OpenPli 9

I realized that OpenPli 9 is another crap job I have to say
I'm hating this latest news

Zetagemma H2H...BackupSuite

What's the point of having feeds if your plugins no longer work?

it's useless to have them

the backup is not possible, it stops at a certain point and goes into catalepsy, the decoder no longer works
the catalepsy remains forever you just have to disconnect the cord to restart it... my Maroni actually broke.

I hope that those who are part of the temple check otherwise it's a bad logo that was put up... from 2024... what's the point if you can't keep this soft one.

the new backup works but not with their feeds,
after 4 hours of testing,
I know how to get by, I'm quite expert on almost all decoders
I had to find another backupflashe plugin which is a plugin for the DM 920 develop and works on the Zetagemma H2H which is a soft Mips,

I would like to see if other users on all the forums can make a backup of Pli9 on the Zetagemma.

I did another test and tried to restore the Zetagemma with the backup made with the backupflashe plugin...and it doesn't work, this is also not good...I confirm that there is no possibility of making a backup after 8 hours of testing.

what's the point of making a soft and not being able to save it for a possible future,

suspended..deleted it from my archive.

Quote from abu baniaz

If you want the problem fixed, please provide a log, I will forward it to the PLI forum and somebody will have a look when they get a chance.. What do you mean by "soft"?

OpenPli 9 on the Zetagemma

BackupSuite....

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***

***** https://github.com/persianpros/BackupSuite-PLi ******

Plugin version = 3010f02

Back-up media = /media/usb

Filesystem Size Used Available Use% Mounted on

/dev/sda1 7.2G 135.6M 7.1G 2% /media/usb

Back-up = 2023.12.29_14:25

Version = openpli 9.0-release

Flashed = 2023.12.25_03:25

Updated = 2023.12.29_14:23

Drivers = zgemma-dvb-modules-h3 - 4.10.12-20180830-r0.0

Enigma2 = 2023-11-17-release-9.0

Working directory = /media/usb/bi

Not Open Vision, OpenPLi or SatDreamGr maybe?

Destination = /media/usb/zgemma/h3

RECEIVER = Zgemma H3

MKUBIFS_ARGS = -m 2048 -e 126976 -c 8192

UBINIZE_ARGS = -m 2048 -p 128KiB

KERNEL dimensione del backup: 6144 KB

ROOTFS dimensione del backup: 114756 KB

=TOTAL dimensione del backup: 120900 KB (= 118 MB)

Si prega di essere pazienti, un backup sarà eseguito e impiegherà circa: 8.03 Minuti

*** FIRST SOME HOUSEKEEPING ***

Remove directory = /media/usb/bi

Recreate directory = /media/usb/bi

Create directory = /tmp/bi/root

UBINIZE.CFG CREATED WITH THE CONTENT:

[ubifs]

mode=ubi

image=/media/usb/bi/root.ubi

vol_id=0

vol_type=dynamic

vol_name=rootfs

vol_flags=autoresize

--------------------------

Creando: Kerneldump

Kernel resides on mtd1

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

all it does is this stops like this and stays forever

USB folder

bi

root.ubi

ubinize.cfg

finished everything and 'this without any result very nice Py3

IMG_20231229_145453.jpg

Now I'm going to test this openpli-develop-h3 and see if it has the same problem

IMG_20231229_153457~2.jpg

1* left is saving openpli-develop-h3
2* right what I had saved openpli-9.0-release-h3-20231225

there is a difference and it seems to me that the FullBackup plugin works with this openpli-develop-h3 soft

I sang too early, the decoder stopped, it no longer responds and with remote DCC it won't let me in anymore..