the writing position seemed wrong to me,
to make the pastebin work....you need Samur's Oscam,
read before posting fancy things...pastebin doesn't work on all oscams...it would be too easy.
the writing position seemed wrong to me,
to make the pastebin work....you need Samur's Oscam,
read before posting fancy things...pastebin doesn't work on all oscams...it would be too easy.
good evening, some information, but which pastebin link should be used
.........eliminati i link ..........
Thank you very much!
if you don't have Samur's oscam installed or if the pastebin doesn't work... you will have to search for the emm and send it manually in the oscam reader... if you read there is information on how to do it.
I'm using this Oscam:
hi, ok...seen the bin...I had the same problem yesterday all day...and I think it's something that depends on the oscam.conf protocol... because on other mips decoders it worked very well and also on the H7 of an acquaintance of mine he has the same config as me...I will have to have that config sent back...to see the difference (the oscam.server file is the same for everyone) .
test...ok 100x100 oscam.conf...DM920 Arm
[global]
logfile = /tmp/oscam.Smargo.Emm.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -1
waitforcards = 0
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
dropdups = 1
lb_nbest_readers = 4 #[ To request import ecm from (Number) of readers ]
lb_nfb_readers = 4
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws = 1
[newcamd]
port = 127.0.0.1@183E:000000,005411
key = 0102030405060708091011121314
keepalive = 1
[cache]
max_time = 15
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 0
stream_relay_ctab = FFFE
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only. Other images just 4 or 0]
delayer = 60
request_mode = 1
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]
boxtype = dreambox #[ For enigma2 use (dreambox) And For spark or neutrino use (duckbox) ]
[webif]
httpport = 8888
httpuser = root
#httptpl = /etc/tuxbox/config/tpl/
httppiconpath = /media/ba/picon
httprefresh = 30
httpshowpicons = 1
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
http_status_log = 1
httputf8 = 0
httposcamlabel = Oscam
httpemmsclean = 0
httpemmgclean = 0
I did the test...I deactivated the gold card and within 4 minutes it lit up...with that config.
I'm trying to configure oscam for zgemma h5 mipsel
library I took oscam mipsel lib 1.0.2 renamed and given permissions 775 now I don't know I don't know how to configure it oscam server conf file to see if it is working well what should I do
lrwxrwxrwx 1 root root 15 Apr 30 2021 /usr/lib/libssl.so.0.9. 7 -> libssl.so.1.0.2
lrwxrwxrwx 1 root root 15 Apr 30 2021 /usr/lib/libssl.so.1.0. 0 -> libssl.so.1.0.2
-rwxr-xr-x 1 root root 360716 Apr 30 2021 /usr/lib/libssl.so.1.0. 2
extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]
2 mips
H5_OpenPli-8.3_backup_AU_31.08.23_piterfree
ATV_6.4_ZetaGemma.h5_AU_via web
H5_OpenPli-8.3_backup_AU_31.08.23_piterfree
ATV_6.4_ZetaGemma.h5_AU_via web
ok done https://mega.nz/file/g4ZCTKiY#…qr9KiFr6K-jrez0C6XLdMJ4tk
hi
With : oscam-11725-798.armv7ve-libusb
open pli 8.3
error while loading shared libraries: libssl.so.3: cannot open shared object file: No such file or directory
lrwxrwxrwx 1 root root 16 Nov 3 06:16 /usr/lib/libssh2.so.1 -> libssh2.so.1.0.1
-rwxr-xr-x 1 root root 182448 Aug 1 06:31 /usr/lib/libssh2.so.1.0.1
