CS Link

I have activated the card but its still showing no entitlements.

The reader is oscam looks as follows -

[reader]
label = smargo2
protocol = pcsc
device = 001:005
#detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 2
mhz = 600
cardmhz = 600
caid = 0666:000000
#caid = 0D0F

I have also tried with the caid, commented out above.

I made some progress...

The device id had changed, and ive tried what you suggested but either way im still getting the following -

1/09/2012 16:48:24 85C4A30 r smargo2 [pcsc] card detected
1/09/2012 16:48:24 85C4A30 r smargo2 [pcsc] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
1/09/2012 16:48:25 85C4A30 r smargo2 [pcsc] Hist. Bytes: I***** ACS V6.0
1/09/2012 16:48:25 85C4A30 r smargo2 [pcsc] detect i***** card
1/09/2012 16:48:25 85C4A30 r smargo2 [pcsc] WARNING: ACS57 card can require the CamKey from config
1/09/2012 16:48:25 85C4A30 r smargo2 [pcsc] caid: 0666, acs: 0.06, country code: CZE
1/09/2012 16:48:26 85C4A30 r smargo2 [pcsc] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
1/09/2012 16:48:26 85C4A30 r smargo2 [pcsc] You have a bad Cam Key set
1/09/2012 16:48:26 85C4A30 r smargo2 [pcsc] card system not supported
1/09/2012 16:48:26 85C4A30 r smargo2 [pcsc] Normal mode failed, reverting to Deprecated Mode

I put smargo as that what I was going to use originally my bad there, they are omnikeys.

Where do I get the corresponding camkey/camdata from, or which patched version of OSCam?

Thanks for this, but... is there an x86 one for Ubuntu

Ok how would I get these keys, your replies don't give me much to go off.

After much more searching I managed to fnd the following -

I tried to upload the files to my server, to no avail, for some reason wouldn't let me upload, I checked proftp.conf and write was enabled and I have write permission to the folder and files within that folder.

I have loaded the configs onto my box and OSCam wouldn't start, so I swapped the binary with the one included and put the script in the cam script folder and still OSCam wouldn't start.

TL;DR I have got absolutely nowhere :(

Hi sorry haven't been on since I posted this, will give it a try tomorrow.

I am trying to setthis up using the latest version of oscam, so the config is more portable, so I have installed and got running the latest version of oscam on my duo and changed the settings to -

[reader]
label = cslink
enable = 1
protocol = internal
device = dev/sci1
caid = 0666
#rsakey = xxx
force_i***** = 1
#boxkey = xxx
detect = none
mhz = 961
cardmhz = 357
ident = 0666:000000
group = 1
emmcache = 1,3,2

Have tried both 0 and 1 for the device number (is in top slot), the error says -

2012/09/08 10:54:50 1830 7732B4B0 r ERROR opening device dev/sci1
2012/09/08 10:54:50 1830 7732B4B0 r Cannot open device: dev/sci1

or 0 doesnt matter which I put.

EDIT: Ive also tried the uploaded files, and run it manually as suggested, and get the following error ->

2012/09/08 12:18:02 76100790 r ERROR: Could not read reader->convention

Trying various other tweaks, gives the error opening device message....

Now im stuck

I bet its something obvious as f**k but I give up again for now :@

Nearly got it, working not convinced ive quite got it right.... But a damn site closer!

I managed to resolve it in the end, might be interesting to compare configs, as I did a lot of fing about my are quite long winded a lot of values can be taken out of mine, which I need to do anyway in order to move them over to my ubuntu server.

In the post above when I said mine was probably something daft, I ddidn't upgrade the version of oscam high enough and I hadn't put the newcam config info in.

Ive just got one job I need to do first then ill make this my next job of the day.

Ok here goes -

oscam.user
[account]
user = vu_reader
pwd = pwd
group = 1
uniq = 2
monlevel = 0
au = CSLINK
keepalive = 1

oscam.srvid
#CSLink neplacene
0666:13F1|CSLink| Jednotka
0666:13F2|CSLink| Dvojka
0666:13EF|CSLink| Markiza
0666:13F0|CSLink| Doma
0666:13ED|CSLink| Joj
0666:13EE|CSLink| Joj Plus
0666:1F43|CSLink| CT1
0666:1f41|CSLink| CT1 Jizní Morava
0666:1f45|CSLink| CT1 Severní Morava
0666:1F44|CSLink| CT2
0666:1F47|CSLink| CT4
0666:36F6|CSLink| CT HD
0666:1F42|CSLink| Prima Falmily
0666:13A8|CSLink| Prima Falmily HD
0666:3351|CSLink| Prima Cool
0666:3355|CSLink| Prima Love
0666:3352|CSLink| N***
0666:13A6|CSLink| N*** HD
0666:3353|CSLink| N*** Cinema
0666:13D3|CSLink| TV Barrandov

