Hi, I have set up a debian 6 linux server with automated CCcam 2.3.0 and have added config file using CS studio. I now need to set up my smargo smart readers but don't know whether I need to install smargo drivers to get them to work. If so can anybody help me out with installing the drivers as I am finding it a bit difficult to understand the tutorials I have read, Thanks.
Do I need to install smargo drivers on debian 6 server?
- JonRDS2484
- Thread is marked as Resolved.
There are 9 replies in this Thread which was already clicked 2,452 times. The last Post () by JonRDS2484.
-
-
smargo should work fine out the box !
you'll need to do dmesg command to find correct path !
Omnikey requires special drivers if i remember correctly not smargo !
-
smargo works fine in debian no drivers needed..what card are you wanting to read as you need the correct configs putting into cccam.cfg
-
smargo should work fine out the box !
you'll need to do dmesg command to find correct path !
Omnikey requires special drivers if i remember correctly not smargo !
Thanks mate, when you do dmesg command is that to find out what USB port the smargo smart reader is in so I can put the right number in my config i.e SERIAL READER : /dev/ttyUSB0 smartreader+
Thanks for the help
-
smargo works fine in debian no drivers needed..what card are you wanting to read as you need the correct configs putting into cccam.cfg
Sly Uk, do you have a example of the correct config needed, obviously need to put my correct boxkey. This is the one I have in at the moment -
SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6860000
BOXKEY : /dev/ttyUSB0 ** ** ** **but I am not getting entitlements only -
card reader /dev/ttyUSB0
no or unknown card insertedI have tried the smargo reader in every USB port but still says the same.
Any ideas?
Thanks for you time
-
give us the output from dmesg command please
/dev/tty 001:003
the exact config setting will be in te output i'm sure
-
here is the output from dmesg command -
Code
Display More[261202.652598] usb 3-1: Number of endpoints 2 [261202.652603] usb 3-1: Endpoint 1 MaxPacketSize 64 [261202.652607] usb 3-1: Endpoint 2 MaxPacketSize 64 [261202.652612] usb 3-1: Setting MaxPacketSize 64 [261202.653459] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [261202.653610] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 [261217.145537] ftdi_sio ttyUSB0: ftdi_break_ctl FAILED to enable/disable break state (state was 0) [261217.146534] ftdi_sio ttyUSB0: urb failed to clear flow control [261217.328037] usb 3-1: USB disconnect, address 5 [261217.328267] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [261217.328295] ftdi_sio 3-1:1.0: device disconnected [261218.788014] usb 2-2: new full speed USB device using uhci_hcd and address 7 [261223.952697] usb 2-2: New USB device found, idVendor=0403, idProduct=6001 [261223.952703] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [261223.952841] usb 2-2: configuration #1 chosen from 1 choice [261223.960777] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected [261223.960830] usb 2-2: Detected FT232BM [261223.960835] usb 2-2: Number of endpoints 2 [261223.960840] usb 2-2: Endpoint 1 MaxPacketSize 64 [261223.960844] usb 2-2: Endpoint 2 MaxPacketSize 64 [261223.960849] usb 2-2: Setting MaxPacketSize 64 [261223.961701] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [261223.961850] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0 [261241.136039] usb 2-2: USB disconnect, address 7 [261241.136270] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [261241.136298] ftdi_sio 2-2:1.0: device disconnected [261244.728014] usb 2-1: new full speed USB device using uhci_hcd and address 8 [261249.892697] usb 2-1: New USB device found, idVendor=0403, idProduct=6001 [261249.892703] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [261249.892842] usb 2-1: configuration #1 chosen from 1 choice [261249.900777] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected [261249.900830] usb 2-1: Detected FT232BM [261249.900835] usb 2-1: Number of endpoints 2 [261249.900840] usb 2-1: Endpoint 1 MaxPacketSize 64 [261249.900844] usb 2-1: Endpoint 2 MaxPacketSize 64 [261249.900849] usb 2-1: Setting MaxPacketSize 64 [261249.901699] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [261249.901844] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 [261268.912037] usb 2-1: USB disconnect, address 8 [261268.912269] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [261268.912297] ftdi_sio 2-1:1.0: device disconnected [261269.096014] ------------[ cut here ]------------ [261269.096034] WARNING: at /build/buildd-linux-2.6_2.6.32-46-i386-7ZiQaK/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/usb/serial/usb-serial.c:485 serial_break+0x47/0x62 [usbserial]() [261269.096040] Hardware name: Dimension 5000 [261269.096043] Modules linked in: