Test Image for slow framebuffer issue dm920
only 3 days online
https://we.tl/t-Jk38QpTgZi
edit
After completely reboot the device, the image finally booted
OpenATV 7.6 – Discussion & New Features
-
- Latest News
- Copper_Can
- Thread is marked as Resolved.
-
-
Display More
Captain , with reguards to this Post no skin error now :)
think it was this commit but when restoring backup once finished it should run myrestore.sh if there is one present you need to exit then it runs myrestore.sh that is no big deal.
But I have found problem if you select flashonline just flash image and when it boots it will say backupsettings found do you want to restore you select yes it goes through the proccess but goes into loop does it over and over again you need to exit.
i dont have this issue, send e2 log and fastrestore log
What do you mean by e2 log do you mean debug log, enable debug does that work on clean install
Enable the debug log feature from the system options
-
Unfortunately, it is not possible to obtain the deb log to determine the cause of the channel skipping when Timeshift is enabled. Normally, when Timeshift is activated for a few seconds, the picture should pause and then resume in sync with the Timeshift.
However, the problem is that when Timeshift is enabled, the picture continues playing with freezes and glitches for a few seconds — sometimes up to 30 seconds — then the image stops completely and comes back again.
There should be a solution for this initial issue when enabling Timeshift. -
Unfortunately, it is not possible to obtain the deb log to determine the cause of the channel skipping when Timeshift is enabled. Normally, when Timeshift is activated for a few seconds, the picture should pause and then resume in sync with the Timeshift.
However, the problem is that when Timeshift is enabled, the picture continues playing with freezes and glitches for a few seconds — sometimes up to 30 seconds — then the image stops completely and comes back again.
There should be a solution for this initial issue when enabling Timeshift.I don't have this issue with openatv7.6 dm920
With my own ipaudio plugin the time shift work fine
-
Display More
Unfortunately, it is not possible to obtain the deb log to determine the cause of the channel skipping when Timeshift is enabled. Normally, when Timeshift is activated for a few seconds, the picture should pause and then resume in sync with the Timeshift.
However, the problem is that when Timeshift is enabled, the picture continues playing with freezes and glitches for a few seconds — sometimes up to 30 seconds — then the image stops completely and comes back again.
There should be a solution for this initial issue when enabling Timeshift.I don't have this issue with openatv7.6 dm920
With my own ipaudio plugin the time shift work fine
Is your device the first version or the second? My device is the second version.
Are you using the devel image version?
-
Test Image for slow framebuffer issue dm920
only 3 days online
https://we.tl/t-Jk38QpTgZiedit
After completely reboot the device, the image finally booted
first dont use devel feed , this revert the new framebuffer driver
the test image speed up painting osd, check painting menu images with old image and with the test image -
It has been several months since I reported the following issue (see my post #403), but it still hasn’t been fixed.
In Multiboot Manager, which had the same issue, it has been fixed a long time ago. In the full backup of the images, it has not.
I’m surprised that it hasn’t been reported by other users who use the multiboot feature.
Anyway, it’s nothing serious — I can live with it — but it would be helpful if you could fix it.
I’m uploading today’s screenshot for the Complete Image Backup.
-
Test Image for slow framebuffer issue dm920
only 3 days online
https://we.tl/t-Jk38QpTgZiedit
After completely reboot the device, the image finally booted
first dont use devel feed , this revert the new framebuffer driver
the test image speed up painting osd, check painting menu images with old image and with the test imageI test it and is more better than officiële image
* No spring cursor
* Painting osd is very smooth
This new framebuffer is more stable
-
I’m surprised that it hasn’t been reported by other users who use the multiboot feature.
Nobody reports.
Because nobody installs a million images in multiboot like some madman
-
more framebuffer test images only 3 days online
dm820 https://we.tl/t-kcme2SdFgd
dm520 https://we.tl/t-pMKUoGJbx1
dm7080 https://we.tl/t-AtgI3rPyYM
dm900: https://we.tl/t-dTUMjaR5Rz
-
Display More
more framebuffer test images only 3 days online
dm820 https://we.tl/t-kcme2SdFgd
dm520 https://we.tl/t-pMKUoGJbx1
dm7080 https://we.tl/t-AtgI3rPyYM
dm900: https://we.tl/t-dTUMjaR5Rz
No dream two 🫣
-
Nobody reports.
Because nobody installs a million images in multiboot like some madman
Sure, but there are some perverse users (myself included) who use too many images. They should also be served.
After all, a serious project should satisfy all users' tastes.
Don't worry, the developers are happy when bugs are reported to them or there are comments to improve their work.
If they didn’t care, they wouldn’t have fixed the exact same issue that the Multiboot Manager had, and they would have left it with 4 slots and the rest unsorted.
-
Don't worry, the developers are happy when bugs are reported to them or there are comments to improve their work.
Have you tried to help them with buying a coffee?
They spend a lot of time (their free time) to do this Samaritan job
-
Test Image for slow framebuffer issue dm920
only 3 days online
https://we.tl/t-Jk38QpTgZiedit
After completely reboot the device, the image finally booted
first dont use devel feed , this revert the new framebuffer driver
the test image speed up painting osd, check painting menu images with old image and with the test imageI know that. I tried it yesterday without any add-ons, but it didn’t boot the first time until I performed a full reboot of the device. The image is excellent, even better than the official one, honestly.
Thank you very much.
-
-
Have you tried to help them with buying a coffee?
They spend a lot of time (their free time) to do this Samaritan job
I’m not sure what happened today. I didn’t ask for anything excessive; I’m simply pointing out a glitch that I believe can be fixed fairly easily.
I think there’s no point in continuing the discussion, so let’s leave it at that.
-
dreamone osd speedup https://we.tl/t-5e6IhvwVot
dreamtwo osd speedup https://we.tl/t-EiDdUnGNqX -
Captain , with reguards to This post here are logs
With Flash and restore settings and selected plugins (Ask user)
just restores settings and runs myrestore.sh first time it comes up with German language,
I let it run eventually after 3 times comes up allowing me to select English then video settings and eventually lan settings.
After that it reboots and asks if I want to restore settings again and so it goes on,
I need to just cancle then reboot to check for debug.log there is none.
Flash Online with upgrade (Flash & restore all) works without any problems at all.
-
Dreambox Two openatv-7.6.0-dreamtwo-20251203_mmc
-
hi all
as i mentioned before there is something wrong with this firmware opnatv7.6
once i flash the image the box just keeps rebooting all the time
i have used the recovery image for my dm900 but nothing changes even when i try to flash openhdf image it does flash successfully but when the box reboot it reboots with openatv7.6 . the only image that i am stuck with now is pure2 which works fine not much updates with this image.
thanks
OpenATV Team Images Support Forum ~ based on OE-Alliance
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
