hi set up cccam with smargo on a ubuntu 10.04 machine no problem and all is well so decided to move on to cccamoscam ie oscam to read the card cccam to share
followed guide and installed no problem but i can not get oscam to recognise my card tried various settings but no luck
here are my configs with a few bits edited for obvious reasons any help in what i have missing appreciated
status log
i have also tried setting smargo as 0403:6001
here is my lsusb output
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
status outputs
Bxxxxxxxx r 1 sly ON OFF 127.0.0.1 0 mouse 09.07.12 16:48:48 00:10:54 0000:0000 no data 00:10:54 UNKNOWN
2012/07/09 16:55:48 xxxxxxxx r ERROR opening device /dev/ttyUSB0 smartreader+
2012/07/09 16:55:48 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+
server config
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5369
[reader]
label = ***
protocol = mouse
device = /dev/ttyUSB0 smartreader+
caid = 0963
boxid = aa bb cc dd
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = xxxxx
httppwd = xxxxx
httpallowed = 192.168.0.1-192.168.0.254
#httprefresh = 3
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;
[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963