Multistream channel tuning on the Gigablue UHD Quad 4k Pro

There are 11 replies in this Thread which was already clicked 2,363 times. The last Post () by zuchnet.

    Guys

    Good morning to all

    I have a problem with this receiver or I do not tune the channels broadcast in multistream mode

    I tried all the images currently around, I also downloaded the plug in TS-sat editor 4.0 ( in case there were problems with the xml satellite file), I uploaded the channel lists from my dreambox DM-920 , but nothing does not tune them to me , has no signal . While for those normally broadcast ( also always from the same satellites of those multistream ) I have absolutely no problems, tune them quietly

    someone kindly can explain the why and suggest evetuali solutions to be able to tune/ see them?

    Thank you very much

    Edited once, last by teto.7 ().

    hello

    Gigablue UHD Quad 4k Pro Tuner Multistream does not support

    That is a shock as i assumed FBC tuners would do multistream. What image are you using? i use openvix 6.6 in a uno4kse and can get miltistream on 5west.


    World of sat has it listed as suitable for multistream.

    Excuse me but they are the same turner that mounts the DM -920 ( I speak of the FBC ) and tune them for years maybe Giglablue must update the drivers ???? a real blow for a machine of the latest generation just out of the way that also update in stiile octagon the tuning of channels in T2-MI.Sorry but I was shocked . think that the multistream of the 5 West already tuned them with a duo two vù ( in his time)

    Quote from teto.7

    Excuse me but they are the same turner that mounts the DM -920 ( I speak of the FBC ) and tune them for years maybe Giglablue must update the drivers ???? a real blow for a machine of the latest generation just out of the way that also update in stiile octagon the tuning of channels in T2-MI.Sorry but I was shocked . think that the multistream of the 5 West already tuned them with a duo two vù ( in his time)

    exactly the same as older gigablue quad uhd 4k (Support for Multi-Stream with optional DVB-S2X tuners.)


    When tuners are eventually available.

    Quote from EnoSat
    Quote from claihew

    That is a shock as i assumed FBC tuners would do multistream. What image are you using? i use openvix 6.6 in a uno4kse and can get miltistream on 5west.


    World of sat has it listed as suitable for multistream.

    You need to distinguish whether you are using 45208 (non-MIS) or 45308 (MIS)

    Tuner info given for pro as DVB-S2X NIM(45308X FBC) (DVB-S2X) also i think there was discussion about gigablue quad uhd 4k newer models came with different tuner and it could multistream.


    https://forums.openpli.org/topic/73096-multistream-on-gigablue-quad-4k/

    Hello

    My UHD Quad 4K pro mounts the satellite turner 45308X ( vome you can see in the attached photo ) that according to what is written in theory should also receive the signals s2-x . and as always shown in the photo the tuner is the one that used the Dreambox in the Dm920 ( that tunes them without any problem both the multistream and the s2x) . As I said in a previous post no image of those currently around makes me tune the channels broadcast in multistream . I hope it’s just a driver problem and that Gigablue will update it as soon as possible. The most serious thing is that from Gigablue everything is silent

    Quote from teto.7

    Hello

    My UHD Quad 4K pro mounts the satellite turner 45308X ( vome you can see in the attached photo ) that according to what is written in theory should also receive the signals s2-x . and as always shown in the photo the tuner is the one that used the Dreambox in the Dm920 ( that tunes them without any problem both the multistream and the s2x) . As I said in a previous post no image of those currently around makes me tune the channels broadcast in multistream . I hope it’s just a driver problem and that Gigablue will update it as soon as possible. The most serious thing is that from Gigablue everything is silent

    It was exactly the same on the Gigablue Quad 4K


    It is certainly DVB-S2X MIS but it is not PLS. I can't give you more technical specifications, because I'm a GP


    Decos con tuner DVB-S2X, multistream+PLS, OK canales Italianos/Frances/Hispasat (no enlaces TDT Abertis Telecom), actualizado 23-2-2020.
    En este primer post, tenemos que separar ideas preconcebidas. Por más que leo, siempre escucho el mismo chiste. Si tiene tuner/sintonizador DVB-S2X tiene que…
    openspa.info


    Then you don't receive French or Italian channels MIS on 5ºW. If I receive Fransat channels on 5ºW


    Until they release the optional tuner for Quad Plus


    È scritto che il Gigablue UHD Quad 4 Pro riceve segnali sia in s2x che in multistream . Poi ripeto che il problema è un driver o un blocco software questo non posso dirti -Tuner opzionale ?

    il sintonizzatore è saldato sulla scheda madre vedo difficile sostituirlo se non si dispone dell'attrezzatura giusta se si dice di metterlo nello slot vuoto poco fattibile in quanto serve ad altri sintonizzatori a meno che non facciano un trio come ha fatto dreambox prima di fare l FBC . Speriamo che risolvano il problema , Ricevitore appena fuori e di fascia alta con questi problemi non ricordare così tanti problemi su una macchina ( se vuoi elencare qualcuno) anche sul leggendario Mediamaster 9500 ( e torniamo indietro di 34 anni )

    L'ho preso un mese e mezzo fa , ma se avessi conosciuto tutti questi problemi non so se l'avrei comprato onestamente parlando

    Edited once, last by teto.7 ().

Gigablue UHD Quad 4K PRO 2xDVB-S2 FBC

Download GiGaBlue QUAD 4K PRO Images and Enigma2 Team Support from OpenATV, OpenBh, OpenPLi, OpenSPA & OpenViX.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login