hi all,
i have a 16g usb inserted in the back of my vu solo, it holds the epg info and picons for 28.2, can i also set this up to record programs ? as i dont record much it would be big enough for me, or do i need to go out and buy a hdd ? also is there a tut to capture and post crash logs anywher, been looking but couldnt find one, thanks
usb recording
- lacierva
- Thread is marked as Resolved.
-
-
You should still be able to fit a film or so on there, as for the recording location, when you add the timer, you specify where to save it, media/hdd/movies is usually set, but it can be set to usb.
-
using black hole 1.7.6. and dont get option when i set timer where to save it ?
-
you may have to set it up in Hard Disk settings?
Haven't used BH for a while but lookout for HDD or Hard Disk in the settings menu!
You should be able to set destination there (can in vix anyways lol)
-
if that doesn't work try below mate found specifically for BlackHole!
How to setup your Vu+ box for recording on an usb stick or on another device connected to an usb port.
Mount your usb stick by Devices Manager as /media/usb
Blue Panel > Black Hole Settings > Devices Manager > Mountpoints ...By a software FTP or by telnet
create a folder named movie on your usb stick: /media/usb/movieEnable Expert mode in Customize menu:
Menu > Setup > System > Customize > Setup Mode: ExpertChange the default paths for recordings:
open theRecordings Paths panelMenu > Setup > Sytem > Recording Path
Select the item Default movie location and press the OK button
then press the Menu button and select the item Switch to filelist
now you will be able to navigate through the directories and to select the path
/media/usb/movie by pressing the green buttonAfter you pressed the green button and returned to the Recordings Paths panel
select the item Timer record location by pressing the OK button
and select the path /media/usb/movie by pressing the arrow down button
then press the OK button to save and to return to Recordings Paths panelSelect the item Instant record location by pressing the OK button
and select the path /media/usb/movie by pressing the arrow down button
then press the OK button to save and to return to Recordings Paths panelSelect the item Timeshift location and press the OK button
then press the Menu button and select the item Switch to filelist
navigate through the directories and select the path /media/usb/movie by pressing the green buttonNow you will return to the Recordings Paths panel and you have to press the green button to save all the setting and to exit from the panel.
Thanks to Mito (google via vupluscommunity)
-
Just a rough guide to bear in mind on file size types when recording!
4gb per hour of HD recording
2gb per hour of SD recording(estimates only - dependant on channel recording)
-
master G
Moved the thread from forum Vu+ SOLO Support to forum VU+ SOLO.
VU+ SOLO PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!