Hello, I have a few questions about Dreambox ONE UHD. I would appreciate your help.

There are 74 replies in this Thread which was already clicked 5,629 times. The last Post () by disa51.

    There is no need to open Manage extensions because if you want to install everything you need, you can install it via FTP in Dreambox One. You can install the things you want by pressing the blue button and you have the Blue panel addon and there you have the things you want to install if you need them. I install things via FTP in Dreambox Two and that's it, just like OSCAM. I think you need to connect your Dreambox to the router as you did before without the configurations you want to install. So connect your PC and Dreambox One with a network cable to the router and you get an IP address, that's it. You can install things via FTP in Dreambox One in the tmp folder. Here, read everything here, it says what and how you can install your things.


    https://wiki.ihad.tv/index.php/GP4_Installation_(en)

    Hello my dear friends, I updated my Dreambox One according to some instructions including apt update and apt-get upgrade -y My image is GP4.2 AIO

    Then I manually installed the file gp4-cam-feed-configs Now help me to install the latest version of the emulator Oscam emu online.

    I have put the image of the Addon-Manager section and the image of the Nobody SoftCam section below. Please guide me how to install the latest version of the emulator Oscam emu online.

    In the Nobody Softcam folder, you have to position yourself on the oscsm you want to install, press "OK" to select it, the red circle will appear with the +, then press "Exit" first and then "Red key." After installation, confirm the restart.


    Then in the Nobody CamConf folder, install in the same "gp4-conf-oscam" mode.


    In the /etc/tuxbox/config path you will need to enter your files

    Edited once, last by disa51 ().

    thumbs up 1

    Hello dear friend, as you can see in the image, there is only the file gp4-cam-feed-configs in the folder Nobody Softcam Now, apart from this file, there are no other files in the folder Nobody Softcam What should I do now?

    Another question, from which part of the site can I get the latest version of the binary file of Oscam emu for Dreambox One?

    Hello and thanks for the tips.

    Dear administrators and friends, I have a few questions because I just got the Dreambox One (my installed image is GP4.2 AIO).

    Now, considering that I don't have much knowledge and awareness about it, I have a few questions. Please help me as always.

    1- What are the best settings for having a quality image? My TV is full HD. I have put my current device settings below.

    2- When I use the picture-in-picture feature on the Dreambox One, the sub-image has a very, very small delay and freezes.

    3- When using the motorized dish, there is a lot of delay in moving from one satellite to another. I have put the image of the current settings of the dish on my Dreambox One below. (The dish, etc. are not a problem because with the Dreambox 7020 HD, moving between directions is great with this dish)

    4- What is the best skin where complete information is available? If you know of some examples, please let me test them.

    5-What is the best image for the Dreambox One, other than the one I have on my Dreambox One right now?


    Thank you for your help.

    Dear friends and managers, I would appreciate it if you could answer the rest of my questions below.


    Hello and thanks for the tips.

    Dear administrators and friends, I have a few questions because I just got the Dreambox One (my installed image is GP4.2 AIO).

    Now, considering that I don't have much knowledge and awareness about it, I have a few questions. Please help me as always.

    1- What are the best settings for having a quality image? My TV is full HD. I have put my current device settings below.

    2- When I use the picture-in-picture feature on the Dreambox One, the sub-image has a very, very small delay and freezes.

    3- When using the motorized dish, there is a lot of delay in moving from one satellite to another. I have put the image of the current settings of the dish on my Dreambox One below. (The dish, etc. are not a problem because with the Dreambox 7020 HD, moving between directions is great with this dish)

    4- What is the best skin where complete information is available? If you know of some examples, please let me test them.

    5-What is the best image for the Dreambox One, other than the one I have on my Dreambox One right now?


    Thank you for your help.




    I don't think you know how to take a screenshot to show your Dreambox screens clearly. You'll need to type your decoder's IP address into the address bar of your PC's browser. The "dreambox webcontrol" page will appear, where you'll need to click on "Box control." Then, on the right side, click "screenshot (all)," and you'll see the image you currently have on your TV, transmitted by the decoder. Then, right-click on the image and select "save image as." This image, which by default is named "screenshot," which you can change, will be saved to your PC in the location you choose.


