new usb hub not picked up

There are 6 replies in this Thread which was already clicked 768 times. The last Post () by mrgmx.

    grep hub
    [ 0.139254] usbcore: registered new interface driver hub
    [ 0.780360] hub 1-0:1.0: USB hub found
    [ 0.780371] hub 1-0:1.0: 6 ports detected
    [ 0.856482] hub 2-0:1.0: USB hub found
    [ 0.856504] hub 2-0:1.0: 3 ports detected
    [ 0.948493] hub 3-0:1.0: USB hub found
    [ 0.948516] hub 3-0:1.0: 3 ports detected

    smartgo moved to new hub light on smargo


    lsusb says


    lsusb
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121


    grep hub
    [ 0.139254] usbcore: registered new interface driver hub
    [ 0.780360] hub 1-0:1.0: USB hub found
    [ 0.780371] hub 1-0:1.0: 6 ports detected
    [ 0.856482] hub 2-0:1.0: USB hub found
    [ 0.856504] hub 2-0:1.0: 3 ports detected
    [ 0.948493] hub 3-0:1.0: USB hub found
    [ 0.948516] hub 3-0:1.0: 3 ports detected
    root@cardshare:~#


    on other command, its a 7 usb hub smartgo not picked up


    With the hub and smargo connected try this :


    ls /dev/ttyUSB0


    or


    ls /dev/ttyUSB1


    nothing


    scaned usb from oscam


    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    iProduct 2 EHCI Host Controller
    iSerial 1 0000:00:03.3
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    iProduct 2 OHCI Host Controller
    iSerial 1 0000:00:03.0
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    iProduct 2 OHCI Host Controller
    iSerial 1 0000:00:03.1
    Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
    iProduct 2 Smart Card Reader USB
    iSerial 0

    solved it, the 2 usb at back didnt work, the 4 at bottom in a pci card do work


    weird as they powered the mouse and keyboard ok


    lsusb
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
    Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
    Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
    Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

    Seamouse,



    Post everything on the forum in your thread mate...Sending Msgs to me or people just confuses everything and is no help to others if
    they are following you post bud









    Now you have located the Hub if you use 001:005 in you oscam server file and RESTART OSCAM ONLY it should pick it up and read the card!



    From what you email is stating....if the reader isn't/wasn't connect to server then how can it be read/transmit????



    Just bare in mind again.....When you restart your Server your USB port IDs may change........If you don't need to
    restart SERVER(PC) just restart OSCAM in Webif.....leave it a little while and log back in!



    SIMPLES



    Ps Buddy,



    Almost everything you have asked about since joining has been covered in some shape or form within the forum....whilst i appriciate that it may not have been
    like for like e.t.c....Setting Up Errors, Connecting Errors, Omnikey and Smargo Setup, USB Hub problems the list goes on are all covered here as these
    are probably the most covered Problems/Topics within CS.......keeping a clear mind whilst reading the info and trying before posting should
    get you there...after all when your setup you need to know exactly how everything works and what problems may occur!!



    As a support Forum run and maintained by Admin and Users off there own back your level of service/help/support looking back the attention to your problems from
    all the various users has been second to none....laid out clearly with various links and examples...with response times better than Harrods lol and you have to spend money there!


    All this takes time, patience and effort and is ultimatly done for FREE with the support of People that make Donations to the Forum or by
    becoming a VIP in support of the forum. This is something you may wish to take the time to look at in the future!



    Support the Forum - Become a VIP


    Support the Forum - Make a Donation....Every little Helps!





    Keep plugging along mate, the satisfaction that comes when getting it all sorted is worth it.



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login