no boot Zgemma h10 combo

Press Ctrl+C to stop autoboot

and get boot info

tiping "help"

try this

Thread

How TO Flash Zgemma H 9 Combo + Twin

This is a basic guide to USB flash a local image zip file to the Zgemma H9 Combo +TWIN.


User will require a USB stick formatted FAT32.


1) Download your chosen image.


2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.


3) Power off the Zgemma H9 Combo and connect the USB stick front USB port behind front flap.


4) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN reset black baten on the back


5) Once you're booted into the Multiboot recovery menu…

esmeralda1

Sep 29th 2019

try with this

https://images.mynonpublic.com/openatv/6.3/zgemmah10combo/openatv-6.3-zgemmah10combo-20210112_full_recovery_emmc.zip

Quote from Marchella

Quote from gobi2000

Press Ctrl+C to stop autoboot

and get boot info

Code

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.01.08 14:04:07 =~=~=~=~=~=~=~=~=~=~=~=

Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK

lsadc voltage min: 000002FE, max: 00000301, aver: 000002FF, index: 00000001

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:57:41

Reg Version:  v1.6.0\
Reg Time:     2019/05/23 16:52:25
Reg Name:     hi3798mv2dmb_hi3798mv200_DDR4-2133_2GB_16bitx2_2layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (h10@builder) (May 25 2019 - 13:59:27)

Fastboot:      Version 3.3.0
Build Date:    May 25 2019, 14:02:06
CPU:           Hi3798Mv200 
Boot Media:    eMMC
DDR Size:      2GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:131 endp:110
Tuning SampleClock. mix set phase:[02/07] ele:[12/18] 
MMC/SD Card:
    MID:         0x15
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   14910M Bytes (High Capacity)
    Name:        "AJTD4R"
    Chip Type:   MMC
    Version:     5.1
    Speed:       100000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes



*******************************

serial: xxxxxxxxxxxxxxxx
mac:   xxxxxxxxxxxxxxx

*******************************

Net:   eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, downWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: ZGEMMA-H10

mac:00:17:9A:26:31:C8
Reserve Memory
    Start Addr:          0x7A8FE000
    Bound Addr:          0x8D81000
    Free  Addr:          0x791F7000
    Alloc Block:  Addr         Size
                  0x7A4FD000   0x400000
                  0x7A1FC000   0x300000
                  0x7A1F9000   0x2000
                  0x7A178000   0x80000
                  0x79B88000   0x5EF000
                  0x7939E000   0x7E9000
                  0x7939A000   0x3000
                  0x79204000   0x195000
                  0x791FA000   0x9000
                  0x791F7000   0x2000

reading STARTUP_ONCE

0 bytes read
Total of 1 byte were the same
Total of 1 byte were the same
reading STARTUP

225 bytes read
byte at 0x01000000 (0x62) != byte at 0x04000000 (0x00)
Total of 0 bytes were the same
Press Ctrl+C to stop autoboot
fastboot# <INTERRUPT>

Display More

Yo hawe stop fasboot ok, hawe image output hdmi from recovery menu ?