Rsi la 1 e rsi la 2

Quote from piterfree

Quote from piterfree

ok...oscam.conf...maine

+++++++++++++++++++++++++

[global]

logfile = /tmp/oscam.smargo.log

clienttimeout = 12000

fallbacktimeout = 3000

bindwait = 35

initial_debuglevel = 64

netprio = 1

nice = -1

maxlogsize = 1024

waitforcards = 0

waitforcards_extra_delay = 200

preferlocalcards = 2

readerrestartseconds = 1

dropdups = 1

reload_readers = 1

reload_provid = 1

reload_services_ids = 1

reload_tier_ids = 1

reload_log = 1

block_same_ip = 0

block_same_name = 0

lb_nbest_readers = 4

lb_nfb_readers = 4

ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j

needsemmfirst = 1

disablecrccws = 1

[cache]

[radegast]

port = 9090

allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255

user = dvbapiau

[streamrelay]

stream_relay_enabled = 1

stream_ecm_delay = 5

stream_relay_ctab = 098D

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

delayer = 60

user = dvbapiau

read_sdt = 1

write_sdt_prov = 1

[webif]

httpport = 8888

httpuser = root

httptpl = /etc/tuxbox/config/

httppiconpath = /media/ba/picon

httprefresh = 23

httpshowpicons = 1

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

http_status_log = 1

Display More

[webif]

httpport = 8888

httpuser = root

Display More

I have tried several times with http://192.168.178.X:8888. (Computer Ip:8888) Connection failed. Not even with 8080 I can only connect with Webif.

with win_7 I have no problem then it also depends on what image you have on it, with OpenPli it's perfect it works at the first start, you should also check the OpenWeb plugin how you set it...sometimes you just need to restart the decoder when you're on the web........

Now I've done it with my cell phone and I don't notice any problems with Mozilla

Screenshot_20240401-190735~2.png

Quote from piterfree

Screenshot_20240401-190735~2.png

I solved the connection. The problem was the bin I put back the original one ( OSCam_11718-r798) removing the one from Samur and everything worked like your screenshot. Now I will try to see for TVSat.

reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

[reader]

Label = tivurat

detect = CD

Protocol = internal

Device = /dev/sci1

ident = 183D:000000,005411;183E:000000,005411

cardmhz = 368

mhz = 357

#Fallback = 0

Group = 1

caid = 183E,183D

auprovid = 005411

nagra_read. = 2

emmcache = 1,3,2,0

tiger_rsakey = A9........B5

TvSat does not work with this setup. Suggestions?

trismi2001

reverse the 2 Caids

ident = 183D:000000,005411;183E:000000,005411

ident = 183E:000000,005411;183D:000000,005411

then you use the 183D you still have the card....if you have the Gold I'll put him to do that Caid...????

Quote from piterfree

reverse the 2 Caids

ident = 183D:000000,005411;183E:000000,005411

ident = 183E:000000,005411;183D:000000,005411

then you use the 183D you still have the card....if you have the Gold I'll put him to do that Caid...????

Display More

Tried reversing as you proposed but nothing I tried both with the blue card (the first card issued) and then with the gold card. I don't understand why it doesn't work. In the oscam.conf, oscam.user, oscam.dvbapi is there nothing to review? These files are the ones you gave me.

Thanks.

trismi2001

You can find these in the new posts on the web.

oscam.provid

oscam.services

oscam.srvid

oscam.srvid2

Quote from trismi2001

Quote from piterfree

Screenshot_20240401-190735~2.png

I solved the connection. The problem was the bin I put back the original one ( OSCam_11718-r798) removing the one from Samur and everything worked like your screenshot. Now I will try to see for TVSat.

reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

[reader]

Label = tivurat

detect = CD

Protocol = internal

Device = /dev/sci1

ident = 183D:000000,005411;183E:000000,005411

cardmhz = 368

mhz = 357

#Fallback = 0

Group = 1

caid = 183E,183D

auprovid = 005411

nagra_read. = 2

emmcache = 1,3,2,0

tiger_rsakey = A9........B5

TvSat does not work with this setup. Suggestions?

trismi2001

Display More

[reader]

Label = tivurat...Tivusat

detect = CD

Protocol = internal

Device = /dev/sci1...0....???

tiger_rsakey = A9........B

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

ident = 183D:000000,005411;183E:000000,005411

cardmhz = 368

mhz = 357

#Fallback = 0

Group = 1

caid = 183E,183D

auprovid = 005411

nagra_read. = 2

emmcache = 1,3,2,0

+++++++++++++++++++++++++++++++++++++++++++++++++++

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

you've forgotten these

add or correct written in green

ok...rsakey =...I know it works but I still need to add those 2 lines

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

delete the RSA that you posted risks being banned...!!!