cant share a cline

hi i have oscam and cccam installed, i want so share a cline with my clients in cccam.cfg but it not working, do i need to add somefing to the cfg, here is my cccma cfg
SERVER LISTEN PORT : 19566

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox

NEWCAMD CONF : yes
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#MINIMUM DOWNHOPS: 1
#protocol : internal
#device : /dev/sci0
#BOXKEY: /dev/sci0
N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: 192.168.1.9 17544 test1 test1
i allowed shares from 192.168.1.9 server box to the cline but doesnt clear the channels from that server card, can u share cline using oscam/cccam
thanks

it is, i can share it to different boxes, i just cant share to my server..

thanks for the replys, i want to share my cline with the cccam cfg not the oscam reader, ok i tryed to start again, im using a dm800 as a server, it has oscam/ccam and 1 card in it, i have a dm500 so put cccam 2.13 in it and give it a cline from the dm800 c:192.168.1.9 17544 test1 test1, the dm800 f line like so F: test1 test1 3 0 1 { 0:0:3 } i even try removing the 3.0.0 still nojoy, so in the dm500 i put a Fline to share with another box 500 but wont share, the first 500 that the dm800 is sharing with works ok,i dnt no wat im doing wrong, is their a different protocol or something or is it cause im using oscam as reader and habe a Nline in cccam, do i need to do anything to the N line..

ok i just tryed this and it worked, but keep cutting off ever 20min of so n had to restart box, i put a N line in the 500 box, so made a second user in oscam and put that user n password into a Nline, the only thing i changed was the port and added httpdyndns = 192.168.1.9 but dnt even no if i have to, here is my oscam cfg i edit

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = 192.168.1.9
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 19566@0963:000000;10001@0963:000000.... put my port at start

[account]
user = test1
description = for local mgcamd or DVBAPI
pwd = test1
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

[account]
user = test2
description = for local mgcamd or DVBAPI
pwd = test2
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

i seen this in peoples oscam config dnt no if i need it.

[cccam]
port = 12000
nodeid = 71A3E54910C4154A
version = 2.0.11
so if i just forget about cccam and use oscam and make a N line, the boxs i want to share with are in my home and on same router

Ok i have tryed it every way but it wont let me reshare, ok in my pc server i have oscam and cccam, in the cccam.cfg i have this N line and it works and all my clients work.
N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
but i want to add a cline so i can share that line with my clients to, so i would have this below in my cfg

N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
c:192.168.1.9 17544 test1 test1
then all my F lines below, but the cline isnt sharing, if i goto the pc server 192.168*.*:16001 page and click on share it has
the 2 lines in their and they both have uphops and if i i click on server, both lines are in their and both have card 1 in their lines, so the server is seeing the line ok, it just wont share it can u share a NLINE and CLINE in same cfg, i no when i used cccam only as reader it worked because i give a friend a share line and he reshared with is m8s, like i said i made a Nline from the dm800 and put that into my pc server and it worked but the setup mush have been wrong because it ketp cutin off.
ok if i had oscam only in my dm800 and i wanted to give my pc server a N line how would it look, my dm800 ip is 192.168.1.9 and the pc server is 192.168.1.5, they are on same router, would it be like so.
N: 192.168.1.9 15500 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

ok thanks it is right then, il give it atry again, its just wired why the c line wont share, it must be because oscam reads the card and theirs a Nline in the cccam.cfg, il see how oscams.
thanks for the replys