oscam ecm really high

There are 12 replies in this Thread which was already clicked 7,759 times. The last Post () by dreamuser.

    ok im just sick of oscam and just guna have to go bk to cccam and cancel espn if i can get this sorted.


    In oscam 192 page the ecm times are around 230ms and went i have a few boxes on they freeze n glitch.


    I have been reading post for days and trying thimgs and still no luck.


    I`m using debain 6 with autoinstall oscam 120.


    Reader smartreader, in my oscam.server i cant put the mhz or ther card doesnt read, if i put say mhz 480 it say somefing about no matching reader and doesnt read card,.


    So how can i get the ecm times down to 80ms like they meant to be ? do i need to install or update my usb drivers ?


    I even tryed a usb 2.0 hub and it made no different, maybe u have to use a certain type.


    Any1 no what could be wrong, heres my oscam.server ?


    [reader]
    label = *** uk
    protocol = smartreader/mouse
    device = /dev/ttyUSB0
    detect = cd
    cardmhz = 600
    #mhz = 600
    boxid = blank
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    emmcache = 1,3,2
    group = 1
    lb_weight = 101


    and i have a server.bak its more less the same as above

    Are they freezing to other devices on your lan? Wierd/wireless? ISP? Which router?


    mhz = 600
    boxid =


    is the correct format for these.


    I am not obligated, or connected to any particular brand, seller or retailer so any opinions given are not biased in anyway.
    Any information given is for hobby and research purposes only, and whilst every effort is made to ensure that all my responses are accurate, - Any action you may take based on my replies is done so at your own risk.
    Viewing Premium Channels or Media, without paying for them is illegal and if you do so, you do so at your own risk!

    BpGgW.jpg



    yes they are freezing on my lan to, but worse at my brothers house, i have a netgear router and virgin 30mb, i didnt write anything in boxid+ i just meant i left it blank, and foe the mhz if i dnt blank it out it doesnt read card at all, it says (0963&000000/0000/D7AB/62:C7F1): rejected group (120 ms) (0/0/0/0) (no matching reader) , its not the router or isp, in oscam 192.168.2.6:8888 its taking 230ms to read card and thats with 1 box connected, if i goto my dm800 192:8888 page it reads at 80ms and ecm times on my boxes using the dm800 sit around 130, 150, so theirs something very wrong but dnt no what
    dreamuser

    In your local network ecm times are lower for shure.In my opinion the value of 230ms is not that high to cause your peer that much freezing.

    Quote from dreamuser

    and ecm times on my boxes using the dm800 sit around 130, 150


    Hmm.. 130ms to read is not "that" bad.. Could be just your reader / server beeing a bit slower than others.


    What is the network latency to your friends box ?


    Do a 'ping <remoteip>' and check the latency...


    Also i agree with satmate, 200~275 ms shouldn't make *** UK freeze.

    that much freezing, i dnt want any, i didnt get any when i had cccam installed, how can that not b high, with just 1 box the ecm time in the box is arounf 230 to 250, when i connect ten boxs its over 6, when the boxes are not local the ecm are in the 1000s, i tryed to watch the box the other nite and the picture broke up even min, my dm800 reads the card at 70 to 80 ms, is their any way to bring dwn the card ecm times, i have 2 hard drives with to different versions of oscam and both read ecm at arounf 220 230, mayb its a firmware or software problem with the usb driver

    • Official Post

    If this is a smargo you are using on a debian the device = is set wrong, also mhz = & cardmhz = should be set on the smargo with the windows update utility, these parameters in oscam are for receivers and don`t work for linux pc servers...


    You will need to telnet to debian with this command lsusb


    You should see something like this [ Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd 8-bit FIFO ]


    This will give you the usb port the smargo is using, then edit the device in oscam.server ( device = 001:002 )



    Delete the server.bak file, its a duplicate file that isn`t needed and may cause issues for you...

    Well,


    Lets get into detail then...


    Some questions:


    - What Oscam version do you run exactly ?
    - What hardware do you run exactly ?
    - Post full oscam.conf / oscam.user / oscam.server / oscam.dvbapi
    - Post loglines showing startup (initialisation)
    - Post loglines showing a few local reads, and remote reads with timings\
    - Post the result of command 'lsusb' on your server
    - Post the result of command 'ping <remote peer>' from your server
    - Post the result of command 'ping <oscamserver>' from your receiver


    That will give a good starting point to analyse.


