Hi all,
I have kindly been give test Cline which I have entered into cc cam.cfg, however when checking the connection with cccaminfophp is say the server is off line, and ideas whats wrong please
Help with cccam
-
- Various Support
- jimc
- Thread is marked as Resolved.
-
-
have you put the line in correct Jim,if so try restarting your cam or reboot the box
-
Stupid Q first!
Have you your box connected to the net with an ethernet lead/wi-fi bridge?
(Had to ask but i know well you do!)
The more obvious solution is that the kind fellow who gave you the cline, his server could be offline!
If your sure it is correctly entered, that could be the answer!
-
Display More
Stupid Q first!
Have you your box connected to the net with an ethernet lead/wi-fi bridge?
(Had to ask but i know well you do!)
The more obvious solution is that the kind fellow who gave you the cline, his server could be offline!
If your sure it is correctly entered, that could be the answer!
Everything good this side,have just checked on another box and connects straight away.Make sure the lines in correct Jim ie the C must be a capital and after each part of a line leave a space. ie C: me.playthegame.org 12000 test1 test1.thats it
-
Checked cline ok, reboot dreambox and restarted cam and still the same
-
Make sure cccam is selected as the default cam and running, blue select cccam then ok to start.
There may be a fault in your cfg. Can you post it here, ( without passwords and port numbers obviously ) so we can see if there are any errors.
-
Jim just a quick question.I've just red another one of your threads and can you confirm the dish your using is pointing at 28.2E as i notice you mention 13E and 19.2E on a monobloc.If it isn't mate this wont work
-
Jim just a quick question.I've just red another one of your threads and can you confirm the dish your using is pointing at 28.2E as i notice you mention 13E and 19.2E on a monobloc.If it isn't mate this wont work
Should say its connected anyways mate, you know...He's got sky uk so i assume he's got one for 28 east too...
-
yes I have 2 dishes will try a and post cccam.cfg
-
C: abcd.dyndns.tv 12000 abc 12345 no { 0:0:3 }
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : dreambox
WEBINFO PASSWORD : 123456
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : pass
TELNETINFO LISTEN PORT : 16
WEBINFO LISTEN PORT : 16
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#NEWCAMD STEALTH : 0
#MINIMUM DOWNHOPS: 2 -
no { 0:0:3 }
remove that for a start Jim and see if it works.I'll be back in an hour -
Display More
C: abcd.dyndns.tv 12000 abc 12345 no { 0:0:3 }
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : dreambox
WEBINFO PASSWORD : 123456
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : pass
TELNETINFO LISTEN PORT : 16
WEBINFO LISTEN PORT : 16
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#NEWCAMD STEALTH : 0
#MINIMUM DOWNHOPS: 2
Hi Jim, only a quick thought, What software package did you use to edit the config? If it was a DOS based package like "Notepad" then as an example, line 1 would look like this when using the Dreambox unix editor Vi.
C: abcd.dyndns.tv 12000 abc 12345 no { 0:0:3 }^MIt could be this 'Control M' (^M) at the end of the line that is causing the problem. The ^M does not show when viewing as HTML.
Madasafish
-
You have a pm mate, a line for you to have to play round with today.
-
What cccam version have you installed ??
-
You have a pm mate, a line for you to have to play round with today.:caked: Just checked...PM not there yet.
-
You appear to be there now Jim.
not sure what was wrong but let me know how it goes -
Got it working now, thank everyone for your patience and help
Jim -
:caked: Just checked...PM not there yet.
I ment jimc buddy
CCcam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
