when recording two channels if another recording starts then there is a glitch in my recording it means that one of the recordings plays only a black screen
will tell you that the ci+ does not determine how many recordings can be made
it is the Dreamboxs software that determines how many recordings can be made at once
have you solved this problem
that would be cool could 4 be recorded at once
There's a problem with the Matrix skin after the latest update: weather icons aren't showing up.
There's a problem with the Matrix skin after the latest update: weather icons aren't showing up.
Is not the update, MSN weather server is down change to openmeteo in the settings and will show the weather.
info
Don't use maxy 1.2 it crashes with it with the same after reboot
هناك مشكلة في واجهة ماتريكس بعد التحديث الأخير: أيقونات الطقس لا تظهر.
ليس التحديث، خادم الطقس الخاص بـ MSN معطل، قم بتغييره إلى openmeteo في الإعدادات وسيظهر الطقس.
Thank you so much, the problem has been solved.
هناك مشكلة في واجهة Matrix بعد التحديث الأخير: حاليًا لا يستغرق الوقت.
أحدث الأخبار هو الموضة، خادم MSN مبطل. غيّر إلى OpenMeteo في الإعدادات وسيظهر الطقس.
Thank you so much, the problem has been solved.
For some reason Ive gone to make a swap file in swap manager but there is already one there and set to /dev/mmcblk0p7 and cant delete it to make one onto my hard drive instead ? is there any way of deleting that so I can make a swap file to the hard drive instead of it being on the internal side ?
Lately, stream voice has been dropping out...
I have to change the channel and come back. Just to clarify, I'm using the updated image in the topic. I don't know if this is the cause, but to fix it, what could it be?
21:01:33.8238 [eDVBFrontend] (1)fe event: status 0, inversion off, m_tuning 1
21:01:33.8243 [eConsoleAppContainer] Starting /bin/sh
21:01:34.2254 [eDVBFrontend] (1)fe event: status 10, inversion off, m_tuning 2
21:01:34.2258 [eEPGTransponderDataReader] channel 0x33768e8 running
21:01:34.2261 [eDVBResourceManager] stop release channel timer
21:01:34.2261 [eDVBResourceManager] allocate demux cap=01
21:01:34.2261 [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=1
21:01:34.2262 [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
21:01:34.2262 [eDVBServicePlay] have 1 video stream(s) (0421), and 1 audio stream(s) (0485), and the pcr pid is 0421, and the text pid is ffffffff
21:01:34.2283 [eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
21:01:34.2284 [eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
21:01:34.2285 [eDVBServicePlay] updateAudioCache: pid=0485 type=7
21:01:34.2285 [eTSMPEGDecoder] decoder state: play, vpid=0421, apid=0485
21:01:34.2287 [eDVBTeletextParser] Starting!
21:01:34.2287 [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
21:01:34.2288 [eDVBPESReader] Created. Opening demux
21:01:34.2288 [eDVBTeletextParser] created teletext subtitle PES reader!
21:01:34.2289 [eDVBPESReader] Created. Opening demux
21:01:34.2289 [eDVBTeletextParser] starting PES reader on pid=ffffffff
21:01:34.3252 [eDVBCAService] new service 1:0:19:BBD:3A2:110:EEEE0000:0:0:0:, serviceId 2
21:01:34.3253 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:BBD:3A2:110:EEEE0000:0:0:0:
21:01:34.6880 [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
21:01:34.6887 [eDVBServicePlay] have 1 video stream(s) (0421), and 2 audio stream(s) (0485, 04e9), and the pcr pid is 0421, and the text pid is ffffffff
21:01:34.6890 [eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
21:01:34.6891 [eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
21:01:34.6891 [eTSMPEGDecoder] decoder state: play, vpid=0421, apid=0485
21:01:34.7416 [eDVBCIInterfaces] gotPMT
21:01:35.1976 [InfoBarGenerics] HbbtvApplication: (-1, 'Enabler HbbTV 2', 'http://hbbtv.mediaset.net/app/mplayhbbtvgold/backdoor.shtml', 11, 3, 0)
21:01:36.5124 [eDVBFrontend] try to close frontend 0
21:01:36.5306 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
21:01:39.5531 [Console] Processing command line 'killall -9 bitrate'.
21:01:39.5533 [eConsoleAppContainer] Starting /bin/sh
21:01:39.6018 [Console] Command 'killall -9 bitrate' finished.
