alow only selected channels

F: user pass 0 0 0 { 0:0:2, 0963:000000 } { 0963:000000:C5A8 } { }

Never restricted the channels to this extent, but the above should work i think, provided Racing UK is on your local - above is sharing your local only, hence the first number is set to 0 to tell it to share no hops.

scrap that it doesn't seem to be working - I was going by something I found on the net but indicting a service seems to block rather than allow. Seems you might well have to block everything else off rather than define what you want, which can be done, but you will have a long fline!

i got my original info from a guide - but it contradicts the info that is noted on my CCcam.cfg

Quote

Restricting shares

If you want to restrict what your peers get, you have to configure your peer's F line to which you want to block a card in the following manner. The following example restricts Canal+ Digitaal Nederland (19E). You can change to whatever caid you want:

F: user pass 3 0 1 { 0:0:3, 0100:00006a } { 0100:00006a:07d4, 0100:00006a:07d5 } { } change-to-user's-ip

Therefore user will not be allowed to view Canal+ Digitaal Nederland (19E) (0100:00006a) but is allowed to view the following two channels on Canal+ Digitaal Nederland (19E): Rtl 4 (0100:00006a:07d4), Rtl 5 (0100:00006a:07d5)

If you want to allow him to view Canal+ Digitaal Nederland (19E) but not to share it you have to add a ‘:1’ :

F: user pass 3 0 1 { 0:0:3, 0100:00006a:1 } { } { } change-to-user's-ip

Display More

the above you can test - but it might be wrong - the following is more likely to be correct;

Quote

# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
# He is also not allowed to view channel 0100:000080:15df
#

Display More

both these guides seem to contradict one another - but you can use both of them to try out what you want to do - as I said, it is possible, but you might need to define the ones that need to be blocked rather than what doesn't according to the second guide.

You could always use Oscam as your server - it is much easier to restrict shares with Oscam.