OpenATV 7.6 – Discussion & New Features

fsky1 , KiddaC on 7.5.1 check Root/var/volatile/log folder.

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

echo "file dvb_frontend.c -p" > /sys/kernel/debug/dynamic_debug/control

echo "file dvb_frontend.c line 0-99999 -p" > /sys/kernel/debug/dynamic_debug/control

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

Copper_Can

Is it possible to deactivate syslog on the box for preventing permanent r/w without any side effects ?

or is it better outsourcing the log on stick

Regards

logging setting is completely commented out on my box. So its going to always run at default level

pasted-from-clipboard.png

Quote from urie

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

My 7.6 is writing permanently sth when ,for example i'm watching an stream

Regards

Quote from fsky1

Copper_Can

Is it possible to deactivate syslog on the box for preventing permanent r/w without any side effects ?

or is it better outsourcing the log on stick

Regards

Display More

I save crash and debug logs to usb flash drive.

Quote from fsky1

Quote from urie

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

My 7.6 is writing permanently sth when ,for example i'm watching an stream

Regards

Display More

i just checked massages log Feb 22 13:09:57 so it did add entry 7 minutes ago.

Quote from urie

save crash and debug logs to usb flash driv

Do u set it on the sylog conf or in the openatv menue settings

Regards

Quote from fsky1

Quote from urie

save crash and debug logs to usb flash driv

Do u set it on the sylog conf or in the openatv menue settings

Regards

i was only referring to crash and debug logs. I have just read about syslog.config file

Whether this is a thing or not, I don't like things endlessly churning away.
I reduce most of my noise changing LOGLEVEL = 3 in syslog-startup.conf

and commenting out klogd lines in syslog.

Quote from fsky1

Quote from urie

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

My 7.6 is writing permanently sth when ,for example i'm watching an stream

Regards

Display More

i just started watching iptv channel

and two entries added

Feb 22 13:17:00 gbquad4kpro cron.info CROND[4601]: (root) CMD (cd / && run-parts /etc/cron.hourly)
Feb 22 13:17:00 gbquad4kpro cron.info CROND[4600]: (root) CMDEND (cd / && run-parts /etc/cron.hourly)

Quote from KiddaC

Whether this is a thing or not, I don't like things endlessly churning away.
I reduce most of my noise changing LOGLEVEL = 3 in syslog-startup.conf

and commenting out klogd lines in syslog.

may u could add ur procedure to ur openatv 7.* Settings thread

would be great

Regards

Quote from KiddaC

logging setting is completely commented out on my box. So its going to always run at default level

pasted-from-clipboard.png

mines is also commented out on 7.6

Capture.PNG

Quote from urie

mines is also commented out on 7.6

Seems default its also on mine too

Quote from urie

Quote from fsky1

Quote from urie

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

My 7.6 is writing permanently sth when ,for example i'm watching an stream

Regards

Display More

i just started watching iptv channel

and two entries added

Code

Feb 22 13:17:00 gbquad4kpro cron.info CROND[4601]: (root) CMD (cd / && run-parts /etc/cron.hourly)
Feb 22 13:17:00 gbquad4kpro cron.info CROND[4600]: (root) CMDEND (cd / && run-parts /etc/cron.hourly)

Display More

If i run an stream over i2player there coming this messages:

Feb 22 14:28:12 vuuno4k kern.warn kernel: [ 4600.610564] [AUD]: AUDIO_CLEAR_BUFFER 1 0
Feb 22 14:28:15 vuuno4k kern.warn kernel: [ 4603.849447] [VID]: VIDEO_CLEAR_BUFFER 5127  1 1
Feb 22 14:28:15 vuuno4k kern.warn kernel: [ 4603.860554] [AUD]: AUDIO_CLEAR_BUFFER 1 0
Feb 22 14:36:39 vuuno4k kern.warn kernel: [ 5109.519041] [VID]: VIDEO_CLEAR_BUFFER 5127  1 1
Feb 22 14:36:39 vuuno4k kern.warn kernel: [ 5109.530087] [AUD]: AUDIO_CLEAR_BUFFER

According to the web, this could be a normal behaviour on streams

may u can trying to reproduce it

Regards

I think just stop the service should be working:

/etc/init.d/syslog stop

Regards

Quote from fsky1

Quote from urie

Quote from fsky1

Quote from urie

Quote from KiddaC

yes - it grinds away on that folder on openatv 7.5.1
Surely that is an error and it shouldn't be doing that.

Iv'e booted back into 7.6 my messages.0 log file info goes back to feb 18th 256kb that was when I last flashed image 18th feb.

and messages log just to last boot info 26kb.

My 7.6 is writing permanently sth when ,for example i'm watching an stream

Regards

Display More

i just started watching iptv channel

and two entries added

Code

Feb 22 13:17:00 gbquad4kpro cron.info CROND[4601]: (root) CMD (cd / && run-parts /etc/cron.hourly)
Feb 22 13:17:00 gbquad4kpro cron.info CROND[4600]: (root) CMDEND (cd / && run-parts /etc/cron.hourly)

Display More

If i run an stream over i2player there coming this messages:

Code

Feb 22 14:28:12 vuuno4k kern.warn kernel: [ 4600.610564] [AUD]: AUDIO_CLEAR_BUFFER 1 0
Feb 22 14:28:15 vuuno4k kern.warn kernel: [ 4603.849447] [VID]: VIDEO_CLEAR_BUFFER 5127  1 1
Feb 22 14:28:15 vuuno4k kern.warn kernel: [ 4603.860554] [AUD]: AUDIO_CLEAR_BUFFER 1 0
Feb 22 14:36:39 vuuno4k kern.warn kernel: [ 5109.519041] [VID]: VIDEO_CLEAR_BUFFER 5127  1 1
Feb 22 14:36:39 vuuno4k kern.warn kernel: [ 5109.530087] [AUD]: AUDIO_CLEAR_BUFFER

According to the web, this could be a normal behaviour on streams

may u can trying to reproduce it

Regards

Display More

I just ran E2iPlayer played a stream I have nothing logged but I would just forget it we have different devices and could spend forever compairing different things.