iv installed it everything went fine untill i goto the remote login it refuses to let me login as root from a terminal usinf winscp as root even though password is right comes up with invalid password iv tried everything works from the ermincal its self
Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install
-
- Article
- thatfellow
- Thread is marked as Resolved.
-
-
iv installed it everything went fine untill i goto the remote login it refuses to let me login as root from a terminal usinf winscp as root even though password is right comes up with invalid password iv tried everything works from the ermincal its self
-
Hello guys, i try install this scrypt, and i think i have done it ok, but in the end i got a bunch of " is missing "dpkg-query: no packages found matching libc6-dev
libc6-dev ... is missing "its normal ??
im using ubunto 13.04 server 64 bits.
tks in advance.
here the link http://pastebin.com/Gky4nkRh for the installation log
-
ThatFellow and MasterG i applaud the level of support you provide for this autoscript. best i have seen on any forum
I have a few questions before running it on my new clean built Ubuntu 14.04 x64 desktop build. I currently run a 10.04 x86 cccam server (using origional youknowho script) with smargo and this has run faultless for 3 years but like i said i am upgrading to new hardware, also have an unused omnikey reader hence these questions:
1) please excuse my ignorance, why oscam/cccam server strategy over just cccam later versions without oscam? (is it for faster ecm & opening channels like boxnation?)
2) putting cccam.cfg clines/fline aside, does your finished installscript work "out of the box" for 0963 uk card? or is additional oscam config required
3) i understand why u need to use cccam 2.1.3 for Nline256 local trick in oscam, but surely this means a dodgy cline can reshare/steal your local, is that right?
4) i am presuming omnikey reader support is built in, but how can i test if the reader is operational when plugged in but without a card inserted.
5) as an alternative to omnikey, does oscam support smargo, ( i have read elsewhere) is doesnt?sorry for the questions but it will fill in all my gaps before proceeding. great work guys.
-
hi, why i get this foult when i want install oscam
root@*************:~# chmod 755 /tmp/CCcamOscamInstall.sh
root@*************:~# /tmp/CCcamOscamInstall.sh
-bash: /tmp/CCcamOscamInstall.sh: /bin/sh^M: bad interpreter: No such file or directory -
if you do chmod +x /tmp/CCcamOscamInstall.sh
then sh or ./tmp/CCcamOscamInstall.shthis how i do it you must most time use ./commander by a *.sh i use most time sh ./*.sh
example sh ./CCcamOscamInstall.shsh = sh --help
GNU bash, versie 4.3.11(1)-release-(x86_64-pc-linux-gnu)if you use ./ works too :)
-
where can I find the version 12 or 13?
-
where can I find the version 12 or 13?
The script will work on all versions.. Get ubuntu here => Ubuntu Releases
-
Hi Friends
I've posted the full CCcamOscam
* When you want the server IP and port 8888 or 16001 can not connect to server
On the whole, I disabled the firewall with the following command
sudo ufw disable
I still can not connect to the server using portPlease give me tips
Thanks -
Hi Friends
I've posted the full CCcamOscam
* When you want the server IP and port 8888 or 16001 can not connect to server
On the whole, I disabled the firewall with the following command
sudo ufw disable
I still can not connect to the server using portPlease give me tips
ThanksDid you try restarting oscam and CCcam in telnet ? Use the following commands, pressing enter after each line..
-
i install it on ubuntu 14.04 server x64, have some problems with script (i install it manual and all OK) :13_002:
Reader infinity USB phoenix (install drivers x64 from https://launchpad.net/~pmcener…ubuntu/ppa/+build/2057141)THANKS
And a question ..i think just for the question....
Is it possible to read (with display) N**A GR card? -
hi guys
i have installed the OSCAM/CCcam auto script successfully (big thanks to thatfellow) to my Ubuntu 14.04 x64 server. I have the CCcam config all sorted but having some issues with getting my OmniKey AG CardMan 3121 reader to read my slycard in OSCAM.
In WebIF/scanUSB i see the reader listed as:
Bus 004 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
iProduct 2 Smart Card Reader USB
iSerial 0I am using this config in OSCAM.server:
[reader]
label = ***uk
protocol = pcsc
device = 0
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1not sure why but i am getting these errors in the log output:
2014/10/08 09:45:56 21C62A0 r ***uk [pcsc] IFD: Opening device 0
2014/10/08 09:45:56 21C62A0 r ***uk [pcsc] IO: PCSC establish context for PCSC pcsc_reader 0
2014/10/08 09:45:56 21C62A0 r ***uk [pcsc] PCSC failed establish context (8010001d)
2014/10/08 09:45:56 21C62A0 r ***uk [pcsc] IFD: ERROR: Can't open 0 device
2014/10/08 09:45:56 21C62A0 r ***uk [pcsc] Cannot open device: 0
2014/10/08 09:45:57 0 --- Skipped 1 duplicated log lines ---any advice would be great.
-
resolved my omnikey reader issue by running: apt-get install opensc
not sure why i needed to as i am sure this got installed with the auto script.
all good and installation on a 14.04 X64 desktop Ubuntu is working great. -
I tried installing this on ubuntu server 14.04.1. During middle of installation I get a bunch of single "y"''s Running down the page and that's it. Did anyone get this, is this normal during installation?
Thanks
-
I tried installing this on ubuntu server 14.04.1. During middle of installation I get a bunch of single "y"''s Running down the page and that's it. Did anyone get this, is this normal during installation?
Thanks
Open the script with a editor, and install it manual, from line 149 (apt-get update).......(copy - paste commands from script to terminal}
Everthing before this line have been installed when you ran the script
I had exactly the same problem -
Open the script with a editor, and install it manual, from line 149 (apt-get update).......(copy - paste commands from script to terminal}
Everthing before this line have been installed when you ran the script
I had exactly the same problemThanks, that did it.
-
wow its nice for guideness
-
Really easy script to install thanks. Could anybody please tell me if there is an automatic update or a restart as mine keeps on rebooting/ updating every morning at 6.38am I wouldn't mind that if it didn't log me in multiple time once it restarted. If there vis could someone please tell me how to switch it off.
-
It's a cron job as part of the script.
Have a look here about editing it (post #20):
http://linuxsat-support.com/showthread.php?t=16479&page=2
To understand how it works is explained here:
http://linuxsat-support.com/showthread.php?t=14263 -
The problem is I don't have the crontab in etc/crontab. I have cron daily/ cron weekly in etc. So I can't even edit it because it's not there.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!