You'll have to change the device on the second reader from 0 to 1 otherwise your server will think there is only one reader device attached.
If you were to add a third reader to your setup, that device would then be 2 and so on.
The label will distinguish them in your webif and if you decide to add a services file, having a different label makes it easier to identify which packages are on which cards.
Eg label on first reader could be slyuk,
label on second could be set4nta/ uk2 or whatever you want.
Good practice to at least restart oscam for changes to take effect or restart server.
Tutorial - Ubuntu Server x32/x64 - Automated Oscam only Install Package
-
- Article
- thatfellow
- Thread is marked as Resolved.
-
-
I have everything installed and all ok, but not add my ccamm line to oscam.
How do I do it? regards
-
Download this handy tool:
http://linuxsat-support.com/attachment.php?attachmentid=10388&d=1344884910Paste in your line details into the top window.
Make sure "c line" is selected and also "oscam.server"Hit "convert to oscam"
Copy all that appears in bottom window and paste into your oscam.server config on your server underneath your other reader configs -
You'll have to change the device on the second reader from 0 to 1 otherwise your server will think there is only one reader device attached.
If you were to add a third reader to your setup, that device would then be 2 and so on.
The label will distinguish them in your webif and if you decide to add a services file, having a different label makes it easier to identify which packages are on which cards.
Eg label on first reader could be slyuk,
label on second could be set4nta/ uk2 or whatever you want.
Good practice to at least restart oscam for changes to take effect or restart server.Just to give you a feed back regarding the above; i tried it and can only read one card the second card has no entitlement.
here is my final oscam.server config. please check if everything look ok[reader]
label = slyuk
protocol = pcsc
device = 0
enable = 1
detect = cd
mhz = 357
cardmhz = 357
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 1[reader]
label = uk2
protocol = pcsc
device = 1
enable = 1
detect = cd
mhz = 357
cardmhz = 357
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 1 -
Just to give you a feed back regarding the above; i tried it and can only read one card the second card has no entitlement.
here is my final oscam.server config. please check if everything look ok
Both cards are using the same group (1). They need their own separate group, so change the second [reader] to group 2. Then add group 1,2 to the [account] in oscam.user. -
Both cards are using the same group (1). They need their own separate group, so change the second [reader] to group 2. Then add group 1,2 to the [account] in oscam.user.
do you mean in my oscam user something like this because am a bit confused and i change put 2 in the second reader now still cant get the second card to work
[account]
user = xx
pwd = xxx
caid = 0963
au = ***uk
group = 1,2 -
Configs would be like this:
Oscam.serverCode
Display More[reader] label = [COLOR='#FF0000']uk1[/COLOR] protocol = pcsc device = 0 enable = 1 detect = cd blockemm-u = 0 blockemm-s = 0 blockemm-g = 1 blockemm-unknown = 1 caid = 0963 ident = 0963:000000 group = 1 emmcache = 1,3,2 ecmcache = 1 lb_weight = 101 dropbadcws = 1 [reader] label = [COLOR='#FF0000']uk2[/COLOR] protocol = pcsc device = 1 enable = 1 detect = cd blockemm-u = 0 blockemm-s = 0 blockemm-g = 1 blockemm-unknown = 1 caid = 0963 ident = 0963:000000 group = [COLOR='#FF0000']2[/COLOR] emmcache = 1,3,2 ecmcache = 1 lb_weight = 101 dropbadcws = 1
Oscam.user
Code
Display More[account] user = xx pwd = xxx caid = 0963 au = [COLOR='#FF0000']uk1[/COLOR] group = 1 [account] user = xx2 pwd = xxx2 caid = 0963 au = [COLOR='#FF0000']uk2[/COLOR] group = [COLOR='#FF0000']2[/COLOR]
Show us an oscam log from startup. There will be errors there that will help solve this.
-
Configs would be like this:
Oscam.serverCode
Display More[reader] label = [COLOR='#FF0000']uk1[/COLOR] protocol = pcsc device = 0 enable = 1 detect = cd blockemm-u = 0 blockemm-s = 0 blockemm-g = 1 blockemm-unknown = 1 caid = 0963 ident = 0963:000000 group = 1 emmcache = 1,3,2 ecmcache = 1 lb_weight = 101 dropbadcws = 1 [reader] label = [COLOR='#FF0000']uk2[/COLOR] protocol = pcsc device = 1 enable = 1 detect = cd blockemm-u = 0 blockemm-s = 0 blockemm-g = 1 blockemm-unknown = 1 caid = 0963 ident = 0963:000000 group = [COLOR='#FF0000']2[/COLOR] emmcache = 1,3,2 ecmcache = 1 lb_weight = 101 dropbadcws = 1
Oscam.user
Code
Display More[account] user = xx pwd = xxx caid = 0963 au = [COLOR='#FF0000']uk1[/COLOR] group = 1 [account] user = xx2 pwd = xxx2 caid = 0963 au = [COLOR='#FF0000']uk2[/COLOR] group = [COLOR='#FF0000']2[/COLOR]
Show us an oscam log from startup. There will be errors there that will help solve this.
