Black CAM 4K Tivusat not working in Zgemma H7S
-
- Zgemma OpenATV
- CI+ Module Support
- donroberto2
- Thread is marked as Resolved.
-
-
linuxsat-support.com/cms/attachment/276965/
the card must be inserted backwards with the chip facing up, then restart stb
-
do a test...check the red button plugin and uninstall all the ciplus you have installed and restart with the Cam inserted and when you restart you will see what the decoder tells you...you will have installed too many things that are now giving problems, then another thing with a battery check that some foot is not bent or missing...an acquaintance did it on a TV that now can no longer use any Cam.
-
Ok,
do a test...check the red button plugin and uninstall all the ciplus you have installed and restart with the Cam inserted and when you restart you will see what the decoder tells you...you will have installed too many things that are now giving problems, then another thing with a battery check that some foot is not bent or missing...an acquaintance did it on a TV that now can no longer use any Cam.
You're right. I found crooked pin in the CAM reader. I have to return my device to the vendor.
Thank you for your help
-
donroberto2
Selected a post as the best answer. -
And what did I advise you other than to check the cam pins?
-
The same thing had happened on my zgemma h7s
-
-
Is there any conclusion on this? How to get a 4k tivusat cam scs card to work on openatv? With or without plugin? I tried without and it could not read the card, with the card in it freezes after one second of decryption
-
The same thing had happened on my zgemma h7s
+1 Had given up with my H7 and bought a Vu. After reading this I opened it up and found this.
Many thanksIMG_1552.jpg
-
The same thing had happened on my zgemma h7s
+1 Had given up with my H7 and bought a Vu. After reading this I opened it up and found this.
Many thanksIMG_1552.jpg
Pin bent...
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
