Hello everyone,
I have a problem with my H9S SE decoder. The only sign of life is the glowing white logo on the front of the receiver. After connecting the LAN cable, the LEDs do not blink. I have read a lot of threads about similar symptoms and have not found a solution. I tried to upload different versions of recovery_emmc.zip (openpli, opeatv, openvix, egami, openspa, pureE2). I tried different USB sticks. I did this by unpacking the contents of recovery_emmc into the root of the USB, placing it on the back of the receiver and running it with the reset button. No effects. Finally, I decided to use HiTool and a USB-TTL converter. In the terminal, after starting the receiver, I get such messages:
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:57:41
Reg Version: v1.6.0\
Reg Time: 2019/05/22 22:44:01
Reg Name: hi3798mv2dmp_hi3798mv200_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
Display More
And nothing more.
Fastboot flashing fails.
When I want to flash EMMC I get the following messages:
Platform Version: 4.0.4
HiBurn Version: 5.0.1
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2014
Mod: Hi3798MV200
Platform Version: 4.0.4
HiBurn Version: 5.0.1
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2014
Mod: Hi3798MV200
SerialPort has been connented, Please power off, then power on the device.
If it doesn't work, please try to repower on.;
Bootrom start
Boot Media: eMMC
######################################### ---- 9%
######################################### ---- 19%
######################################### ---- 29%
######################################### ---- 39%
######################################### ---- 49%
######################################### ---- 59%
######################################### ---- 69%
######################################### ---- 79%
######################################### ---- 89%
######################################### ---- 99%
# ---- 100%
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:57:41
Reg Version: v1.6.0\
Reg Time: 2019/05/22 22:44:01
Reg Name: hi3798mv2dmp_hi3798mv200_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
failed to wait the boot to run
Failed to download fastboot!
Display More
Znalazłem tez HiTool w wersji 5.3.1.2. Tutaj ostatni komunikat jest nieco inny:
SerialPort has been connented, Please power off, then power on the device.
If it doesn't work, please try to repower on.
Bootrom start
Boot Media: eMMC
######################################### ---- 9%
######################################### ---- 19%
######################################### ---- 29%
######################################### ---- 39%
######################################### ---- 49%
######################################### ---- 59%
######################################### ---- 69%
######################################### ---- 79%
######################################### ---- 90%
######################################### ---- 100%
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:57:41
Reg Version: v1.6.0\
Reg Time: 2019/05/22 22:44:01
Reg Name: hi3798mv2dmp_hi3798mv200_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
Failed to wait the boot to run.
The boot code uses the debug or release version, and the bootstrap burning function is disabled. When this problem occurs, select the programmer file for burning.
Failed to download fastboot!
Display More
I don't have any ideas at the moment. What else can I do?