Hi...someone know if its possibile to installo the same firmware of the octagon SF 8008?
My two are the same.
| ||||||
| Supreme |
| System OE: | OE-Alliance 5.3 |
| Firmware version: | openATV 7.3.20240218 (2024-01-30) |
| Kernel / Drivers: | 4.4.35 / 20240104 |
OCTAGON SF 8008 4K SUPREME
- piratt
- Thread is marked as Resolved.
There are 45 replies in this Thread which was already clicked 19,612 times. The last Post () by Najeeb khan.
-
-
Ciao...qualcuno sa se è possibile installare lo stesso firmware dell'ottagono SF 8008?
I miei due sono uguali.
OE del sistema: Alleanza OE 5.3 Versione del firmware: openATV 7.3.20240218 (30/01/2024) Kernel/driver: 4.4.35/20240104 Supremo OE del sistema: Alleanza OE 5.3 Versione del firmware: openATV 7.3.20240218 (30/01/2024) Kernel/driver: 4.4.35/20240104 So...you have both of them...according to your opinion what is the most difference?
-
So you put a backup of the sf8008 there?
-
So you put a backup of the sf8008 there?
Downloaded something to start. Possibly openatv-7.0-defineos-sf8008-20221125_recovery.zip
-
So you put a backup of the sf8008 there?
Downloaded something to start. Possibly openatv-7.0-defineos-sf8008-20221125_recovery.zip
I didn't quite understand if you've already put a backup of your normal SF 8008 on it
-
So you put a backup of the sf8008 there?
Downloaded something to start. Possibly openatv-7.0-defineos-sf8008-20221125_recovery.zip
I didn't quite understand if you've already put a backup of your normal SF 8008 on it.
My normal didn't have Define Os and I wanted to try it so I searched for the recovery with it. I messed up whatever it came with. -
I have a isssue with this box. I just received the SF8008 SUPREME and I have installed OPENpli 9.1 in one of the slots and OPEN atv in another slot. I have been through the install wizard with OPENPli and I have set up the tuner as a simple and have my LNB set to universal. When I try to scan, it instantly tells me scan complete and there is nothing there.
I booted into the OPENatv and it allowed me to scan channels in.
What am I doing wrong/or not doing that I need to get scanning channels?
Thanks for any help.
-
This box is causing problems for everyone who bought it.
Better not buy this box.
-
@piplan1966 You're writing nonsense. Try to think about, for example, that if it can scan in OpenATV and not in Openpli, then wouldn't there be some problem in the image where it can't ?
-
I tested a model (8008 Supreme) with OpenATV 7.4 and OpenPli 9 for several weeks without encountering any particular problem.
-
@piplan1966 You're writing nonsense. Try to think about, for example, that if it can scan in OpenATV and not in Openpli, then wouldn't there be some problem in the image where it can't ?
I see perfect sense in what I wrote. It scans with OPEN ATV and doesn't with OPENPLI. Therefore the problem is with OPENPLI and this box. I see several saying this box is not to be bought and I am in full agreement right now. Seems this thing is possessed.
-
I tested a model (8008 Supreme) with OpenATV 7.4 and OpenPli 9 for several weeks without encountering any particular problem.
When you booted into Open PLI, did you have to do anything other than follow the install wizard? I get a error telling me that it does not have a LNB. I connect my edision to it and it has no issues. I am sure it is a configuration problem but I can not figure it out. Looking for help with it.
-
This box is causing problems for everyone who bought it.
Better not buy this box.
I got it but zero problems...
-
is the best Octagon sf8008 4k
-
@piplan1966 You're writing nonsense. Try to think about, for example, that if it can scan in OpenATV and not in Openpli, then wouldn't there be some problem in the image where it can't ?
I see perfect sense in what I wrote. It scans with OPEN ATV and doesn't with OPENPLI. Therefore the problem is with OPENPLI and this box. I see several saying this box is not to be bought and I am in full agreement right now. Seems this thing is possessed.
So once again, and slo-w-ly, even for the slow ones.
You write clearly:
"....I booted into the OpenATV and it allowed me to scan channels in...."
So if you were able to scan under OpenATV and it doesn't work under OpenPLI, then either you don't know how to operate the device properly or there is a problem in OpenPLI and that should be reported to the OpenPLi team and not to slander Octagon.
And that's all from my side to you, because here too, there's no need to waste time with you over nonsense.
-
I have SF8008 Supreme with OpenATV 7.5 and it works well. Gave up on OpenPLI as it wasn't as stable.
-
Octagon sf8008 supreme tiwin 4K
Finds channels directly in all software
Abertis MultiStream finds it directly
OpenPLİ 9.1
16.0E Eutelsat 16A MultiStream finds it directly
OpenPLİ 9.1
16.0E Eutelsat 16A T2-MI finds it directly
-
Display More
@piplan1966 You're writing nonsense. Try to think about, for example, that if it can scan in OpenATV and not in Openpli, then wouldn't there be some problem in the image where it can't ?
I see perfect sense in what I wrote. It scans with OPEN ATV and doesn't with OPENPLI. Therefore the problem is with OPENPLI and this box. I see several saying this box is not to be bought and I am in full agreement right now. Seems this thing is possessed.
So once again, and slo-w-ly, even for the slow ones.
You write clearly:
"....I booted into the OpenATV and it allowed me to scan channels in...."
So if you were able to scan under OpenATV and it doesn't work under OpenPLI, then either you don't know how to operate the device properly or there is a problem in OpenPLI and that should be reported to the OpenPLi team and not to slander Octagon.
And that's all from my side to you, because here too, there's no need to waste time with you over nonsense.
I am not slandering Octagon, at least I am not slandering them intentionally. I have asked for assitance/advice on how to use this box with OPENPLI. If it has offended you, it was not intentional. If you want to slander my intelligence level, that is a different story. I did not ask you for a condescending attitude and your replies definitely appear to be that to me. Now, if anyone would like to offer some assistance with OPENpli on this box, I would appreciate it.
-
Display More
Octagon sf8008 supreme tiwin 4K
Finds channels directly in all software
Abertis MultiStream finds it directly
OpenPLİ 9.1
16.0E Eutelsat 16A MultiStream finds it directly
OpenPLİ 9.1
16.0E Eutelsat 16A T2-MI finds it directly
TO install the OPENPLI, I followed the process through a new install. Is there anything else that needs to be done to allow the LNB to be seen by the software?
-
@piplan1966 You're writing nonsense. Try to think about, for example, that if it can scan in OpenATV and not in Openpli, then wouldn't there be some problem in the image where it can't ?
Yes, that is what I am trying to say. OpenPLI has an issue and I cant figure out what the issue is. I plan on flashing the box again, after a factory reset, and see if I can get it to work that way. It seems I have irritated some people on here and it was not intentional. I am just trying to get some ideas on why openpli can not see a LNB. The configuration for the LNB has been checked, OPEN ATV works with it. Any ideas what might be the problem? Thanks for the reply
OCTAGON SF8008 * SUPREME 4K UHD Linux Enigma 2 2160p H.265 HEVC Dual Wifi Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