lrwxrwxrwx 1 root root 22 Nov 3 09:07 /usr/lib/libssl.so.0.9.7 -> /usr/lib/libssl.so.1.1
-rwxr-xr-x 1 root root 246204 Jun 14 2017 /usr/lib/libssl.so.0.9.8
lrwxrwxrwx 1 root root 22 Nov 3 09:07 /usr/lib/libssl.so.1.0.0 -> /usr/lib/libssl.so.1.1
-rw-r--r-- 1 root root 297412 Jun 13 2021 /usr/lib/libssl.so.1.0.2
-rwxr-xr-x 1 root root 405624 Aug 1 06:08 /usr/lib/libssl.so.1.1
help me :)
now :
lrwxrwxrwx 1 root root 22 Jan 1 1970 /usr/lib/libssl.so.0.9.7 -> /usr/lib/libssl.so.1.1
-rwxr-xr-x 1 root root 246204 Jun 14 2017 /usr/lib/libssl.so.0.9.8
lrwxrwxrwx 1 root root 22 Jan 1 1970 /usr/lib/libssl.so.1.0.0 -> /usr/lib/libssl.so.1.1
-rw-r--r-- 1 root root 297412 Jun 13 2021 /usr/lib/libssl.so.1.0.2
-rwxr-xr-x 1 root root 405624 Aug 1 06:08 /usr/lib/libssl.so.1.1
lrwxrwxrwx 1 root root 24 Nov 3 18:06 /usr/lib/libssl.so.3 -> /usr/lib/libssl.so.1.0.2
lrwxrwxrwx 1 root root 17 Jan 1 1970 /usr/lib/libcrypt.so.2 -> libcrypt.so.2.0.0
-rwxr-xr-x 1 root root 197952 Aug 1 06:08 /usr/lib/libcrypt.so.2.0.0
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.0.9.7 -> /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.0.9.8 -> /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.1.0.0 -> /usr/lib/libcrypto.so.1.1
-rw-r--r-- 1 root root 1390960 Jun 13 2021 /usr/lib/libcrypto.so.1.0.2
-rwxr-xr-x 1 root root 1841360 Aug 1 06:08 /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Nov 3 18:12 /usr/lib/libcrypto.so.3 -> /usr/lib/libcrypto.so.1.1
/usr/lib/libssl.so.3: version `OPENSSL_3.0.0' not found
:(
suggestions ?
Display Morehi
With : oscam-11725-798.armv7ve-libusb
open pli 8.3
error while loading shared libraries: libssl.so.3: cannot open shared object file: No such file or directory
lrwxrwxrwx 1 root root 16 Nov 3 06:16 /usr/lib/libssh2.so.1 -> libssh2.so.1.0.1
-rwxr-xr-x 1 root root 182448 Aug 1 06:31 /usr/lib/libssh2.so.1.0.1
lrwxrwxrwx 1 root root 22 Nov 3 09:07 /usr/lib/libssl.so.0.9.7 -> /usr/lib/libssl.so.1.1
-rwxr-xr-x 1 root root 246204 Jun 14 2017 /usr/lib/libssl.so.0.9.8
lrwxrwxrwx 1 root root 22 Nov 3 09:07 /usr/lib/libssl.so.1.0.0 -> /usr/lib/libssl.so.1.1
-rw-r--r-- 1 root root 297412 Jun 13 2021 /usr/lib/libssl.so.1.0.2
-rwxr-xr-x 1 root root 405624 Aug 1 06:08 /usr/lib/libssl.so.1.1
help me :)
now :lrwxrwxrwx 1 root root 22 Jan 1 1970 /usr/lib/libssl.so.0.9.7 -> /usr/lib/libssl.so.1.1
-rwxr-xr-x 1 root root 246204 Jun 14 2017 /usr/lib/libssl.so.0.9.8
lrwxrwxrwx 1 root root 22 Jan 1 1970 /usr/lib/libssl.so.1.0.0 -> /usr/lib/libssl.so.1.1
-rw-r--r-- 1 root root 297412 Jun 13 2021 /usr/lib/libssl.so.1.0.2
-rwxr-xr-x 1 root root 405624 Aug 1 06:08 /usr/lib/libssl.so.1.1
lrwxrwxrwx 1 root root 24 Nov 3 18:06 /usr/lib/libssl.so.3 -> /usr/lib/libssl.so.1.0.2
lrwxrwxrwx 1 root root 17 Jan 1 1970 /usr/lib/libcrypt.so.2 -> libcrypt.so.2.0.0
-rwxr-xr-x 1 root root 197952 Aug 1 06:08 /usr/lib/libcrypt.so.2.0.0
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.0.9.7 -> /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.0.9.8 -> /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Jan 1 1970 /usr/lib/libcrypto.so.1.0.0 -> /usr/lib/libcrypto.so.1.1
-rw-r--r-- 1 root root 1390960 Jun 13 2021 /usr/lib/libcrypto.so.1.0.2
-rwxr-xr-x 1 root root 1841360 Aug 1 06:08 /usr/lib/libcrypto.so.1.1
lrwxrwxrwx 1 root root 25 Nov 3 18:12 /usr/lib/libcrypto.so.3 -> /usr/lib/libcrypto.so.1.1
/usr/lib/libssl.so.3: version `OPENSSL_3.0.0' not found
:(
suggestions ?
