Hi, all i did have a post on the end of "Automated Oscam/CCcam 2.1.3 Install Package For Debian 6" but it disappeared, so here i go again...
I have linux setup, with smargo reader
cccam & oscam are running fine and i can access the web interfaces...
im having issues with my smargo.
oscam logs, read>
25/09/2012 16:30:30 8766A28 r Found smartreader device 002:005
25/09/2012 16:30:30 8766A28 r ***uk [smartreader] Reader initialized (device=002:005, detect=cd, mhz=357, cardmhz=357)
25/09/2012 16:30:31 8766A28 r ***uk [smartreader] card detected
25/09/2012 16:30:35 8766A28 r ***uk [smartreader] usb bulk write failed : ret = -4
25/09/2012 16:30:35 0 ***uk [smartreader] SR: USB bulk read failed with error 5
25/09/2012 16:30:35 8766A28 r ***uk [smartreader] usb bulk write failed : ret = -1
25/09/2012 16:30:35 0 ***uk [smartreader] SR: USB bulk read failed with error 5
25/09/2012 16:30:35 8766A28 r ***uk [smartreader] usb bulk write failed : ret = -1
25/09/2012 16:31:31 8766A28 r ***uk [smartreader] Error activating card.
25/09/2012 16:31:31 8766A28 r ***uk [smartreader] card initializing error
lsusb read>
root@cmysserverr:~# lsusb
Bus 002 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
dmesg read>
[ 0.000000] console [ tty0] enabled
[ 1.176887] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.177137] 00 : 06 : ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.058880] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 5.058974] usb 6-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 6.683229] usb 6-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 6.705254] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 4.765154] USB Serial support registered for generic
[ 4.765223] usbcore: registered new interface driver usbserial_generic
[ 4.765225] usbserial: USB Serial Driver core
[ 5.057088] USB Serial support registered for FTDI USB Serial Device
[ 5.057146] ftdi_sio 6-2:1.0: FTDI USB Serial Device converter detected
[ 5.057188] usb 6-2: Detected FT232BM
[ 5.057190] usb 6-2: Number of endpoints 2
[ 5.057192] usb 6-2: Endpoint 1 MaxPacketSize 64
[ 5.057193] usb 6-2: Endpoint 2 MaxPacketSize 64
[ 5.057195] usb 6-2: Setting MaxPacketSize 64
[ 5.058880] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 5.058974] usb 6-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.058993] usbcore: registered new interface driver ftdi_sio
[ 5.058995] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 6.683229] usb 6-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 6.705254] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Any suggestions please?
is my smargo card faulty?