OSCam For M7...!!!

You are quite right!

Here is a short log. (disabeled 0624 reader ,in order not to have conflict.) Using Oscam 11523 'Lb2. Card is read Ok and AU , but no picture. ....(While with 0624 no problem at all..) -Any Help??

• 2024/03/31 17:24:02 4A93F47B r (reader) Direct_One-Ir [irdeto] dvbapi emmtype=shared, len=63 (hex: 0x3F), cnt=0: written (121 ms)
• 2024/03/31 17:24:06 329FE87D c (ecm) dvbapi (0653@000000/7531/78C4/44:F8B8481C5DBE7423FA6C1D73BF73BAEB): found (71 ms) by Direct_One-Ir - Duna TV
• 2024/03/31 17:24:16 329FE87D c (ecm) dvbapi (0653@000000/7531/78C4/44:D78B79E0EAEC6FDFD36014B2EF9F7E78): found (70 ms) by Direct_One-Ir - Duna TV
• 2024/03/31 17:24:24 4A93F47B r (reader) Direct_One-Ir [irdeto] dvbapi emmtype=shared, len=63 (hex: 0x3F), cnt=0: written (122 ms)
• 2024/03/31 17:24:26 329FE87D c (ecm) dvbapi (0653@000000/7531/78C4/44:E2CE77D1BF4D70957FAB92571AB72494): found (71 ms) by Direct_One-Ir - Duna TV
• 2024/03/31 17:24:36 329FE87D c (ecm) dvbapi (0653@000000/7531/78C4/44:962F2E8DE7D7DDE9678FA775AB5A5FBE): found (72 ms) by Direct_One-Ir - Duna TV

pasted-from-clipboard.png

And why are you knitting some old oscam 11523 into Samura's thread ?

Put the last Samur 11750 there and you will have a picture.

Post

RE: Samur's OSCam - Request for compilation, questions and help !!!

(Quote from Warder)

0624 Fixed.

samur

Mar 22nd 2024

Many thanks for the fast reply!

Which version of it? (Libusb?)

All are supported by Libusb. You just choose according to your device, whether you have MIPS, ARM or Aarch64.

Many thanks!

Now Ok (Mipsel for DM7080)

(ARM -for 920..)

Works like a dream....

Now I 'll seek to share with Bullsat....

Regards!

@ Samur

Hi. oscam oscam-11759.aarch64-libusb works fine with M7 card on Raspberry RPi4 x64 raspbian in home network. The image is right after the restart. Thank you for your work

Quote from marci70

@ Samur

Hi. oscam oscam-11759.aarch64-libusb works fine with M7 card on Raspberry RPi4 x64 raspbian in home network. The image is right after the restart. Thank you for your work

hi. it's the same with the last binary OSCam-11764-801 (aarch64 libusb) , no problem

Skylink funktioniert,leider geht dann die orf Karte 0d98 nicht mehr .

In 0D98 ORF laufen doch alle Sender !

Was soll da nicht laufen?

Sobald ich eine OSCam mit Lb2 installiere geht die orf Karte nicht mehr ,aber mit normaler oscam gehen in 0D98 orf alle Sender .

Unfortunately, orf constantly needs updates in irdeto mode

This works for me via an extra card with CAID 0648 (Austria Plus)

But the Orf card with caid 0D98.

Don't understand why the caid 0D98 no longer works with your Oscam?

Why does this affect this Caid when all the others are running?

1838

1830

0624

Everyone goes

I have the Card in STB and is Nice !

which emm can you block?

Seltsam ist nur im Receiver wo Skylink Karte steckt geht alles aber wenn ich zu anderem Receiver Share gehen nicht alle Sender zb vixen Hd geht nur im Gerät wo Karte steckt.

It's strange that everything only works in the receiver where the Skylink card is inserted, but when I go to another receiver share, not all channels e.g. vixen HD only work in the device where the card is inserted.

Quote from samur

that is normal, your card needs DATA to continue decrypting and you have nothing to worry about that ...

###

AXN Black, Bergblick, Hustler, ...etc use only Irdeto now.

;

ORF.png

That's right, I have Austria HD without ORF on the old card caid 0648 irdeto and 2 cards only with ORF without Austria plus subscription. The 2 Orf cards in CW mode make everything bright, but that doesn't work with this Oscam