JCS card not working with Ubuntu server

There are 15 replies in this Thread which was already clicked 957 times. The last Post () by Iame.

  • Hi,


    JCS Card I***** is not working un OScam these are my configurations


    Oscam.conf


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1
    ClientTimeout = 5
    CacheDelay = 120


    [newcamd]
    Key = 0102030405060708091011121314
    Port = 10000@0603:000000;
    keepalive = 1


    Oscam.server


    [reader]
    label = JSC
    Protocol = pcsc
    detect = CD
    device = 0
    force_i***** = 1
    Group = 1
    EMMCache = 1,3,2
    mhz = 600
    cardmhz = 600
    caid = 0603
    ident = 0603:000000
    camkey = 0000000000000000
    camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000


    Oscam.user


    [account]
    user = user
    pwd = pass
    group = 1
    caid = 0603
    AU = JSC
    ident = 0603:000000



    anyone help ???

  • y ***it
    22:11:32 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:32 25DECF0 c (09CD&000000/0000/3427/B7:C74B): not found (93 ms) by ***it
    22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:36 25DECF0 c (09CD&000000/0000/38E0/B7:2DA4): not found (96 ms) by ***it
    22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    22:11:36 25DECF0 c (09CD&000000/0000/2AA8/B7:13A6): not found (94 ms) by ***it

  • where are located the logs ? Thanks


    LOL -




    logfile = /var/log/oscam.log



    above worked for me !:beat_brick:



    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • sry got confused
    I set up this server recently


    and I have JCS + *** it


    JCS never working in this server while *** it works ok but high ms :(



    22:51:49 194D410 c (0603&000000/0001/20F8/3C:3FEC): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0004/20F8/3C:F057): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0007/20F8/3C:B14B): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/000A/20F8/3C:914D): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:49 194D410 c (0603&000000/0011/20F8/3C:48E2): rejected group (120 ms) (0/0/0/0) (no matching reader)
    22:51:50 194D410 c (0603&000000/006F/20F8/3C:B13B): rejected group (120 ms) (0/0/0/0) (no matching reader)



  • do you have more cards on this server ?

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • sry got confused
    I set up this server recently


    You have another server ? which cards config are you using with it ?:present:

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

  • config are as follows


    oscam config


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1
    ClientTimeout = 5
    CacheDelay = 120


    [newcamd]
    Key = 0102030405060708091011121314
    Port = 10000@0603:000000;10001@09cd:000000
    keepalive = 1


    [webif]
    httpport = 16002
    httpuser = 1
    httppwd = 2
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    httphideidleclients = 1
    httpreadonly = 0


    logfile = /var/log/oscam.log


    Oscam.server


    [reader]
    label = JSC
    Protocol = pcsc
    detect = CD
    device = 0
    force_i***** = 1
    Group = 1
    EMMCache = 1,3,2
    mhz = 600
    cardmhz = 600
    caid = 0603
    ident = 0603:000000
    camkey = 0000000000000000
    camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000


    [reader]
    label = ***IT
    Protocol = pcsc
    detect = CD
    device = 1
    Group = 2
    mhz = 357
    EMMCache = 1,3,2
    BoxID = 28570834142
    caid = 09cd
    ident = 09cd:000000
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    blockemm-unknown = 1
    blockemm-bylen = 183,81
    ecmwhitelist = 09cd@000000: B7,51
    AUdisabled = 1


    Oscam.User


    [account]
    user = 1
    pwd = 2
    group = 1
    caid = 0603
    AU = JSC
    ident = 0603:000000


    [account]
    user = 1
    pwd = 2
    group = 2
    caid = 09cd

  • 10E8290 c (0603&000000/0001/20F7/3C:B0B2): rejected group (120 ms) (0/0/0/0) (no matching reader)maltajcs (0603&000000/0001/20F7/3C:B0B2): rejected group (120 ms) (0/0/0/0) (no matching reader)

  • i dont have that card so not a wise person but the config I have seeen has
    ecmwhitelist = 0603@000000:34
    in reader
    Also the camkey data has different no of zeros/saces. No Idea whether that is of sinificance but ecmwhitelist may be and you should look in wiki for latest one


    justone more question for the more experienced.. does omnikey support i***** cards ??
    This is aquote from another site


    This card systems work 100% info, tested by me:
    - Nagravision 2 and 3
    - Viaccess 3.0 and 4.0
    - NDS2 and NDS3
    - Conax (MTV Unlimited for example)
    Card systems that doesnt work -100% info, tested by me:
    - I***** 2

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!