i no this
image and satllite positioner
- car123
- Thread is marked as Resolved.
-
-
-
-
Thanks that helps with those new to the boxes.
But IMO it is confusing as f*#k
VU should have kept it simple and labelled it slot 1, 2, 3.
IMO e2 also gets it wrong.....the single/double tuner slot (aka "Tuner C") should always be labelled as Q and/or R and not changeable to I and/or J if using the middle slot.
For example with my STB:
i have a twin FBC tuner in tuner slot A (but normally have disabled it within the tuner configs.)
I have nothing in tuner slot B
I have a twin tuner in tuner slot C which is in use, and those come up as tuner I and J - just as you have pictured.
Agreed about identifying the tuner slots. This is nothing new, it affected old/ original/ non-4K Ultimo and Duo 2, so you 'd think they would have learned.
Not so sure about the tuner letters. It is always incremental, just like the person who had the loose tuner card in his Zgemma. Also, what about someone using the MTSIF Terrestrial tuners? They are only two tuners. So starting slot B from "I" could confuse issues more. And even then what would happen to USB tuners? Always start at "S"?
BTW, there is no such thing as single FBC, it is always a block of 8 tuners for satellite and cable, two with physical connections. Also, It would be better to use the FBC tuner instead of the legacy satellite tuner.
-
yup like you say it is an old problem, VU themselves have all but disappeared anyways so not likely to see any change there anytime soon.
-
i dont no what u mean at all could explain u have lost me
-
All that you need to know is:
1. the tuner letters will change when you add the new tuner card. Set them again.
2. Make sure you do not set satellites that you cannot receive on the tuner connected to your motorised dish. I.e 39e. That way the receiver cannot use the motorised dish for it. If will use the fixed dish for 39e
Wiil be good to show this thread to your installer.
-
were is the stream relay in the vix image for sky i cant find it
-
Iv got there in the end
-
It seems that car123 has done something better. He has attached the wires from the motorised dish to the new FBC tuner. This means that his tuner configuration does not have to be changed because the motorised dish is still connected to his tuner I.
When his installer connects the two wires from the 39e dish, tuners Q and R can be set as simple, single, 39e.
-
what satellites can u get then
-
U. Abaut
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!