Help with oscam emu for PC with Windows 7

There are 83 replies in this Thread which was already clicked 4,394 times. The last Post () by fiji1.

    Quote from fiji1
    Quote from geraldo

    I managed to get autoroll working with Oscam emu Cygwin, and also audio; video not yet, but I'll keep trying. Before, I didn't even have audio. I'm using dvbviewer. I tried to send a video but it gave an error.

    send me config file .

    Good evening, I didn't send you the settings because they're the same as before, when I had neither audio nor video. I only got audio on dvbviewer with mdvbapi v0.19.1. Today, with the help of an AI, I got video as well, but then there's no audio. My dvbviewer is a promo version; it works for an hour and then closes, and I think it's not a complete version, but it's working. I set extended_cw_api = 2 in oscam conf, and cacheex=1 in oscam server, and then there's video but no audio. And if I change extended_cw_api = 1, it goes back to audio but no video. It's cacheex=0.

    Okay, for me, if I disable stream relay, the error you posted appears; enabling it works normally. It's in oscam, in oscam config on my computer. And that's all I can tell you.

    Regarding that, I can't help you, and I don't understand anything about compilation. I only use oscam emu cygwin with a Windows 7 executable. And then I do the necessary configuration: oscam config, oscam server, and oscam user.🙌

    Hi Fiji 1, which player do you use and what DVB interface do you have? And does the Oscam emulator Cygwin with Windows that you use do autoroll on any channel in PowerVu? As I wrote to you, only DVBViewer worked; I got audio with the Oscam version I posted on the forum, and also autoroll. The newer versions don't run on the Windows 7 I'm using.

    Yes, I've already tried with SmartDVB and DVD Dream, but the only one that worked with sound and video was DVB Viewer Pro (Demo). However, it works with audio but no video, and with video but no audio. I tried with other Oscam emulators like Cygwin, but I didn't get results with the same configuration. It only works with the version shown in the video. And it also does autoroll in PowerVu on VTV, Uruguay.

    I'll try it, but I'll have to research the dvbapinet configuration. I've never used it, I've never configured it. I'll try it, but I'll have to research the dvbapinet configuration. I've never used it, never configured it. Do you use dvbapinet?

    Oleyyyy


    I finally managed to install Windows OScam libdvbcsa Stream Relay.


    +-------------------------------------------------------------------------------

    | OSCam Ver.: 2.26.06-11965-802 sha: dd703725 target: x86_64-pc-cygwin-libusb-libdvbcsa

    | Build Date: 11.06.2026 20:30:21

    | Tools:

    | CROSS =

    | CC = gcc

    | STRIP = strip

    | Settings:

    | CONF_DIR = /etc/tuxbox/config

    | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-schedule-insns

    | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition

    | CFLAGS = -DSTATIC_LIBDVBCSA=0 -mmmx -msse -msse2 -msse3 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_LIBDVBCSA=1

    | LDFLAGS = -Wl,--gc-sections -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_LIBDVBCSA=1

    | LIBS = -lcrypto -lusb-1.0 -ldvbcsa -lpthread -ldl

    | UseFlags = USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_LIBDVBCSA=1

    | Config:

    | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_COMPRESS_WEBIF HAVE_DVBAPI WITH_EXTENDED_CW READ_SDT_CHARSETS CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM

    | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX CONSTCW STREAMRELAY

    | Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT

    | CardRdrs : PHOENIX INTERNAL SMART

    | Compiler : gcc (GCC) 16.0.1 20260412 (experimental)

    | Config : build/x86_64-pc-cygwin-libusb-libdvbcsa/config.mak

    | Binary : Distribution/oscam-2.26.06-11965-802@dd703725-x86_64-pc-cygwin.exe-libusb-libdvbcsa

    +-------------------------------------------------------------------------------

    HOSTCC webif/pages_gen

    GEN webif/pages.c

    GEN Compressed 497880 template bytes into 185492 bytes. 312388 saved bytes (62.74%).

