I don't know how this is working so i am trying to find out the same from the net
Linux server
- annie12
- Thread is marked as Resolved.
-
-
I don't know how this is working so i am trying to find out the same from the net
Well for starters you need to post an introduction thread, secondly you will need to give us a bit more to go off, if you want an answer that may be of benefit to you.
-
Quote
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 10
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255I had issues with this oscam.conf in regards to the httpallowed.
I ended up having to split the httpallowed I.P address's into ranges to sort out the oscam webif
try this in your oscam.conf to get your webif going..Code[webif] httpport = 8888 httpuser = httppwd = httprefresh = 10 httphideidleclients = 0 httpallowed = [COLOR='#FFFF00']127.0.0.1 , 192.168.0.0-192.168.0.255 , 192.168.1.1-192.168.1.255 , 192.168.2.0-192.168.255.255[/COLOR] debug = 255
I remember you saying that you were using the GUI version of Ubunty.
127.0.0.1 allows local host (login to webif from browser on your Ubuntu system)For standard routers i.e. (192.168.0.1 & 192.168.1.1)
192.168.0.0-192.168.0.255 , 192.168.1.1-192.168.1.255 allows remote PC (login to oscam webif from browser on remote computer on your internal network)All other I.P Adress's on your internal Network
192.168.2.0-192.168.255.255 allows remote PC (login to oscam webif from browser on remote computer on all other IP's on your internal network)If that does not work, the only other thing that I think it could be is that you are using a version of oscam that is not compiled for your setup.
Use this great tool to get the correct version of oscam for your setup..
http://linuxsat-support.com/os…ollection-gianni8127.html
from what I've read about your setup the version your looking fo is: (oscam-svn7188-i686-pc-linux-webif-ssl-pcsc-libusb-1.0.9-Distribution) within the file produced by the above tool.Also, make sure you stop/start oscam to see if the changes you are making are working, sometimes, Id even recommend a reboot (especially if the PC is just getting setup & your not depending on it)
& to upgrade your version of oscam, use step by step guide in post 3 of this thread using your preferred version of oscam..
http://linuxsat-support.com/li…ntu-server.html#post52984Good luck & well done for getting this far.. Your 99% of the way there!
-
Thanks to every one who helped me with this setup i felt very confident so then rather than have a tower pc fan/psu noise i decided
to try out something new, had a laptop hp-dv2500 (ya the 1 that give gpu trouble and it did) installed ubuntu/configured true cheating
the omnikey to go went first time so now using the dual core-2gb as a server ..1 last thing to try later thatfellows tut,trying
to get the onboard wireless going, which i dont think will work. by looking at this post i dont think so itss all gibeer-ish to me
(802.11 Linux STA driver | Broadcom ) but a samll fan under lappy to keep it cool and the psu ect.
so to one and all lads cheers (I WONDER WILL I EVER GET FINISHED) ..LOL -
Quote
1 last thing to try later thatfellows tut
Yeah, go for it.. oscam cccam webif's working straight out of the box...
Quotetrying to get the onboard wireless going, which i dont think will work. by looking at this post i dont think so itss all gibeer-ish to me
(802.11 Linux STA driver | Broadcom ) but a samll fan under lappy to keep it cool and the psu ect.
so to one and all lads cheers (I WONDER WILL I EVER GET FINISHED) ..LOLI would not go down the wireless route if I could help it annie12, try and have a wired connection to the router.. If you want a cheep decent setup, get yourself an old dell optiplex or similar for between €40-€60 on adverts.ie and set it up right beside your router.. Laptops are notorious for overheating and when they do, the BOIS will power them off.. If you want this running 24/7 get a cheep desktop like above.. I paid €60 for my server, it runs 24/7 wired to the router and its like a fridge..
-
thanks thatfellow but the lapp yi am using was only fit for scrap as the gpu..wont work on windows anyway i have it connected
to router direct LOL -
Just an update lads my oscam http/addy/:8888 just decided to work with out any intervention..never knew the wireless was there all the time as ubuntu is new to me..just now awaiting to see if it will update it always did on the vu/dm
that master.g helped with (ta) once again thanks to all that helped.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!