where can i find this oscam log from startup from? sorry if this a n..b question
-
where can i find this oscam log from startup from? sorry if this a n..b question
IThe webinterface can be found in a browser window type http://ip.address.of.server:8888
Change port 8888 to whatever you have set [webif] in oscam.conf
Restart oscam then copy the log at start up.
-
IThe webinterface can be found in a browser window type http://ip.address.of.server:8888
Change port 8888 to whatever you have set [webif] in oscam.conf
Restart oscam then copy the log at start up.
here is the log
015/03/08 15:37:40 89C7AC0 r uk1 [pcsc] card detected
2015/03/08 15:37:40 89C7AC0 r uk1 [pcsc] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2015/03/08 15:37:41 89C7AC0 r uk1 [pcsc] Card type: SYBV
2015/03/08 15:37:41 89C7AC0 r uk1 [pcsc] Rom version: 40LF
2015/03/08 15:37:42 89C7AC0 r uk1 [pcsc] parental lock setting: 3F 00 0E 00
2015/03/08 15:37:42 89C7AC0 r uk1 [pcsc] type: ********** B***B (0963), caid: 0963
2015/03/08 15:37:42 89C7AC0 r uk1 [pcsc] serial: ########, BoxID: ########, baseyear: 1997
2015/03/08 15:37:42 89C7AC0 r uk1 [pcsc] ready for requests
2015/03/08 15:37:42 89C7AC0 r uk1 [pcsc] found card system ***********
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] card detected
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] type: ********** B***B (0963)
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 6feb, expiry date: xx/xx/05-00:01:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0003, expiry date: xx/xx/05-00:01:00 -01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 000b, expiry date: -xx/xx/05-00:01:00 01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0010, expiry date: 2015/xx/xx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 001d, expiry date: 2015/xx/xx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0040, expiry date: 2015/xx/xx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0041, expiry date: 2015/xx/xx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0047, expiry date: 2015/-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0073, expiry date: 2015-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 0079, expiry date: 2015-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 30e1, expiry date: 2015/-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 30e2, expiry date: 2015/-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 30e3, expiry date: 2015/-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 30e4, expiry date: 2015-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: 30e5, expiry date: 2015/04/17-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b732, expiry date: 2015-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b736, expiry date: 2015-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b73b, expiry date: 2015/0:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b765, expiry date: 2015/:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b766, expiry date: 2015/:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b772, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b773, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b846, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b854, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b860, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b8d2, expiry date: 201-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b92c, expiry date: xxxxx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b93f, expiry date: xxxx-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b9fb, expiry date: 20-01:00:00
2015/03/08 15:37:42 89C7AC0 r uk1 [***********] tier: b9fc, expiry date: xxxx-01:00:00
2015/03/08 15:38:40 89C97B0 r uk2 [pcsc] Wrong pcsc_reader index: 1
2015/03/08 15:38:40 89C97B0 r uk2 [pcsc] Cannot open device: 1- - - Updated - - -
I think the problem the second card is
2015/03/08 15:38:40 89C97B0 r uk2 [pcsc] Wrong pcsc_reader index: 1
2015/03/08 15:38:40 89C97B0 r uk2 [pcsc] Cannot open device: 1any way to sort out the problem of Wrong pcsc_reader index: 1 ?
-
any way to sort out the problem of Wrong pcsc_reader index: 1 ?
Change the device = 1 to 2 or 3, 4 until you get the correct port. Or keep device = 1 and move the omnikey to a different usb port on the server until it works.
-
Change the device = 1 to 2 or 3, 4 until you get the correct port. Or keep device = 1 and move the omnikey to a different usb port on the server until it works.
Thanks mr G. I will give this a try and let u know.
-
Change the device = 1 to 2 or 3, 4 until you get the correct port. Or keep device = 1 and move the omnikey to a different usb port on the server until it works.