    I'll try to answer some of your questions.


    - In my opinion, you already have the best image you can get, namely the GP4.2 AIO, but others might disagree.


    - In Addon Manager, you'll find the Gemini skins folder, where you'll find the Gemini-specific skins. I installed the Shadow WQHD and Zombi Shadow FHD skins. These skins are highly customizable after installing the "Styles" plugin from the Skin Components folder via Addon Manager. If your TV supports it, set the resolution to 2160p; otherwise, set it to 1080p.


    - For the PIP, the window size is adjustable. After activating it, from the same activation menu, pressing the green button opens a banner that shows you how to enlarge or reduce the size and also how to move the PIP to a different position. I don't know which version of the Dreamone you have, whether it's the Twinsat or a combo. If you have Twinsat, to be able to open a PIP window at any time and for any channel visible with your system, you should have both satellite inputs connected to the same two satellite inputs. Otherwise, you'll only be able to see one other channel visible on the same frequency/transponder in a PIP window. If you have the "Combo", then you can always open a channel visible through the input you are not using. I can't tell you how to configure your system, having a simple system, with two connected descents.

    Edited once, last by disa51 ().

    thumbs up 1

    Hello and thanks for your advice

    I took quality pictures as you said and put them below.

    Then as I told you, when I use the picture-in-picture feature, there is a very, very small delay and freeze. Do you dear ones also have this problem? I completely understand all the things you said about the picture-in-picture, but this very, very small delay and freeze is annoying.

    Hello dear friends and administrators, sorry, I have encountered a problem in the continuation of the above question.

    I installed the emulator Oscam emu 11943 online. I have included all the relevant images below. But no matter what I did, I could not open the card channels and the channels that are locked with the code Biss.

    I have a request from you, considering the files in the folder Config and the images that I have placed below, please help me as always, what changes should I make in the files I placed so that the card channels can be opened. I am waiting for your answer.

    Thank you.

    Hello dear friends and administrators, now I am looking for the GP4.2 AIO image. Is there any other image that can be installed on the Dreambox One flash without any problems? For example, the OpenPLi 9.1 image or other images. It should also have the picture-in-picture feature. Because the truth is that in the GP4.2 AIO image, there is a freeze and delay in the sub-image during picture-in-picture. Then, it is slow and sometimes not accurate when using the rotating dish. Thank you again, as always, for your help.

    Quote from 1z1z

    Hello dear friends and administrators, now I am looking for the GP4.2 AIO image. Is there any other image that can be installed on the Dreambox One flash without any problems? For example, the OpenPLi 9.1 image or other images. It should also have the picture-in-picture feature. Because the truth is that in the GP4.2 AIO image, there is a freeze and delay in the sub-image during picture-in-picture. Then, it is slow and sometimes not accurate when using the rotating dish. Thank you again, as always, for your help.

    You have here OpenPLi 9.x for DreamOne and DreamTwo,


    OpenPLi 9xStar IPTV - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim3


    and OpenPLi 8.x here, http://openpli8xstar.japhar.net/


    TS

    To my knowledge, the only image with native and functioning PIP is the AIO image.


    It can be activated from the Extensions menu, or from the list on the channel that interests to open, Menu --> Blue button.

    Edited once, last by disa51 ().

Dreambox One 4K UHD 2160p H.265 Enigma2 Linux Android Dual Wifi DVB-S2X MIS Satellite Receiver.

Download DreamOne Dreambox One 4K UHD Android CoreELEC, DreamOS Firmware and Enigma2 Images. Team Support from DemoniSat - Dream-Elite - Gemini Project GP4 - Merlin Project - NewNigma2 - Peter Pan Neverland - OpenBh - OpenPLi Japhar - OpenATV - OpenVision - PurE2 - SatLodge.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login