usbhid hid speedstep_lib cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats ppdev lp sco bridge stp bnep rfcomm l2cap crc16 bluetooth rfkill binfmt_misc fuse loop snd_ca0106 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ac97_codec ac97_bus snd_pcm snd_seq snd_timer snd_seq_device snd soundcore i915 drm_kms_helper ftdi_sio snd_page_alloc usbserial dcdbas evdev psmouse drm i2c_algo_bit parport_pc video i2c_i801 i2c_core pcspkr rng_core parport output button processor serio_raw ext3 jbd mbcache sg sr_mod b44 cdrom sd_mod crc_t10dif ssb ata_generic mmc_core uhci_hcd ata_piix pcmcia libata pcmcia_core mii thermal thermal_sys ehci_hcd scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] [261269.096130] Pid: 16312, comm: CCcam.x86 Tainted: G W 2.6.32-5-686 #1 [261269.096134] Call Trace: [261269.096144] [<c1030949>] ? warn_slowpath_common+0x5e/0x8a [261269.096149] [<c103097f>] ? warn_slowpath_null+0xa/0xc [261269.096158] [<f81d844d>] ? serial_break+0x47/0x62 [usbserial] [261269.096164] [<c118fae3>] ? send_break+0x65/0x88 [261269.096169] [<c11903b6>] ? tty_ioctl+0x71d/0x8b1 [261269.096178] [<f81d8653>] ? serial_write+0x72/0x7d [usbserial] [261269.096184] [<c118fc99>] ? tty_ioctl+0x0/0x8b1 [261269.096191] [<c10be1dc>] ? vfs_ioctl+0x1c/0x5f [261269.096196] [<c10be770>] ? do_vfs_ioctl+0x4aa/0x4e5 [261269.096202] [<c10b35a6>] ? fsnotify_modify+0x5a/0x61 [261269.096207] [<c118f851>] ? tty_write+0x0/0x1c0 [261269.096211] [<c10b4184>] ? vfs_write+0x9e/0xd6 [261269.096216] [<c10be7ec>] ? sys_ioctl+0x41/0x58 [261269.096222] [<c10030fb>] ? sysenter_do_call+0x12/0x28 [261269.096226] ---[ end trace 00c6e6ffdb8d9f56 ]--- [261269.096232] usb-serial ttyUSB0: ftdi_break_ctl FAILED to enable/disable break state (state was 0) [261272.040018] usb 4-2: new full speed USB device using uhci_hcd and address 7 [261277.204695] usb 4-2: New USB device found, idVendor=0403, idProduct=6001 [261277.204700] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [261277.204836] usb 4-2: configuration #1 chosen from 1 choice [261277.212777] ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected [261277.212830] usb 4-2: Detected FT232BM [261277.212835] usb 4-2: Number of endpoints 2 [261277.212840] usb 4-2: Endpoint 1 MaxPacketSize 64 [261277.212844] usb 4-2: Endpoint 2 MaxPacketSize 64 [261277.212849] usb 4-2: Setting MaxPacketSize 64 [261277.213697] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [261277.213846] usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB0 [261296.688039] usb 4-2: USB disconnect, address 7 [261296.688273] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [261296.688301] ftdi_sio 4-2:1.0: device disconnected [261298.416014] usb 4-1: new full speed USB device using uhci_hcd and address 8 [261298.576343] usb 4-1: New USB device found, idVendor=0403, idProduct=6001 [261298.576348] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [261298.576487] usb 4-1: configuration #1 chosen from 1 choice [261298.584424] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected [261298.584477] usb 4-1: Detected FT232BM [261298.584483] usb 4-1: Number of endpoints 2 [261298.584487] usb 4-1: Endpoint 1 MaxPacketSize 64 [261298.584492] usb 4-1: Endpoint 2 MaxPacketSize 64 [261298.584496] usb 4-1: Setting MaxPacketSize 64 [261298.585348] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [261298.585501] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0 [261633.472037] usb 4-1: USB disconnect, address 8 [261633.472264] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [261633.472292] ftdi_sio 4-1:1.0: device disconnected [261633.484028] ------------[ cut here ]------------ [261633.484049] WARNING: at /build/buildd-linux-2.6_2.6.32-46-i386-7ZiQaK/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/usb/serial/usb-serial.c:485 serial_break+0x47/0x62 [usbserial]() [261633.484054] Hardware name: Dimension 5000 [261633.484057] Modules linked in: usbhid hid speedstep_lib cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats ppdev lp sco bridge stp bnep rfcomm l2cap crc16 bluetooth rfkill binfmt_misc fuse loop snd_ca0106 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ac97_codec ac97_bus snd_pcm snd_seq snd_timer snd_seq_device snd soundcore i915 drm_kms_helper ftdi_sio snd_page_alloc usbserial dcdbas evdev psmouse drm i2c_algo_bit parport_pc video i2c_i801 i2c_core pcspkr rng_core parport output button processor serio_raw ext3 jbd mbcache sg sr_mod b44 cdrom sd_mod crc_t10dif ssb ata_generic mmc_core uhci_hcd ata_piix pcmcia libata pcmcia_core mii thermal thermal_sys ehci_hcd scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] [261633.484144] Pid: 16316, comm: CCcam.x86 Tainted: G W 2.6.32-5-686 #1 [261633.484147] Call Trace: [261633.484157] [<c1030949>] ? warn_slowpath_common+0x5e/0x8a [261633.484163] [<c103097f>] ? warn_slowpath_null+0xa/0xc [261633.484171] [<f81d844d>] ? serial_break+0x47/0x62 [usbserial] [261633.484177] [<c118fae3>] ? send_break+0x65/0x88 [261633.484182] [<c11903b6>] ? tty_ioctl+0x71d/0x8b1 [261633.484190] [<f81d8653>] ? serial_write+0x72/0x7d [usbserial] [261633.484195] [<c118fc99>] ? tty_ioctl+0x0/0x8b1 [261633.484201] [<c10be1dc>] ? vfs_ioctl+0x1c/0x5f [261633.484206] [<c10be770>] ? do_vfs_ioctl+0x4aa/0x4e5 [261633.484212] [<c10b35a6>] ? fsnotify_modify+0x5a/0x61 [261633.484217] [<c118f851>] ? tty_write+0x0/0x1c0 [261633.484221] [<c10b4184>] ? vfs_write+0x9e/0xd6 [261633.484226] [<c10be7ec>] ? sys_ioctl+0x41/0x58 [261633.484232] [<c10030fb>] ? sysenter_do_call+0x12/0x28 [261633.484236] ---[ end trace 00c6e6ffdb8d9f57 ]--- [261633.484245] usb-serial ttyUSB0: ftdi_break_ctl FAILED to enable/disable break state (state was 0) [275490.612014] usb 5-2: new full speed USB device using uhci_hcd and address 10 [275495.776693] usb 5-2: New USB device found, idVendor=0403, idProduct=6001 [275495.776699] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [275495.776835] usb 5-2: configuration #1 chosen from 1 choice [275495.784775] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected [275495.784827] usb 5-2: Detected FT232BM [275495.784832] usb 5-2: Number of endpoints 2 [275495.784837] usb 5-2: Endpoint 1 MaxPacketSize 64 [275495.784841] usb 5-2: Endpoint 2 MaxPacketSize 64 [275495.784845] usb 5-2: Setting MaxPacketSize 64 [275495.785697] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [275495.785839] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0 [275535.112038] usb 5-2: USB disconnect, address 10 [275535.112266] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [275535.112293] ftdi_sio 5-2:1.0: device disconnected [285917.464016] usb 5-2: new full speed USB device using uhci_hcd and address 11 [285922.628696] usb 5-2: New USB device found, idVendor=0403, idProduct=6001 [285922.628702] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [285922.628839] usb 5-2: configuration #1 chosen from 1 choice [285922.636774] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected [285922.636826] usb 5-2: Detected FT232BM [285922.636832] usb 5-2: Number of endpoints 2 [285922.636837] usb 5-2: Endpoint 1 MaxPacketSize 64 [285922.636843] usb 5-2: Endpoint 2 MaxPacketSize 64 [285922.636847] usb 5-2: Setting MaxPacketSize 64 [285922.637698] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [285922.637845] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0 [285929.288037] usb 5-2: USB disconnect, address 11 [285929.288280] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [285929.288307] ftdi_sio 5-2:1.0: device disconnected [285931.220015] usb 5-1: new full speed USB device using uhci_hcd and address 12 [285931.380223] usb 5-1: New USB device found, idVendor=0403, idProduct=6001 [285931.380229] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [285931.380363] usb 5-1: configuration #1 chosen from 1 choice [285931.388302] ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected [285931.388353] usb 5-1: Detected FT232BM [285931.388358] usb 5-1: Number of endpoints 2 [285931.388362] usb 5-1: Endpoint 1 MaxPacketSize 64 [285931.388367] usb 5-1: Endpoint 2 MaxPacketSize 64 [285931.388371] usb 5-1: Setting MaxPacketSize 64 [285931.389225] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [285931.389372] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0 [285947.542197] ftdi_sio ttyUSB0: error from flowcontrol urb [285947.640040] usb 5-1: USB disconnect, address 12 [285947.640257] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [285947.640290] ftdi_sio 5-1:1.0: device disconnected [285949.120013] usb 5-2: new full speed USB device using uhci_hcd and address 13 [285949.280090] usb 5-2: New USB device found, idVendor=0403, idProduct=6001 [285949.280094] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [285949.280229] usb 5-2: configuration #1 chosen from 1 choice [285949.288169] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected [285949.288220] usb 5-2: Detected FT232BM [285949.288226] usb 5-2: Number of endpoints 2 [285949.288230] usb 5-2: Endpoint 1 MaxPacketSize 64 [285949.288235] usb 5-2: Endpoint 2 MaxPacketSize 64 [285949.288239] usb 5-2: Setting MaxPacketSize 64 [285949.289094] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [285949.289241] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB -
are you using a USB hub mate _ I cant see what i think should be the address ! Anyone else see it
-
you might need to disable the brltty package
-
you might need to disable the brltty package
No, I'm not using USB hub. Smargo readers go directlyin USB ports on tower mate. How would I go about disabling britty package? Sorry, I'm a total newb when it comes to debian 6
Your resource for Linux TV servers and smart card readers.
Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