21:02:17.6704 [eDVBFrontend] (1)fe event: status 0, inversion off, m_tuning 0
21:02:17.6705 [eDVBFrontend] stateLostLock
21:02:17.6706 [eDVBChannel] OURSTATE: tuner 1 lost lock, trying to retune
21:02:17.6706 [eDVBFrontend1] tune
21:02:17.6706 frontend 1 tuning dvb-t to 610000000 khz, bandwidth 8000000, modulation 3, inversion 2
21:02:17.6707 [SEC] tuner 1 newTunertype 2
21:02:17.6708 [SEC] tuner 1 startTuneTimeout 5000
21:02:17.6708 [eDVBFrontend] [SEC] tuner 1 setVoltage 0
21:02:17.6727 [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
21:02:17.6727 [SEC] tuner 1 setFrontend: events enabled
21:02:17.6727 setting frontend 1 events: on
21:02:17.8444 [eDVBFrontend] (1)fe event: status 0, inversion off, m_tuning 1For some reason Ive gone to make a swap file in swap manager but there is already one there and set to /dev/mmcblk0p7 and cant delete it to make one onto my hard drive instead ? is there any way of deleting that so I can make a swap file to the hard drive instead of it being on the internal side ?
What device i,e, reciever on newer divices and even on my gigablue quad uhd pro , with as you would think plenty of memory swap file is enabled by default rather than having to make one on say usb flashdrive or hard drive.
it just uses it when needed but have not noticed it ever beeen used when I check memory.
Display MoreFor some reason Ive gone to make a swap file in swap manager but there is already one there and set to /dev/mmcblk0p7 and cant delete it to make one onto my hard drive instead ? is there any way of deleting that so I can make a swap file to the hard drive instead of it being on the internal side ?
What device i,e, reciever on newer divices and even on my gigablue quad uhd pro , with as you would think plenty of memory swap file is enabled by default rather than having to make one on say usb flashdrive or hard drive.
it just uses it when needed but have not noticed it ever beeen used when I check memory.
Sorry using zgemma h7s !
info
Don't use maxy 1.2 it crashes with it with the same after reboot
info
don't use GradientFHD there is an error stop with player think that this plugin OAWeather that error occurs
You can report the skin author https://www.opena.tv/viewtopic…tyle=23&t=68161&start=340
You can report the skin author https://www.opena.tv/viewtopic…tyle=23&t=68161&start=340
use KravenHD instead 👍
I use the default skin and have no problems.
Does anyone know what is causing these message logs. They just churning away constantly and endlessly writing to file and slowing my box down.
Debug logs are turned off.
Maybe its an oscam or softcsa causing it.
edit - turned off oscam - still doing it
uninstalled serviceapp - still doing it
openatv 7.6 - 14 Feb - 34956+bf67516
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1b0
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003f (DTV_STAT_CNR)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (72)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (83)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties:
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.num = 1
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1a8
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003f (DTV_STAT_CNR)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (72)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (83)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties:
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.num = 1
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1b0
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003e (DTV_STAT_SIGNAL_STRENGTH)
Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000This happens when tv satellite stream is playing. Stops when iptv is playing.
Captain jbleyel
TV Abertis no active with openAtv 7.5 in my DM 900 HD
wrong lamedb
Display MoreDoes anyone know what is causing these message logs. They just churning away constantly and endlessly writing to file and slowing my box down.
Debug logs are turned off.
Maybe its an oscam or softcsa causing it.
edit - turned off oscam - still doing it
uninstalled serviceapp - still doing it
openatv 7.6 - 14 Feb - 34956+bf67516
CodeDisplay MoreFeb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1b0 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003f (DTV_STAT_CNR) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (72) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (83) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.num = 1 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1a8 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003f (DTV_STAT_CNR) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (72) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl: (83) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.num = 1 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dvb_frontend_ioctl_properties: properties.props = be46f1b0 Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.cmd = 0x0000003e (DTV_STAT_SIGNAL_STRENGTH) Feb 21 14:15:36 anadol4k kern.debug kernel: (NULL device *): dtv_property_dump: tvp.u.data = 0x00000000This happens when tv satellite stream is playing. Stops when iptv is playing.
Captain jbleyel
I just checked those logs no such entries in mines . mind you there has been four image updates since then 5 if you include todays.
I will reflash the stupid thing, if it still does it I will just go back to 7.5.1.
I cant have it grinding away like that in an endless loop.
Ok clean flash. Nothing installed, nothing removed. No logs turned on. No channels tuned in.
And if I do a channel scan, this is just going to churn away with constant errors.
Gone back to 7.5.1 now.
That was quick 7.6 only lasted 7 days on my box.
Able to confirm that behaviour but i thought it is an default internal mechanism like on any linux like distribution.
Edit: but u right on my 7.5.1 theyre no messages logs
Regards
Don’t have an account yet? Register yourself now and be a part of our community!