Hi Master G. just want to let you guys know that the two card are now working with on the oscam but I cant get to watch anything on my duo2 ; on the oscam its shows offline. here is my final config
oscam config
global]
logfile = /var/oscamlog/oscam.log
nice = -1
maxlogsize = 19999
preferlocalcards = 1
emmlogdir = /var/oscamlog/[webif]
httpport = xxxx
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httprefresh = 15[cccam]
port = xxxx
reshare = 2
[reader]
label = uk1
protocol = pcsc
device = 0
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 10scam server ( now ok)
[reader]
label = uk1
protocol = pcsc
device = 1
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 1[reader]
label = uk2
protocol = pcsc
device = 1
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws =Oscam users
[account]
user = mmtte
pwd = umty
caid = 0963
au = uk1
group = 1[account]
user = llky
pwd = tyuwk
caid = 0963
au = uk2
group = 2Dont know what i have done incorrect needs help
- - - Updated - - -
I have tried three hours of everything but cant connect to pair . I have to go and rest now and wait for response from the forum.
-
On your PC server:
Quote
oscam configglobal]
logfile = /var/oscamlog/oscam.log
nice = -1
maxlogsize = 19999
preferlocalcards = 1
emmlogdir = /var/oscamlog/[webif]
httpport = xxxx
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httprefresh = 15[cccam]
port = xxxx
reshare = 2
[reader]
label = uk1
protocol = pcsc
device = 0
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 10scam server ( now ok)
[reader]
label = uk1
protocol = pcsc
device = 1
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws = 1[reader]
label = uk2
protocol = pcsc
device = 1
enable = 1
detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
caid = 0963
ident = 0963:000000
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 101
dropbadcws =Oscam users
[account]
user = mmtte
pwd = umty
caid = 0963
au = uk1,uk2
group = 1,2[account]
user = llky
pwd = tyuwk
caid = 0963
au = uk1,uk2
group = 1,2Delete what's in red (don't think it's needed in cccam entry.)
Change configs to values that are in green (so both accounts have access to both cards/groups)
Restart oscam.These 2 user accounts now produce two lines.
c: ip.of.server port mmtte umtyAnd
c: ip.of server port llky tyuwk
On your Duo2:
If your using oscam in your duo2, use this tool to convert either or both c-lines (you only need to use one in your duo):
http://linuxsat-support.com/attachment.php?attachmentid=10388&d=1344884910
(it will create a "reader" which will go into your oscam.server config on your duo)
The output from the tool will look something like this:Quote[reader]
label=ip.of.server
enable=1
protocol=cccam
device=ip.of.server,port
user=mmtte
password=umty
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0Then restart oscam on duo2.
Or you can just use cccam 2.3.0 on your duo2 and paste one of the c-lines into the cccam.cfg.
Let us know how you go
-
On your PC server:
Delete what's in red (don't think it's needed in cccam entry.)
Change configs to values that are in green (so both accounts have access to both cards/groups)
Restart oscam.These 2 user accounts now produce two lines.
c: ip.of.server port mmtte umtyAnd
c: ip.of server port llky tyuwk
On your Duo2:
If your using oscam in your duo2, use this tool to convert either or both c-lines (you only need to use one in your duo):
http://linuxsat-support.com/attachment.php?attachmentid=10388&d=1344884910
(it will create a "reader" which will go into your oscam.server config on your duo)
The output from the tool will look something like this:Then restart oscam on duo2.
Or you can just use cccam 2.3.0 on your duo2 and paste one of the c-lines into the cccam.cfg.
Let us know how you go
Not working for me- I used the Ccam 2.3.0 on the duo2 and have a c line created but it show offline under the user in the oscam webinfo . oscam is reading card fine but dont know what am doing badly. i need help because the c line created is not working and off line.
-
Could your server ip have changed within your network, have you set up a static ip on it?
It should be the same ip that you use to see the oscam webif. (minus the port number of course) -
Could your server ip have changed within your network, have you set up a static ip on it?
It should be the same ip that you use to see the oscam webif. (minus the port number of course)my server ip is the same i can login via putty and winSCP with no issues and oscam now reading the two cards ok but for some reason i don't understand the line created are off line and not working. This is something I will like to find solution to any help from the forum will be appreciated. Thanks for your help so far guys.
-
Hi guys,
I have this up and running but needs to configure to use to different ports i have the following but not connecting
oscam config
global]
logfile = /var/oscamlog/oscam.log
nice = -1
maxlogsize = 19999
preferlocalcards = 1
emmlogdir = /var/oscamlog/[webif]
httpport = xxxx
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httprefresh = 15[cccam]
port = 1531
reshare = 2[cccam]
port = 1532
reshare = 2 -
Which ports are you trying to configure and for what exactly ?
-
Which ports are you trying to configure and for what exactly ?
I have this set up before Automated Oscam/CCcam 2.1.3 Install Package For Ubuntu Server 11.10, 12.xx & 13.04 x32/x64 and have two separate port one for myself and the second port is my mates and brother inlaw .
presently only one port can work.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!