I have been helping a friend put a newer image on his box. He had Nemesis 2.2 release 4.2.0, 07.07.2008 i think on box.
So i was using teamviewer and used dcc to update the image to Nemsis_4.4_CCcam_2.3.0_by Midar_sat all looked fine erased flash and written image on dm500.
But when he went to turn on it was bricked in a way. So i know he needs a null modem cable and i can do it via dream up but the question is what image should i use that has cccam built in?
Dm500 problems
- djrikstar333
- Thread is marked as Resolved.
There are 4 replies in this Thread which was already clicked 771 times. The last Post () by djrikstar333.
-
If you have FTP access to the dm500 you could try flashing via telnet.
To flash an image using Telnet
This method will only work with a .img image file.
. Rename the image file to backup.img
. FTP the image file to the /tmp folder on the dreambox
. Telnet to your box and paste the following command:Codecd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && rebootThis is one of the best images Commando 14.6 DM500 Release, it doesnt have CCcam pre-installed, but follow the guide in this thread HERE - Commando Neutrino 14.4 for DM500s.
A few more recommended images that have cams pre-installed, Gemini 4.70 Freestyle Skin UK Ready Backup By Ten Below and SifTeam 1.9.4C Oscam6574/CCcam2.1.3 Backup By Ten Below.
-
flashing dm 500n with dcc hmmm not good idea!yes with dreamUP.You can look on dm500 image forums for images and buckup images and you will find one.for exmpo DM500 OpenPLi-Turko v20 Metalic HD Backup...
-
master G
Moved the thread from forum DM500 - DM500s Support to forum Enigma1 Support.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
