csp does not work after a few hours

There is 1 reply in this Thread which was already clicked 3,994 times. The last Post () by Banny.

    csp does not work after a few hours
    I have the following problem: after 1 day of operation of csp, users can not connect to csp. This problem is solved by restarting the linux. The OSCAM ok.


    config csp


    <cardserv-proxy ver="0.9.0">


    <ca-profiles>
    <default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>
    <block-caid-mismatch>true</block-caid-mismatch>
    <max-threads>45000</max-threads>
    <default-deny-list></default-deny-list>
    <session-timeout>5</session-timeout>
    <session-keepalive excluded-clients="">3</session-keepalive>
    <newcamd-maxmsgsize>480</newcamd-maxmsgsize>
    <block-caid-mismatch>false</block-caid-mismatch>


    <!--######################################################-->
    <!--##**************INICIA PROFILE TELF*****************##-->
    <!--######################################################-->



    <profile name="NetBH" ca-id="1802" network-id="0002" provider-idents="00 00 00" enabled="true" debug="false">
    <newcamd listen-port="35010"/>
    <no-encryption>false</no-encryption>
    <no-validation>false</no-validation>
    <exclude-profiles></exclude-profiles>
    <load-balance>true</load-balance>
    <services-file format="cccam" ca-id="1802" provider="000000">etc/net.channelinfo</services-file>
    <max-cw-wait>150</max-cw-wait>
    </profile>



    </ca-profiles>



    <logging log-ecm="false" log-emm="false" log-zapping="false" hide-ip-addresses="false">
    <log-file rotate-count="10" rotate-max-size="1024">log/cardserv.log</log-file>
    <log-level>SEVERE</log-level>
    <silent>true</silent>
    <debug>false</debug>
    </logging>



    <rmi>
    <display-name>CSP_PT TurboCache</display-name>
    <allowed-ip-masks></allowed-ip-masks>
    <registry-port>6042</registry-port>
    <local-port>5032</local-port>
    <status-web>
    <listen-port>35050</listen-port>
    <ssl enabled="false">
    <keystore password="xxxxx3">etc/csp_keystore</keystore>
    </ssl>
    <war-file>lib/cs-status.war</war-file>
    <welcome-file>cs-status.html</welcome-file>
    <super-users>administrador</super-users>
    </status-web>
    </rmi>

    <user-manager class="com.bowman.cardserv.XmlUserManager" allow-on-failure="false" log-failures="true">
    <auth-config>-->



    <user name="administrador" password="313233" max-connections="1" admin="true" enabled="true" />
    <update-interval>1</update-interval>
    <user-source name="gerenciadorcsp">
    <user-file-url>http://192.168.0.30:8080/genxml/genxml.php</user-file-url>
    </user-source>
    <update-interval>2</update-interval>



    </auth-config>
    </user-manager>




    <connection-manager>
    <reconnect-interval>10</reconnect-interval>
    <max-cw-wait>15</max-cw-wait>
    <default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>
    <default-keepalive-interval>30</default-keepalive-interval>
    <default-client-id>00 00</default-client-id>
    <default-min-delay>10</default-min-delay>
    <default-max-queue>1220</default-max-queue>


    <service-map>
    <mapper>
    <enabled>true</enabled>
    <unknown-sid>99aa</unknown-sid>
    <block-services>0065 0066 0067 0068 0069 006a</block-services>
    <cache-dir>cache</cache-dir>
    <hide-disabled-connectors>true</hide-disabled-connectors>
    <cache-save-age>300</cache-save-age>
    <auto-map-services>true</auto-map-services>
    <auto-reset-threshold>30</auto-reset-threshold>
    <broadcast-missing-sid>false</broadcast-missing-sid>
    <hide-unknown-services>false</hide-unknown-services>
    <log-missing-sid>true</log-missing-sid>
    <hide-disabled-connectors>true</hide-disabled-connectors>
    <redundant-forwarding>false</redundant-forwarding>
    <dummy-services>0 101 1101</dummy-services>
    <reset-services></reset-services>
    </mapper>

    </service-map>



    <cws-connectors>


    <newcamd-connector name="Oscam" profile="NetBH" enabled="true" metric="0">
    <host>192.168.0.30</host>
    <port>9191</port>
    <user>csp</user>
    <password>csp</password>
    <asynchronous>true</asynchronous>
    <au-users></au-users>
    <caid-profile-map>1802=netbh</caid-profile-map>
    <can-decode-services></can-decode-services>
    <cannot-decode-services></cannot-decode-services>
    </newcamd-connector>




    </cws-connectors>



    </connection-manager>


    <proxy-plugins>

    <!--#################################################################-->
    <!--##***********INICIA Cache Plugin CONFIGURACAO***************##-->
    <!--#################################################################-->
    <plugin class="com.bowman.cardserv.CacheCoveragePlugin" enabled="true" jar-file="cachecoverageplugin.jar">
    <plugin-config>