use this oscam friend :
11724 is ok
Starttime: 03.11.2023 18:33:58
Version: oscam-1.20_svn-r11724-798
Compiler: arm_cak7-icam_(samur)
Good morning, sorry if I ask the same question again, is it possible to know which link to put in emm url ?
......eliminati i link ........
Thank you very much!
hi Samur, please is it possible to have oscam with ipv6 for my raspy4. thanks
I replaced my oscam bin file in usr/bin with the mipsel one shared on page one for my Vu+ zero, I also changed the file permission to the replacement bin file to 777, but now I can't access webif. I get an error OScam webif disabled.
I am using openATV 7.1
Can someone tell why did this happen? My oscam.config webif settings remained the same.
Display Moretest...ok 100x100 oscam.conf...DM920 Arm
[global]
logfile = /tmp/oscam.Smargo.Emm.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -1
waitforcards = 0
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
dropdups = 1
lb_nbest_readers = 4 #[ To request import ecm from (Number) of readers ]
lb_nfb_readers = 4
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws = 1
[newcamd]
port = 127.0.0.1@183E:000000,005411
key = 0102030405060708091011121314
keepalive = 1
[cache]
max_time = 15
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 0
stream_relay_ctab = FFFE
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only. Other images just 4 or 0]
delayer = 60
request_mode = 1
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]
boxtype = dreambox #[ For enigma2 use (dreambox) And For spark or neutrino use (duckbox) ]
[webif]
httpport = 8888
httpuser = root
#httptpl = /etc/tuxbox/config/tpl/
httppiconpath = /media/ba/picon
httprefresh = 30
httpshowpicons = 1
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
http_status_log = 1
httputf8 = 0
httposcamlabel = Oscam
httpemmsclean = 0
httpemmgclean = 0
I did the test...I deactivated the gold card and within 4 minutes it lit up...with that config.
Effectively it was dependend on oscam.conf and oscam.user config files.
Samur's compiled version of Oscam was updating on Android OS of my AmikoA5 combo 4k the emm's. Same box was updating nothing on Enigma2 OpenAtv6.2.
So I copied and pasted the files oscam.conf and oscam.user from AmikoA5 Android side to Enigma2 side and now it work fine also in Enigma2.
So, if Samur's compiled oscam is working and running with the right config files I confirm to all that currently they are working fine.
I share here my files
# oscam.comf
[global]
logfile = /tmp/oscam.log
nice = -1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = locale
[webif]
httpport = 8888
httprefresh = 13
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255,127.0.0.1
http_status_log = 1
Display More
Display MoreDisplay MoreGood morning, sorry if I ask the same question again, is it possible to know which link to put in emm url ?
https://pastebin.com/raw/JJ3TCsGV
https://rentry.co/ognzc/raw
https://pastebin.com/raw/ZNKDRVWT
Thank you very much!Seems to me all update.
....BC13530A212D466561686
not found (337 ms)
Something is wrong. Whatever I do, it stopped writing EMM to the card. Nothing happens.
