how to add c-lines with a usb stick on a DR HD
-----------------------------------
first from the receiver you need to upload the CSinfo file
on to a usb stick.first put the stick in the usb port on the
rear panel of the receiver next on the remote press the menu button,
and from the line set up icons scroll right to the usb icon and it
will change colour from blue to yellow, then you can click down to
the file list under the icon's and click>ok on the file manager bar
and a file manager panel opens on it you will see along the bottom
a button menu to upload a file you press the info button on the remote,
then a small file upload panel opens with a list of the uploads you go to
CSinfo and click>ok when the uploads compleate exit the menu's and remove
the usb stick.next you put the stick in the usb on a computer and download
the file where you can add your line or lines to the file and once everything
has been added you close the document and save it,it's now ready to go back
on the usb stick and load on the receiver the same way the patch and chn lists
are loaded.
************************************************
the line must be broken down into four sections to type on to the CSinfo document
and each sealine has to be added in it's own section.you leave the c: out when you
break the line in to four sections as in this example on how to split the line
and add to the file [[[ c:rodgerrabbit.no-ip.org *** 56000***** henry **** ad22usiv ]]]
the user can be a name or letters and numbers and the user is always after the port
with this method you must make sure the protocol is set for CCCAM or NEWCAMD if your
using a N:line.do not change any other setting and make sure you type it correct as you
got it from the server and take care over higher orlower case or both if needed the line
or lines are case sensitive finaly if you have more than one line you load them as they
were sent to you starting with the top line in top section 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++
this is a example how to split and load the line or line in the CSinfo doc that you send
to the receiver same way as the patch
++++++++++++++++++++++++++++++++++++
slot0 =
{
name: connection_0
ip:rodgerrabbit.no-ip.org
user:henry
password:ad22usiv
protocol: cccam
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
filtermode: auto
filterindex: 0
port:56000
timeout: 3
}