    CC cscrypt/des.c

    CC cscrypt/i_cbc.c

    CC cscrypt/i_ecb.c

    CC cscrypt/i_skey.c

    CC cscrypt/md5.c

    CC cscrypt/rc6.c

    CC cscrypt/mdc2.c

    CC cscrypt/fast_aes.c

    CC cscrypt/sha256.c

    CC csctapi/atr.c

    CC csctapi/icc_async.c

    CC csctapi/io_serial.c

    CC csctapi/protocol_t0.c

    CC csctapi/protocol_t1.c

    CC csctapi/ifd_phoenix.c

    CC csctapi/ifd_sci.c

    CC csctapi/ifd_smartreader.c

    CC minilzo/minilzo.c

    CC module-anticasc.c

    CC module-cacheex.c

    CC module-camd35-cacheex.c

    CC module-camd35.c

    CC module-cccam-cacheex.c

    CC module-cccam.c

    CC module-cccshare.c

    CC module-constcw.c

    CC module-emulator.c

    CC module-emulator-osemu.c

    CC module-emulator-biss.c

    CC module-emulator-cryptoworks.c

    CC module-emulator-director.c

    CC module-emulator-irdeto.c

    CC module-emulator-nagravision.c

    CC module-emulator-omnicrypt.c

    CC module-emulator-powervu.c

    CC module-emulator-viaccess.c

    CC module-csp.c

    CC module-cw-cycle-check.c

    CC module-dvbapi-chancache.c

    CC module-dvbapi.c

    CC module-gbox-helper.c

    CC module-gbox-sms.c

    CC module-gbox-remm.c

    CC module-gbox-cards.c

    CC module-gbox.c

    CC module-monitor.c

    CC module-newcamd.c

    CC module-newcamd-des.c

    CC module-streamrelay.c

    CC module-stat.c

    CC module-webif-lib.c

    CC module-webif-tpl.c

    CC module-webif.c

    CC webif/pages.c

    CC reader-common.c

    CC reader-bulcrypt.c

    CC reader-conax.c

    CC reader-cryptoworks.c

    CC reader-dgcrypt.c

    CC reader-dre.c

    CC reader-dre-cas.c

    CC reader-dre-common.c

    CC reader-dre-st20.c

    CC reader-griffin.c

    CC reader-irdeto.c

    CC reader-nagra-common.c

    CC reader-nagra.c

    CC reader-nagracak7.c

    CC reader-seca.c

    CC reader-tongfang.c

    CC reader-viaccess.c

    CC reader-videoguard-common.c

    CC reader-videoguard1.c

    CC reader-videoguard12.c

    CC reader-videoguard2.c

    CC oscam-aes.c

    CC oscam-array.c

    CC oscam-hashtable.c

    CC oscam-cache.c

    CC oscam-chk.c

    CC oscam-client.c

    CC oscam-conf.c

    CC oscam-conf-chk.c

    CC oscam-conf-mk.c

    CC oscam-config-account.c

    CC oscam-config-global.c

    CC oscam-config-reader.c

    CC oscam-config.c

    oscam-config.c: 'read_cccamcfg' işlevinde:

    oscam-config.c:1579:33: warning: 'caid' bildirimi bir global bildirimi gölgeliyor [-Wshadow]

    1579 | int32_t caid = 0, prid = 0;

    | ^~~~

    oscam-config.c:26:10: note: shadowed declaration is here

    26 | uint32_t caid;

    | ^~~~

    CC oscam-ecm.c

    CC oscam-emm.c

    CC oscam-emm-cache.c

    CC oscam-failban.c

    CC oscam-files.c

    CC oscam-garbage.c

    CC oscam-lock.c

    CC oscam-log.c

    CC oscam-log-reader.c

    CC oscam-net.c

    CC oscam-llist.c

    CC oscam-reader.c

    CC oscam-simples.c

    CC oscam-string.c

    CC oscam-time.c

    CC oscam-work.c

    CC oscam.c

    CONF build/x86_64-pc-cygwin-libusb-libdvbcsa/config.c

    LINK Distribution/oscam-2.26.06-11965-802@dd703725-x86_64-pc-cygwin.exe-libusb-libdvbcsa.debug

    STRIP Distribution/oscam-2.26.06-11965-802@dd703725-x86_64-pc-cygwin.exe-libusb-libdvbcsa

    BUILD Distribution/list_smargo-2.26.06-11965-802@dd703725-x86_64-pc-cygwin.exe-libusb-libdvbcsa

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login