I have a c line that i converted so i can use oscam but the problem is that it is only working with s*y uk, when used with CCcam all other satellites are working as well but when oscam activated only UK anybody tell me where i am going wrong
All cards not clearing
-
- Videoguard2 Cards OSCam
- franky4finga
- Thread is marked as Resolved.
-
-
we need a crystal ball
-
If you don't post your config, there isn't much we can do.
post your config, removing all the sensitive stuff, just replace the sensitive stuff like dns addresses and usernames and passwords with a load of ********
Unfortunately at this moment I have the same issue as Ferdi, My crystal ball is currently at the repair shop being fixed :haha:
-
The c line i have has both S*y UK and Italia cards how do i activate oscam so that it reads both. I downloaded oscam from ts panel from linux support server. I used cccam to oscam convertor to make oscam.server file but as i said only UK channels clearing
-
If you don't post at least the oscam.server configs, we can't help you.
There at that many variables that could be causing the issue.
Nano
-
oscam.server
[reader]
label=t1
enable=1
protocol=cccam
device=franky4finga,7002
user=turner
password= chiller
cccwantemu=1
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=1
cccwantemu=1
ccckeepalive=1 -
mate in oscam you would add liek caids like 0963 and 096c etc
also if you was given a cline and your trying to add to oscam, are you trying to reshare someones line?????? with them knowing?
-
Where do i add caids and no i am not trying to reshare just want to know why i can only watch UK
-
just add caid = 0963 to ur .server and mke sure ur device name is right, i though dyndns servers all end with a .org or .tv etc, maybe u jst didnt post it all
-
do i add 09cd as well for italia and if so how should it be done ie caid=0963,09cd or do i put two separate lines
-
do i add 09cd as well for italia and if so how should it be done ie caid=0963,09cd or do i put two separate lines
in oscam reader add dis in cccversion add ur friend cline cccam version[reader]
label = from_server_1
protocol = cccam
device = clinedns,port
user = turner
password = chiller
caid = 0963,09cd
group = 2
cccversion = 2.1.2
cccmaxhops = 2in oscam config add dis
here i mention ur nline ports are example 1111 and 1112[global]
logfile = stdout
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1[monitor]
hideclient_to = 15
appendchaninfo = 0[newcamd]
port = 1111@0963:000000;1112@09CD:000000
key = 0102030405060708091011121314[webif]
httpport = 11245
httpuser = root
httppwd = password
httpallowed = 0.0.0.0-255.255.255.255now in user account add like dis
[account]
user = slyuk99
pwd = 1account1
group = 2
monlevel = 4
ident = 0963:000000
failban = 1[account]
user = slyita88
pwd = account1
group = 2
monlevel = 4
ident = 09CD:000000
failban = 1here is your two nline which u use for watch channel
N: yourdns 1111 slyuk99 1account1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: yourdns 1112 slyita88 account1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
enjoy :)
-
master G
Set the Label from UK OSCam to Videoguard2 Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!