UPDATE: Had to completely reboot oscam. That fixed it.
Display More
Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.
emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
CodeDisplay More[reader] label = Tivusat_183E protocol = internal device = /dev/sci0 autospeed = 0 caid = 183E rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 detect = cd mhz = 368 cardmhz = 368 nagra_read = 1 ident = 183E:000000,005411 group = 1 emmcache = 1,1,2,0 blockemm-unknown = 1 auprovid = 005411
##
2)_ Remotely activation (client side):
clients (cccam, newcamd and camd3x) also can send the EMM to the server side,
CodeDisplay More[reader] label = cccam- client protocol = cccam device = host,port user = xxxx password = xxxx inactivitytimeout = 30 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 group = 1 cccversion = 2.3.2 ccckeepalive = 1
emm_url: in the config, still working .
So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before
and we use the second way (Remotely activation).
emm_reload_minute = , the default value is 60, so after the activation you can change the value to : 14400 (10 days)
the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 60 minutes
##
debug 64 for log parsing if you want to see details:
Or put in oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11724-798
# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
initial_debuglevel = 64
...
..
.
Good luck !
;
hi guys!
which oscam version should I install for Octagon SF8008? thx!
Display MoreDisplay More
Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.
emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
CodeDisplay More[reader] label = Tivusat_183E protocol = internal device = /dev/sci0 autospeed = 0 caid = 183E rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 detect = cd mhz = 368 cardmhz = 368 nagra_read = 1 ident = 183E:000000,005411 group = 1 emmcache = 1,1,2,0 blockemm-unknown = 1 auprovid = 005411
##
2)_ Remotely activation (client side):
clients (cccam, newcamd and camd3x) also can send the EMM to the server side,
CodeDisplay More[reader] label = cccam- client protocol = cccam device = host,port user = xxxx password = xxxx inactivitytimeout = 30 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 group = 1 cccversion = 2.3.2 ccckeepalive = 1
emm_url: in the config, still working .
So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before
and we use the second way (Remotely activation).
emm_reload_minute = , the default value is 60, so after the activation you can change the value to : 14400 (10 days)
the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 60 minutes
##
debug 64 for log parsing if you want to see details:
Or put in oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11724-798
# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
initial_debuglevel = 64
...
..
.
Good luck !
;
hi guys!
which oscam version should I install for Octagon SF8008? thx!
1*
cek...SSL....in telnet.....ls -l /usr/lib/libss*.*
2*
OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2
OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.1.1
Display MoreDisplay MoreDisplay More
Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.
emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
CodeDisplay More[reader] label = Tivusat_183E protocol = internal device = /dev/sci0 autospeed = 0 caid = 183E rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 detect = cd mhz = 368 cardmhz = 368 nagra_read = 1 ident = 183E:000000,005411 group = 1 emmcache = 1,1,2,0 blockemm-unknown = 1 auprovid = 005411
##
2)_ Remotely activation (client side):
clients (cccam, newcamd and camd3x) also can send the EMM to the server side,
CodeDisplay More[reader] label = cccam- client protocol = cccam device = host,port user = xxxx password = xxxx inactivitytimeout = 30 emm_url = https://rentry.co/ognzc/raw emm_reload_minute = 10 group = 1 cccversion = 2.3.2 ccckeepalive = 1
emm_url: in the config, still working .
So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before
and we use the second way (Remotely activation).
emm_reload_minute = , the default value is 60, so after the activation you can change the value to : 14400 (10 days)
the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 60 minutes
##
debug 64 for log parsing if you want to see details:
Or put in oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11724-798
# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
initial_debuglevel = 64
...
..
.
Good luck !
;
hi guys!
which oscam version should I install for Octagon SF8008? thx!
1*
cek...SSL....in telnet.....ls -l /usr/lib/libss*.*
2*
OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2
OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.1.1
thanks piter! after a long absence I am back!
Don’t have an account yet? Register yourself now and be a part of our community!