    <cache-context network-id="0002" ca-id="1802" interval="15"/>
    </plugin-config>
    </plugin>



    <!--#################################################################-->
    <!--##*************INICIA LoggingPugin CONFIGURACAO****************##-->
    <!--#################################################################-->
    <plugin class="com.bowman.cardserv.LoggingPlugin" enabled="false">
    <plugin-config>
    <log-dir>log/traffic</log-dir>
    <log-level>ALL</log-level>
    <ip-filter>*</ip-filter>
    </plugin-config>
    </plugin>

    <!--#################################################################-->
    <!--##***********INICIA DcwFilterPlugin CONFIGURACAO***************##-->
    <!--#################################################################-->

    <plugin class="com.bowman.cardserv.DcwFilterPlugin" enabled="true" jar-file="dcwfilterplugin.jar"/>
    <plugin-config>
    <bad-dcw>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01</bad-dcw>
    <bad-dcw>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00</bad-dcw>
    <bad-dcw>01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16</bad-dcw>
    <bad-dcw>00 00 00 00 00 00 3C 3C 00 00 00 00 00 00 3C 3C</bad-dcw>
    <detect-links>true</detect-links>
    <verify-replies>true</verify-replies>
    </plugin-config>

    <!--#################################################################-->
    <!--##***************INICIA GeoipPlugin CONFIGURACAO***************##-->
    <!--#################################################################-->

    <plugin class="com.bowman.cardserv.GeoipPlugin" enabled="false" jar-file="geoipplugin.jar">
    <plugin-config>
    <geoipcity-path>etc/GeoLiteCity.dat</geoipcity-path> <!-- Path to maxmind.com city database -->
    <!-- Free but inaccurate: http://www.maxmind.com/downloa…tabase/GeoLiteCity.dat.gz -->

    <googlemaps-key>AIzaSyAXvxu3xJ5nrXzJhaFyG2SnT1_V--y7j0E</googlemaps-key>
    <!-- Key must match your proxy status web access hostname, free signup @ http://code.google.com/apis/maps/signup.html -->

    <start-lat>62.35</start-lat>
    <start-long>18.066667</start-long>
    <start-zoom>5</start-zoom>
    <!-- Starting center point and zoom level for the map, default roughly = scandinavia -->

    </plugin-config>
    </plugin>

    <!--#################################################################-->
    <!--##************INICIA DreamboxPlugin CONFIGURACAO***************##-->
    <!--#################################################################-->
    <plugin class="com.bowman.cardserv.DreamboxPlugin" enabled="false" jar-file="dreamboxplugin.jar">
    <plugin-config>
    <check-interval>5</check-interval> <!-- the starting interval downloaded installers will be configured for -->
    <agent-web>
    <listen-port>888</listen-port>
    <frontend-host>192.168.2.22</frontend-host> <!-- external hostname boxes will be accessing via -->
    <frontend-port>88</frontend-port> <!-- external port (remove to use same as listen port) -->
    <log-file rotate-count="5" rotate-max-size="2048">log/agent-web-access.log</log-file> <!-- remove to disable -->
    <alternative-connect>false</alternative-connect>
    <!-- if true: use XCNT instead of CONNECT, to avoid anti-abuse/open-proxy-scan blocks (if certain boxes never get output through) -->
    </agent-web>


    <agent-sshd enabled="true"> <!-- starting the sshd requires java6 or newer -->
    <listen-port>2222</listen-port>
    <tunnel-port-range start="2323" count="10"/> <!-- allow clients to open remote tunnel endpoints for these ports -->
    </agent-sshd>


    <file-upload enabled="true"> <!-- allow certain users to upload files, but only to preconfigured locations -->
    <file name="links.cfg" target-path="etc/links.cfg" user="linkslave"/>
    <file name="lamedb" target-path="etc/services.someuser.e2" user="someuser"/>
    <file name="lamedb" target-path="etc/services.otheruser.e2" user="otheruser"/>
    <file name="ecm.info" target-path="/tmp/" user="testuser"/>
    <!-- if target-path is a dir the provided file name will be appended, e.g /tmp/ecm.info -->
    </file-upload>

    </plugin-config>
    </plugin>


    <!--#################################################################-->
    <!--##***********INICIA MessagingPlugin CONFIGURACAO***************##-->
    <!--#################################################################-->

