Back to basics ¬ try a different ethernet cable ? Global reboot - That means everything _ Then double check via router when everything has rebooted for I.P clashes !
is the macine visible via the HOME NETWORK page of the router ?
There are 30 replies in this Thread which was already clicked 1,871 times. The last Post () by top gooner.
Back to basics ¬ try a different ethernet cable ? Global reboot - That means everything _ Then double check via router when everything has rebooted for I.P clashes !
is the macine visible via the HOME NETWORK page of the router ?
hi rikjaard
i can connect to the server via teamviewer on network and away from server, i can winscp to it and connect to the internet with it so i cant see it being cable its also a brand new cable , but i will try new cable, ive allowed ports in router but i have just checked and the server isnt showing up on the router.................. i share a c line with a friend earlier and i could get *** 1 running no probs, but i cant seem to share my card internally at all or externally like my post says i have put hours and hours into this and getting no where lol also my server ip is well away from other interferences
Remove the ecmwhitelist line completley, save then reboot the server. It seems the changes you are making are not being applied so maybe change oscam version also.
oscam is 7209 ten........ removed ecm white list and rebooted im now getting
8/09/2012 01:47:23 B7302B28 c client connected to 12000 port
8/09/2012 01:47:24 B7308DF8 c client connected to 12000 port
8/09/2012 01:47:24 B73043F8 c WARNING: invalid client tcp_conn_close()
8/09/2012 01:47:24 B73043F8 c anonymous disconnected from 92.7.91.126
8/09/2012 01:47:24 B73043F8 c thread B6ADFB70 ended!
8/09/2012 01:47:25 B7305CC8 c ***UK (0963&000000/0000/125D/62:60FB): rejected group (120 ms) (0/0/0/0) (no matching reader)
8/09/2012 01:47:27 B7305CC8 c ***UK (0963&000000/0000/232C/62:6A52): rejected group (120 ms) (0/0/0/0) (no matching reader)
8/09/2012 01:47:28 B7302B28 c WARNING: invalid client tcp_conn_close()
8/09/2012 01:47:28 B7302B28 c anonymous disconnected from 94.171.90.233
8/09/2012 01:47:28 B7302B28 c thread B7417B70 ended!
8/09/2012 01:47:30 B7308DF8 c WARNING: invalid client tcp_conn_close()
8/09/2012 01:47:30 B7308DF8 c anonymous disconnected from 94.171.90.233
8/09/2012 01:47:30 B7308DF8 c thread B6AC7B70 ended!
8/09/2012 01:47:33 B7305CC8 c ***UK (0963&000000/0000/125D/62:7E0B): rejected group (120 ms) (0/0/0/0) (no matching reader)
8/09/2012 01:47:34 B7307598 c client connected to 12000 port
8/09/2012 01:47:35 B7305CC8 c ***UK (0963&000000/0000/232C/62:D083): rejected group (120 ms) (0/0/0/0) (no matching reader)
8/09/2012 01:47:37 B7302B28 c client connected to 12000 port
8/09/2012 01:47:39 B7308DF8 c client connected to 12000 port
8/09/2012 01:47:39 B7307598 c WARNING: invalid client tcp_conn_close()
8/09/2012 01:47:39 B7307598 c anonymous disconnected from 92.7.91.126
8/09/2012 01:47:39 B7307598 c thread B6AC7B70 ended!
what card reader do you have mate , also are u shure its not a crossover cable u have used, also is port forwarding sorted on your router,, get back to me asap. and il try and help.
hello promo7uk cheers for replying, sorry gave up the will to live at 3 this morning lol...................... im using omnikey 3121 port forwarding is done in router and its cat 6 cable new cable.
im going to b in and out today so will try and get in every time its poss, speak soon
Check your server listen port in CCcam, in oscam you set this as 14451 yet the logs you posted show clients trying to connect to port 12000.
Quote8/09/2012 01:47:23 B7302B28 c client connected to 12000 port
8/09/2012 01:47:24 B7308DF8 c client connected to 12000 port
8/09/2012 01:47:24 B73043F8 c WARNING: invalid client tcp_conn_close()
8/09/2012 01:47:24 B73043F8 c anonymous disconnected from 92.7.91.126
8/09/2012 01:47:24 B73043F8 c thread B6ADFB70 ended!
hello ten this is my cccam file buddy
SERVER LISTEN PORT : 14451
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
DISABLE EMM : yes
EXTRA EMM LEVEL : no
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
#MINIMUM DOWNHOPS: 1
#####################################################
# oscam/cccam N line connection #
N: 127.0.0.1 12000 ***UK theserver 01 02 03 04 05 06 07 08 09 10 11 12 13 14
so i set cccam port to 14451 and the n line conection to 12000.......... should i change these mate...
ok got rid of the {
8/09/2012 01:47:24 B7308DF8 c client connected to 12000 port } it was because i had opened that port on the router, thats your fault mrgmx lmfao............. removed and got rid off.
but we r still back to the 8/09/2012 14:36:39 B7202B28 c ***UK (0963&000000/0000/1290/62:0626): rejected group (120 ms) (0/0/0/0) (no matching reader) thingy.......... i did notice in oscam that the reader had been idle for 7 hrs
ok i had it working for bout 10 mins earlier everything was working fine.......... rebooted server then all went wrong again............ ive rechanged all settings i changed.
now ive only got external share working, no internal shares work at all, cccam webinfo says they are all connected but not active. were getting closer lol
ok well i dont no what i have done but it all seems to b working now................................... would just like to say a big thanks to all that has helped me on this thread cheers guys
Don’t have an account yet? Register yourself now and be a part of our community!