#CSLink placene
0666:5156|CSLink| AXN
0666:5157|CSLink| AXN Crime
0666:5158|CSLink| AXN Sci-Fi
0666:1B72|CSLink| Brava HDTV
0666:3339|CSLink| Cinemax
0666:332C|CSLink| CS Film/CS Mini
0666:0000|CSLink| Daring! TV
0666:3336|CSLink| Disney Channel
0666:3331|CSLink| Eurosport
0666:3360|CSLink| Eurosport 2
0666:332E|CSLink| Film +
0666:334A|CSLink| Filmbox
0666:334B|CSLink| Filmbox plus
0666:3334|CSLink| Fishing & Hunting
0666:3330|CSLink| HBO
0666:3335|CSLink| HBO 2
0666:07FB|CSLink| Hustler
0666:333F|CSLink| Leo TV
0666:3337|CSLink| Minimax
0666:3354|CSLink| MTV
0666:13DD|CSLink| NGC
0666:13D0|CSLink| NGC Wild
0666:36F7|CSLink| N*** Sport
0666:13D5|CSLink| Retro Music TV
0666:333E|CSLink| Spectrum
0666:334D|CSLink| Sport 1
0666:334E|CSLink| Sport 2
0666:332D|CSLink| Sport 5
0666:333D|CSLink| Universal Channel

Quote

oscam.services

[cslink_neplacene]
caid = 0666
provid =
srvid = 13F1,13F2,13EF,13F0,13ED,13EE,13D3,1F41,1F43,1F44,1F45,1F47,36F6,3352,3353,3351,3355,1F42,13A8,13A6

[cslink_placene]
caid = 0666
provid =
srvid = 5156,5157,5158,1B72,3339,332C,3336,3331,3360,332E,334A,334B,3334,3330,3335,07FB,333F,3337,3354,13DD,13D0,36F7,13D5,333E,334D,334E,332D,333D

Display More

oscam.server
[reader]
label = CSLINK
Protocol = internal
detect = nome
device = /dev/sci0
caid = 0666
mhz = 961
cardmhz = 600
ident = 0666:000000
group = 1
emmcache = 1,3,2
ecmwhitelist = 0666@000000,40,46,50

oscam.provid

0D03:000000|***link|23.5E|Sl***k
0D03:000004|***link|23.5E|Czech/Sl***k
0D03:000008|***link|23.5E|Czech/Sl***k
0D03:000020|***link|23.5E|Czech/Sl***k
0D03:000024|***link|23.5E|Czech/Sl***k
0D03:000028|***link|23.5E|Czech/Sl***k
0D70:000000|***Link|23.5E|Sl***k
0D70:000004|***Link|23.5E|Sl***k
0D70:000008|***Link|23.5E|Sl***k
0D70:00000C|***Link|23.5E|Sl***k
0D70:000010|***Link|23.5E|Sl***k
0D0F:000000|CS Link|23.5E|Czech
0D0F:000008|CS Link|23.5E|Czech
0D0F:000004|CS Link|23.5E|Czech
0666:000000|CS Link|23.5E|Czech
0D96:000000|***link|23.5E|Sl***k
0D96:000004|***Link|23.5E|Sl***k
0D96:000008|***Link|23.5E|Sl***k
0D96:00000C|***Link|23.5E|Sl***k
0D96:000010|***Link|23.5E|Sl***k
0624:000000|***link|23.5E|Sl***k
0D02:0000A0|UPC DTH|0.8W|Czech/Sl***k
0D02:0000A0|UPC DTH|19.2E|Czech/Sl***k

oscam.dvapi
P: 0666
I: 0

oscam.conf
[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
emmlogdir = /tmp/emm
disablelog = 1
disableuserfile = 1
disablemail = 1
loghistorysize = 4096
clienttimeout = 3500
fallbacktimeout = 3000
clientmaxidle = 120
cachedelay = 150
bindwait = 120
netprio = 0
unlockparental = 1
nice = -1
serialreadertimeout = 1500
maxlogsize = 250
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = vu_reader

[webif]
httpport = 8888
httphelplang = en
httpuser = root
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 1

[newcamd]
Key = 0102030405060708091011121314
Port = 15000@0666:000000

[HR][/HR]
I have removed all the ones, I feel safe removing. If anyone else can see any other settings I can safely remove, please let me know.

The other question I have is obviously I would have to setup the other reader, but if I did one to use s*y then what would I need to do under the [newcamd] header
[HR][/HR]
Editions made -
Version 1.1 - Removed load balance configs, and oscam.services (its in code tags for now but will be removed when confirmed working without)