JCS card not working with Ubuntu server

There are 15 replies in this Thread which was already clicked 1,935 times. The last Post () by Iame.

  • Hi,


    JCS Card I***** is not working un OScam these are my configurations


    Oscam.conf


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1
    ClientTimeout = 5
    CacheDelay = 120


    [newcamd]
    Key = 0102030405060708091011121314
    Port = 10000@0603:000000;
    keepalive = 1


    Oscam.server


    [reader]
    label = JSC
    Protocol = pcsc
    detect = CD
    device = 0
    force_i***** = 1
    Group = 1
    EMMCache = 1,3,2
    mhz = 600
    cardmhz = 600
    caid = 0603
    ident = 0603:000000
    camkey = 0000000000000000
    camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000


    Oscam.user


    [account]
    user = user
    pwd = pass
    group = 1
    caid = 0603
    AU = JSC
    ident = 0603:000000



    anyone help ???

  • y ***it
    22:11:32 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:32 25DECF0 c (09CD&000000/0000/3427/B7:C74B): not found (93 ms) by ***it
    22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:36 25DECF0 c (09CD&000000/0000/38E0/B7:2DA4): not found (96 ms) by ***it
    22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:36 25DECF0 c (09CD&000000/0000/2AA8/B7:13A6): not found (94 ms) by ***it

  • where are located the logs ? Thanks


    LOL -




    logfile = /var/log/oscam.log



    above worked for me !:beat_brick:



    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • sry got confused
    I set up this server recently


    and I have JCS + *** it


    JCS never working in this server while *** it works ok but high ms :(



    22:51:49 194D410 c (0603&000000/0001/20F8/3C:3FEC): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0004/20F8/3C:F057): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0007/20F8/3C:B14B): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/000A/20F8/3C:914D): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0011/20F8/3C:48E2): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:50 194D410 c (0603&000000/006F/20F8/3C:B13B): rejected group (120 ms) (0/0/0/0) (no matching reader)



  • do you have more cards on this server ?

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • sry got confused
    I set up this server recently


    You have another server ? which cards config are you using with it ?:present:

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • config are as follows


    oscam config


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1
    ClientTimeout = 5
    CacheDelay = 120


    [newcamd]
    Key = 0102030405060708091011121314
    Port = 10000@0603:000000;10001@09cd:000000
    keepalive = 1


    [webif]
    httpport = 16002
    httpuser = 1
    httppwd = 2
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    httphideidleclients = 1
    httpreadonly = 0


    logfile = /var/log/oscam.log


    Oscam.server


    [reader]
    label = JSC
    Protocol = pcsc
    detect = CD
    device = 0
    force_i***** = 1
    Group = 1
    EMMCache = 1,3,2
    mhz = 600
    cardmhz = 600
    caid = 0603
    ident = 0603:000000
    camkey = 0000000000000000
    camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000


    [reader]
    label = ***IT
    Protocol = pcsc
    detect = CD
    device = 1
    Group = 2
    mhz = 357
    EMMCache = 1,3,2
    BoxID = 28570834142
    caid = 09cd
    ident = 09cd:000000
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    blockemm-unknown = 1
    blockemm-bylen = 183,81
    ecmwhitelist = 09cd@000000: B7,51
    AUdisabled = 1


    Oscam.User


    [account]
    user = 1
    pwd = 2
    group = 1
    caid = 0603
    AU = JSC
    ident = 0603:000000


    [account]
    user = 1
    pwd = 2
    group = 2
    caid = 09cd

  • 10E8290 c (0603&000000/0001/20F7/3C:B0B2): rejected group (120 ms) (0/0/0/0) (no matching reader)maltajcs (0603&000000/0001/20F7/3C:B0B2): rejected group (120 ms) (0/0/0/0) (no matching reader)

  • i dont have that card so not a wise person but the config I have seeen has
    ecmwhitelist = 0603@000000:34
    in reader
    Also the camkey data has different no of zeros/saces. No Idea whether that is of sinificance but ecmwhitelist may be and you should look in wiki for latest one


    justone more question for the more experienced.. does omnikey support i***** cards ??
    This is aquote from another site


    This card systems work 100% info, tested by me:
    - Nagravision 2 and 3
    - Viaccess 3.0 and 4.0
    - NDS2 and NDS3
    - Conax (MTV Unlimited for example)
    Card systems that doesnt work -100% info, tested by me:
    - I***** 2

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!