I have been helping a friend put a newer image on his box. He had Nemesis 2.2 release 4.2.0, 07.07.2008 i think on box.
So i was using teamviewer and used dcc to update the image to Nemsis_4.4_CCcam_2.3.0_by Midar_sat all looked fine erased flash and written image on dm500.
But when he went to turn on it was bricked in a way. So i know he needs a null modem cable and i can do it via dream up but the question is what image should i use that has cccam built in?
Dm500 problems
- djrikstar333
- Thread is marked as Resolved.
There are 4 replies in this Thread which was already clicked 1,175 times. The last Post () by djrikstar333.
-
If you have FTP access to the dm500 you could try flashing via telnet.
To flash an image using Telnet
This method will only work with a .img image file.
. Rename the image file to backup.img
. FTP the image file to the /tmp folder on the dreambox
. Telnet to your box and paste the following command:Codecd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && rebootThis is one of the best images Commando 14.6 DM500 Release, it doesnt have CCcam pre-installed, but follow the guide in this thread HERE - Commando Neutrino 14.4 for DM500s.
A few more recommended images that have cams pre-installed, Gemini 4.70 Freestyle Skin UK Ready Backup By Ten Below and SifTeam 1.9.4C Oscam6574/CCcam2.1.3 Backup By Ten Below.
-
flashing dm 500n with dcc hmmm not good idea!yes with dreamUP.You can look on dm500 image forums for images and buckup images and you will find one.for exmpo DM500 OpenPLi-Turko v20 Metalic HD Backup...
-
master G
Moved the thread from forum DM500 - DM500s Support to forum Enigma1 Support.
Your dedicated resource for Enigma1 Dreambox support.
Access downloads and troubleshooting for the DM500, DM600, and DM7020 legacy models. Support and downloads for classic Dreamboxes. Keep your DM500, DM600, or DM7020 running with Enigma1 software and community help.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
