remote reader = no matching reader

**bady** · Mar 1st 2013

hi dudes :D, i have a litle problem:

i have my local conax card on a debian using pcsc, lets call it OSCAM A, and i have an oscam B as remote server, here my config:

OSCAM A (local)
oscam.conf

Code

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8327
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt




[global]
serverip                      = 192.168.1.111
logfile                       = /home/oscam.log
fallbacktimeout               = 2900
cachedelay                    = 50
nice                          = -1
maxlogsize                    = 1000
usrfile                       = /home/oscamuser.log
cwlogdir                      = /home/cw
max_cache_time                = 10
max_cache_count               = 5000




[newcamd]
port                          = 10000@0B00:000000
serverip                      = 192.168.1.111
allowed                       = 0.0.0.0-255.255.255.255
key                           = 0102030405060708091011121314
keepalive                     = 1




[webif]
httpport                      = 5000
httpuser                      = webuser
httppwd                       = webpass
httpallowed                   = 0.0.0.0-255.0.0.0

Display More

oscam.server

Code

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8327
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt




[reader]
label                         = local
protocol                      = pcsc
device                        = 0
caid                          = 0B00
detect                        = cd
ident                         = 0B00:000000
group                         = 1
emmcache                      = 1,3,15
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1

Display More

oscam.user

Code

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8327
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt




[account]
user                          = local
pwd                           = local
caid                          = 0B00
group                         = 1
ident                         = 0B00:000000
cccreshare                    = 10
cccignorereshare              = 1

Display More

my oscam B (remote)

Code

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8350
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt




[global]
serverip                      = 200.*.*.* 
logfile                       = /home/oscam.log
fallbacktimeout               = 2900
clientmaxidle                 = 300
sleep                         = 300
nice                          = -1
maxlogsize                    = 1000
dropdups                      = 1
usrfile                       = /home/oscamuser.log
cwlogdir                      = /home/cw
failbantime                   = 30
failbancount                  = 2
max_cache_time                = 10
max_cache_count               = 500




[newcamd]
port                          = 40000@0B00:000000
serverip                      = 200.*.*.*
allowed                       = 0.0.0.0-255.255.255.255
key                           = 0102030405060708091011121314
keepalive                     = 1




[cccam]
port                          = 12000
nodeid                        = D84B2FD610D0153C
version                       = 2.0.11




[webif]
httpport                      = 6000
httpuser                      = WebRemoteUser
httppwd                       = WebRemotePass
httpallowed                   = 0.0.0.1-255.0.0.0

Display More

oscam.server

Code

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8350
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt




[reader]
label                         = remote
protocol                      = newcamd
device                        = *.dyndns.tv,10000
key                           = 0102030405060708091011121314
user                          = local
password                      = local
disableserverfilter           = 1
connectoninit                 = 1
caid                          = 0B00
ident                         = 0B00:000000
group                         = 1

Display More

oscam.user

Code

[account]
user                          = UserOscamB
pwd                           = PassOscamB
caid                          = 0B00
group                         = 1
ident                         = 0B00:000000

if i conect to my local (oscam a) using the "local" user it works PERFECT!, but if i conect to remote oscam (oscam B), using UserOscamB it shows

Code

UserOscamB (0B00&000000/0000/000D/47:EE6ED32A3C88776719FE5BF39E804B2B): rejected group (0 ms) (0/0/0/0) (no matching reader)

besides, the remote server (oscam B) conects OK to oscam A (local)

Code

2013/03/01 01:43:04   D10A60 p proxy *.dyndns.tv:10000 newcamd525 (fd=0)
2013/03/01 01:43:04        0 s waiting for local card init
2013/03/01 01:43:04   D10A60 p *.dyndns.tv: resolved ip=200.*.*.*
2013/03/01 01:43:04   D10A60 p local [newcamd] connecting to *.dyndns.tv:10000
2013/03/01 01:43:04        0 s init for all local cards done
2013/03/01 01:43:04        0 s anti cascading disabled
2013/03/01 01:43:04   D10A60 p Newcamd Server: *.dyndns.tv:10000 - UserID: 11
2013/03/01 01:43:04   D10A60 p CAID: 0B00 - UA: 0000000000000000 - Provider # 1
2013/03/01 01:43:04   D10A60 p Provider ID: 000000 - SA: 00000000
2013/03/01 01:43:04   D10A60 p local [newcamd] proxy initialized, server *.dyndns.tv:10000

what is the problem?, any help??

thx!

**bady** · Mar 1st 2013

today i try new thinks but nothing yet, OSCAM A (local) works fine, the problem is on oscam B (remote), oscam B shows rejected group (0 ms) (0/0/0/0) (no matching reader) and doesnt make the petition to oscam A, so oscam A doesnt show any log, cause the problem probably is on oscam B, oscam B doesnt make petitions to reader on oscam A

**musogeek** · Mar 1st 2013

So to get this right - you are sending your local card to remote server (vps?) and you are trying to connect to UserOscamB account you set up on Oscam B (remote server) - You have set up port 40000 for the newcamd and 12000 for CCcam protocol on the remote server. You need to have these ports open on your remote server to connect to to these ports from outside so I assume you have done this?

**bady** · Mar 2nd 2013

Quote from musogeek

So to get this right - you are sending your local card to remote server (vps?) and you are trying to connect to UserOscamB account you set up on Oscam B (remote server) - You have set up port 40000 for the newcamd and 12000 for CCcam protocol on the remote server. You need to have these ports open on your remote server to connect to to these ports from outside so I assume you have done this?

exactly!!!, vps with all ports open, local server too, but i dont understand one thing, why use CCcam??, i see a config like that in this forum, but i dont understand why newcamd and CCcam must be enabled on remote (well, newcamd obviously, but why cccam?)

thx

**musogeek** · Mar 2nd 2013

of course the CCcam part doesn't need to be set in oscam.conf if you only need newcamd. however, if you want peers to connect to your remote server with clines once up and running, you will need to keep it, which is why I imagine it is part of the configs you have seen.

For starters you could try deleting

Code

cccreshare                    = 10
cccignorereshare              = 1

from the user account in Oscam A - these settings are for CCcam only - not newcamd

if this doesn't work;
in oscam b oscam.server

Code

disableserverfilter           = 1
connectoninit                 = 1

try without the above as well as these are new options so might not function fully or be needed.

**ddvdman** · Nov 12th 2013

i having the same problam no matching reader on vps side

**ddvdman** · Nov 13th 2013

FIXED

ADD this to your [global]

[global]
block_same_ip = 0
block_same_name = 0

davequattro · Dec 6th 2013

Quote from ddvdman

FIXED

ADD this to your [global]

[global]
block_same_ip = 0
block_same_name = 0

Thanks, i was looking for this

pakmafia · Mar 20th 2014

Quote from davequattro

Thanks, i was looking for this

exactly which file do you add these lines to and is it added on server or the client side?

davequattro · Apr 9th 2014

When you go in the webif to Config you will see ''simple block"' there you can click it on or off, you click off restart oscam and it will work

**Searay** · May 23rd 2014

Well it's nice there is a solution to that particular problem, because I have completely the same.
I play with when I get home, but is not what it is for, OscamA or OscamB

[global]
block_same_ip = 0
block_same_name = 0

Must be copied in?

**Searay** · May 26th 2014

Quote from ddvdman

FIXED

ADD this to your [global]

[global]
block_same_ip = 0
block_same_name = 0

Tried and it worked immediately. Thank you, but is there someone who can explain what is happening with Oscam when it works locally?

remote reader = no matching reader

OSCam Support Forum

Participate now!

Share

Tags