    Also, please try to use the '.' key more in your posts, it will make your posts a bit more easy to read and understand.

    ok sorry will do and the card only read at 120 wen its rejected group, when the card is working, its around 220, ok im using.
    IBM BIOS, SMP system with 1p processor, pentium 3, i think their a 1gb of ram...it has the word SERVER in middle if screen..
    oscam version..1.20-unstable_svn7209
    im not sure hoe tp ping the remote peer but i did type ping oscam and it give me loads of this..
    64 bytes from advancedsearch.virginmedia.com (81.200.64.50): icmp_req=1033 ttl=53 time=28.9 ms
    64 bytes from advancedsearch.virginmedia.com (81.200.64.50): icmp_req=1034 ttl=5
    i did try using 001:002 but gives Error activating card. i tryed the windows update utility, i change from auto to fix but wouldnt read card, heres what i get in 192:8888 page if change to 001:002
    26/09/2012 15:40:33 90F59D8 c encrypted newcamd:10002-client 127.0.0.1 granted (test1, au=on (1 reader))
    26/09/2012 15:40:33 90F59D8 c user test1 authenticated successfully (CCcam)
    26/09/2012 15:40:33 90F59D8 c AU disabled for user test1
    26/09/2012 15:41:23 90EB2F8 r slyuk [smartreader] card detected
    26/09/2012 15:41:28 90EB2F8 r slyuk [smartreader] Error activating card.
    26/09/2012 15:41:34 90EB2F8 r slyuk [smartreader] Error activating card.
    26/09/2012 15:41:41 90EB2F8 r slyuk [smartreader] Error activating card.
    26/09/2012 15:41:41 90EB2F8 r slyuk [smartreader] card initializing error


    heres the lsusb:Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


    on the bootup screen i see theses err.starting from top.
    start MTA exim4
    : not founda1: 1:
    : not founda2: 2:
    : not founda3: 3:
    : not founda4: 4:
    /etc/rc.local: 1: /bin/oscript: not found
    warning keyword saveinithistory in global section not recongenized
    warning keyword debug in global section not recongenized
    pidfile allready found, removing old pidfile
    {SCRIPT} start: cccam derver
    Sorry no config present yet, cccam will start with defaults
    plz upload the config file with ftp
    warning key blockemm-u in account section not recongenized
    warning key blockemm-s in account section not recongenized
    warning key blockemm-unknown in account section not recongenized
    warning key blockemm-g in account section not recongenized
    Debian GNI/linux 6.0 debian tty1


    i dnt no why im getting cccam error because i have a config in my var/etc
    [reader]
    label = ***uk
    protocol = smartreader
    enable = 1
    device = 001:002
    detect = cd
    boxid =
    caid = 0963
    ident = 0963:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    lb_weight = 101


    [global]
    nice = -1
    WaitForCards = 1
    preferlocalcards = 1
    ClientTimeout = 1
    CacheDelay = 120
    saveinithistory = 1
    logfile = /var/log/oscam.log
    debug = 255


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    # protocols
    [newcamd]
    key = 0102030405060708091011121314
    port = 10002@0963:000000



    [account]
    user = test1
    pwd = test2
    group = 1
    au = ***uk
    caid = 0963
    ident = 0963:000000
    uniq = 2
    monlevel = 1
    blockemm-u = 0
    blockemm-s = 0
    blockemm-unknown = 1
    blockemm-g = 1



    SERVER LISTEN PORT : 12000
    WEBINFO USERNAME : root
    WEBINFO PASSWORD : dreambox
    TELNETINFO USERNAME : root
    TELNETINFO PASSWORD : dreambox
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME : 3
    OSD USERNAME : root
    OSD PASSWORD : dreambox
    OSD PORT : 80
    #SHOW TIMING : yes
    #MINI OSD : yes
    DEBUG : yes
    NEWCAMD CONF : yes
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    #SOFTKEY FILE : /var/keys/SoftCam.Key
    #AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #CAID PRIO FILE : /var/etc/CCcam.prio
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    MINIMUM CLIENT VERSION : 1.7.0
    MINIMUM DOWNHOPS: 1
    N: 127.0.0.1 10002 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

    ok i got anothe pc and setup debian and oscam/cccam and the ecm have droped by 100ms, they sit at around 135 till 145 in box, they say pc server is better than dreambox but my dm800 gives lower ecm that this, mayb try a different reader just to see
    dreamuser

    Have you tried an Omnikey Cardman 3121? You can get them off eBay for about £8.


    They are supposed to be one of the fastest readers from what i have read.


    Nano

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login