Please read the rules carefully, anyone who does not follow the rules will be warned and may be banned from this forum.
Rules:
<1> An Introduction post is required before you start using the forum, requests for support without an Introduction post will be ignored.
Display Morehi ya
im in need of a little help he iv got a dublin server with OSCAM 1.20-unstable_svn build #8001 installed no problem but im having problems with the card reader side of it !!!
the card reader is OmniKey AG CardMan 3121 as the usb scan reports so its installed or looks to be but when i try setting up my reader in oscam its not passing any data from the card to the clint my own box at this point.
any how can anyone help me out here my msn or teamview as im now 100% lost
thanks
rory
Welcome to this forum Rory. However I think you need a lot of help. First go to introductions and you will then feel the welcome and get lots of help. When you need help with oscam its best to post in Oscam Support. This section is for working configs only but I sure a mod will move it anyway. You might also read the sticky about minimal info when posting .
But you have made good choices like Oscam and Omnikey.
http://linuxsat-support.com/os…when-posting-section.html
oscam global config
oscam server
oscam user
[reader]
label = reader-1
enable = 0
protocol = pcsc
device = /dev/ttyUSB0
pincode = ****
caid = 0963
boxid = 12345678
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,5F,53,54,6C,61,62,66,67, 68,69,6A,6B,6D,6F,70,71,72,73,76,77,78,79,7A,7C,7D ,7E,80,85,8B,82
ecmheaderwhitelist = 0963:3E,42,44,45,47,4E,4F,5F,53,54,6C,61,62,66,67, 68,69,6A,6B,6D,6F,70,71,72,73,76,77,78,79,7A,7C,7D ,7E,80,85,8B,82
detect = cd
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1
emmcache = 1,3,2
auprovid = 000001
i only use whitelist ¬ never seen ecmheaderwhitelist in a config before ! Try removing it !
The reader is not enabled and device = for omnikey is incorrect.
Try the config below then show us any errors from the oscam log;
[reader]
label = reader-1
enable = [COLOR='#FF0000']1[/COLOR]
protocol = pcsc
device = [COLOR='#FF0000']0[/COLOR]
caid = 0963
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,5F,53,54,6C,61,62,66,67, 68,69,6A,6B,6D,6F,70,71,72,73,76,77,78,79,7A,7C,7D ,7E,80,85,8B,82
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2Change This
ecmwhitelist = FFFF:3B;FFFF:3E;FFFF:42;FFFF:44;FFFF:45;FFFF:47;FF FF:4B;FFFF:4E;FFFF:4F;FFFF:53;FFFF:54;FFFF:56;FFFF :5F;FFFF:61;FFFF:62;FFFF:65;FFFF:66;FFFF:67;FFFF:6 8;FFFF:69;FFFF:6A;FFFF:6B;FFFF:6C;FFFF:6D;FFFF:6E; FFFF:6F;FFFF:71;FFFF:72;FFFF:73;FFFF:74;FFFF:76;FF FF:77;FFFF:78;FFFF:79;FFFF:7A;FFFF:7C;FFFF:7D;FFFF :7E;FFFF:80;FFFF:82;FFFF:85;FFFF:8B
mine is like this
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,5F,53,54,6C,61,62,66,67, 68,69,6A,6B,6D,6F,70,71,72,73,76,77,78,79,7A,7C,7D ,7E,80,85,8B,82
cs studio is probably what you need..
Don’t have an account yet? Register yourself now and be a part of our community!
