 lb_weight = 999 lb_force_fallback = 1 keepalive = 1 blockemm-unknown = 1 blockemm-g = 1 blockemm-u = 1 blockemm-s = 1 saveemm-u = 1 disablecrccws = 1 auprovid = 005411
Thanks for any advice. -
Same for me , raw dont giver me sodisfaction , and i send emm by hand and now is ok!
pastebin or send Emma a hand
I did it... and off she went... flying...
:Translate:
-
OSCam: 1.20_svn Build: r11725 Compiler: arm-oe-linux-gnueabi
this is not my oscam but i can say ....
;
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!