    <plugin class="com.bowman.cardserv.MessagingPlugin" enabled="false" jar-file="messagingplugin.jar">
    <plugin-config>
    <auto-mgcamd-osd min-interval="20" enabled="true"> <!-- min interval is flood protection, in seconds -->
    <exclude-users></exclude-users> <!-- never send to these even if they do id as mgcamd -->
    <exclude-profiles></exclude-profiles> <!-- never send to anyone in these profiles -->
    <!-- if the user is an admin and flagged "warning"-transaction occurs for him, send notification -->
    <msg-trigger match-warnings="true" admin-only="true" cws-owner-only="true">
    <msg format="TR warning: {0}"/>
    </msg-trigger>
    <!-- format masks
    {0} full preformatted text (similar to whats shown in the status web for cws events and tr warnings)
    {1} name (user, connector or proxy name depending on the type of event matched)
    {2} profile name
    {3} service name and sid (if an ecm transaction was matched, otherwise blank)
    {4} formatted time of the event/transaction
    {5} just the event text (e.g "disconnected" for cws event or "service name - time - flags" for ecm tr)
    -->
    <!-- if a user zaps to sid 04f2 in profile profileX, send immediate msg with the channel name -->
    <msg-trigger match-flags="F" match-sids="04f2" match-profiles="VIA">
    <msg format="You zapped to: {3}"/>
    </msg-trigger>
    <!-- if a cws connect failure or invalid card event occurs, send notification to the cws owner user -->
    <msg-trigger match-events="4 8" cws-owner-only="true">
    <msg format="CWS Event: {0}"/>
    </msg-trigger>
    <!-- CWS Events
    2 = Successfully connected
    3 = Disconnected
    4 = Connection attempt failed
    5 = Warning (timeout)
    6 = Lost service
    8 = Invalid card data (on connect)
    10 = Proxy node startup notification
    -->
    <!-- if a user zaps to a blocked or unavailable service, tell them so -->
    <msg-trigger match-flags="Z N">
    <msg format="Service '{3}' is not available"/>
    </msg-trigger>
    <!-- if these cws events occur, notify the user 'adminuser' -->
    <msg-trigger match-events="4 6 8">
    <msg format="CWS Event: {0}" target="adminuser"/>
    </msg-trigger>
    <!-- every time 'someuser' zaps in profile profileX, send him the msg -->
    <msg-trigger match-flags="Z" match-profiles="CEU" match-usernames="calhordas">
    <msg format="Por favor verifique seu email!"/>
    </msg-trigger>
    <!-- fetch additional message triggers from an external file -->
    <external-msg-triggers enabled="true">
    <trigger-file-url>http://192.168.0.5/triggers.xml</trigger-file-url>
    <trigger-file-key>asdf22</trigger-file-key> <!-- optional, remove if there is no encryption -->
    <update-interval>5</update-interval> <!-- minutes, 0 for only manual updates -->
    </external-msg-triggers>
    </auto-mgcamd-osd>

    <email enabled="true"> <!-- this requires javamail: mail.jar placed in lib -->
    <smtp-server>localhost</smtp-server>
    <smtp-port>25</smtp-port>
    <sender-address>proxy@host.com</sender-address> <!-- reply to -->
    <mail-footer>--=--------[ user: {0} ] ------=------ [ CSP: {1} ] --------------------------=--</mail-footer>
    <!-- format masks: {0} = target username, {1} = CSP version -->


    <auto-email min-interval="600" enabled="true"> <!-- max one mail per 10 mins and user -->
    <msg-trigger match-events="4 8" cws-owner-only="true">
    <msg format="CWS Event: {0}"/> <!-- mail the cws owner user when the connector wont connect -->
    </msg-trigger>
    <msg-trigger match-events="4 8">
    <msg format="CWS Event: {0}" target="admin@email.com"/> <!-- mail this address when any connector wont connect -->
    </msg-trigger>
    <msg-trigger match-events="4 6 8">
    <msg format="CWS Event: {0}" target="someuser"/> <!-- mail this user when any connector wont connect or a servic -->
    </msg-trigger>
    </auto-email>
    </email>
    <!-- javamail download @ JavaMail API -->
    </plugin-config>
    </plugin>



    </proxy-plugins>

    <cache-handler class="com.bowman.cardserv.ClusteredCache">

    <cache-config>
    <cw-max-age>17</cw-max-age>
    <max-cache-wait>2500 ms</max-cache-wait>
    <tracker-url></tracker-url>
    <local-port>54210</local-port>
    <local-host></local-host>
    <tracker-key></tracker-key>
    <enable-service-linking>true</enable-service-linking>
    <tracker-update>1</tracker-update>
    <sync-period>0</sync-period>
    <hide-names>true</hide-names>
    <debug>false</debug>
    </cache-config>


    </cache-handler>


    </cardserv-proxy>

    Quite a lengthy post, but you haven't made an introduction post, please can you do so - Introductions


    I am not obligated, or connected to any particular brand, seller or retailer so any opinions given are not biased in anyway.
    Any information given is for hobby and research purposes only, and whilst every effort is made to ensure that all my responses are accurate, - Any action you may take based on my replies is done so at your own risk.
    Viewing Premium Channels or Media, without paying for them is illegal and if you do so, you do so at your own risk!

    BpGgW.jpg



Other Not Listed Softcam Support Forum

Configs, discussion, downloads and guides for Other Not Listed Softcams - CSP, DreamOS, GBox, NEWCamd, MultiCS, OSCam Smod, OSCam Ymod, SUpcam & Wicardd.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login