NBOX PKT Oscam and CCcam question

well i must admit this has got me totally beat ,
been using dm 800s for years never had any problems like this +
ive followed the above to the letter , installed oscam 8599 chmoded the attributes , edited the oscam conf ,( changed http port to 8080)
, oscam.server and the oscam.user
to be the same as above , i get absolutley nothing , i cannot see anywhere where the server port number goes ianywhere in the oscam file above ,
any help would be appreciated ,. here are my 3 folders found in var keys (ive edited out my server id , username and password )

oscam.conf
[global]
logfile = /tmp/oscam.log
clienttimeout = 1600
fallbacktimeout = 1500
clientmaxidle = 300
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
waitforcards_extra_delay = 400
preferlocalcards = 1
dropdups = 1
cacheexwaittime = 60
usrfile = /tmp/oscam/oscamuser.log
cwlogdir = /tmp/oscam/cw
emmlogdir = /tmp/oscam/emm.log

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 8080
httpuser = root
httppwd = pkteam
httprefresh = 0
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.255
httphideidleclients = 0
httpreadonly = 0

oscam.server
[reader]
protocol = cccam
device = xxxxx.is-xxx.com
user = xxxxxx
password = xxxxxx
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1
cccreshare = 0

oscam.user

[account]
user = local
group = 1
cccstealth

rebooted box , got gsod continuously ,error was caused by oscam 8599, had to reinstall this time went for nebula v3 , downloaded oscam 3144 stable ,
enabled oscam and entered everything you wrote , i only want to connect to a friends server i dont want to serve , this is what im now getting in oscam server screen thru internet explorer
1335 l 0 root 0 0 127.0.0.1 0 logger 01.01.00 01:20:22 4856d 11:33:06 0000:0000 4856d 11:33:06 OK
1336 h 1 root 0 0 127.0.0.1 0 monitor 01.01.00 01:20:22 4856d 11:33:06 0000:0000 00:00:00 OK
1337 p 2 xxxxxxxx0 0 0.0.0.0 9001 cccam 01.01.00 01:20:22 4856d 11:33:06 0963:0EED 4856d 11:33:06 OFF
1338 c 1 local 0 0 127.0.0.1 0 dvbapi 01.01.00 01:20:22 4856d 11:33:06 0963:0EED not found 4856d 11:33:06 OK

not getting any connection at all , any help would be appreciated
thanx

2000/01/01 1:20:37 1337 p02 configuration error!
2000/01/01 1:20:37 1338 c01 local (0961&000000/0EED/67:40C1): rejected reader peer (3 ms)
2000/01/01 1:20:38 1337 p02 proxy reader: xxxxx(xxxxxxxxxx:9001) cccam v2.1.2 build 3094, maxhop: 10, retry ecm: 1, auto
2000/01/01 1:20:38 1337 p02 configuration error!
2000/01/01 1:20:38 1338 c01 local (0963&000000/0EED/67:40C1): rejected reader peer (4 ms)
2000/01/01 1:20:38 1338 c01 dvbapi: try pids again #1
2000/01/01 1:20:38 1337 p02 proxy reader: xxxxxxx(xxxxxxx:9001) cccam v2.1.2 build 3094, maxhop: 10, retry ecm: 1, auto
2000/01/01 1:20:38 1337 p02 configuration error!

the new version of oscam you sent me works , copied the 3 files over , conf, user and server restarted the cam and bang came straight on ,
i have only 1 c-line installed at the moment , would it make any difference if i generated a new oscam.server file with my whole 5x c-lines i have and insert that or would i need to change anything else in the keys folder ?
also installed mgcamd got that working straight away but read on your post ity needs to be oscam to allow recording whilst watching another programme ,

thank you for your help its much appreciated

thank you done as you suggested maxhops =2 , working great

This issue with cccam only working on one channel at a time. Is that specific to the firmware or to the box in general?

CCAM line generator for oscam

Umnie for such configurations with a generator running line cccam on oscamie7119 in my bsla without jamming so it must be a server fault

Quote from nano

What i wrote above should work fine.

Copy these ones attached to the appropriate folder in to your nbox and modify the oscam.server file with the details from your n line.

You will need winrar to decompress the file after you have downloaded it before ftping it to your box. Make sure you change the permissions/chmod on the files to 755 so they can run.

These files are taken from my nbox (with anything personal to my own box removed or altered) and they work fine so it should be the same on your box.

To access the webif for oscam on your computer use the boxes ip address and port 8080. So if your box has the IP address of 192.168.1.5 it will be 192.168.1.5:8080 to access the webif from your pc.

Nano

Display More

HI, could i ask how to find this folder on my nbox, im trying to put an nline onto it im sorry for asking as a newby but i have trawled loads of forums but am just not understanding where this folder is on my nbox, ps great forum

Quote from mazzano4

HI, could i ask how to find this folder on my nbox, im trying to put an nline onto it im sorry for asking as a newby but i have trawled loads of forums but am just not understanding where this folder is on my nbox, ps great forum

You need to connect to the NBOX with a PC using an ftp client such as winscp or filezilla. You need to know the IP address of the receiver. the username is root and the password is pkteam - then you need to browse to /var/keys, and edit the oscam.server file. If you have oscam installed and working already, then you can log on to oscam webinterface from your browser and do it from there - to do this, you have to type in the ip address of the receiver and the port of webinterface - which is 8888 - for example - 192.168.1.100:8888

Quote from musogeek

You need to connect to the NBOX with a PC using an ftp client such as winscp or filezilla. You need to know the IP address of the receiver. the username is root and the password is pkteam - then you need to browse to /var/keys, and edit the oscam.server file. If you have oscam installed and working already, then you can log on to oscam webinterface from your browser and do it from there - to do this, you have to type in the ip address of the receiver and the port of webinterface - which is 8888 - for example - 192.168.1.100:8888

Hi, Just want to say thanks, i will try it now, been really busy so not had time to log on and see this reply so thanks alot and i will give it a go now, can i do this with dcc as i have that on my computer and its got all the ips showing ? just not how to do it that way

Quote from mazzano4

Hi, Just want to say thanks, i will try it now, been really busy so not had time to log on and see this reply so thanks alot and i will give it a go now, can i do this with dcc as i have that on my computer and its got all the ips showing ? just not how to do it that way

Never used DCC myself but can act as FTP client so should be fine.

hello I have used the following configs but everytime the server freezes the channel gets completely frozen and I have to restart oscam server by pressing the blue key twice and then the green key for it to work again I was using an f5 box before buying nbox5800sx the f5 used to start again itself after the server froze for a couple of seconds what am I doing wrong please help.

oscam config
[global]
logfile = /tmp/oscam.log
clienttimeout = 1600
fallbacktimeout = 1500
clientmaxidle = 300
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
waitforcards_extra_delay = 400
preferlocalcards = 1
dropdups = 1
cacheexwaittime = 60
usrfile = /tmp/oscam/oscamuser.log
cwlogdir = /tmp/oscam/cw
emmlogdir = /tmp/oscam/emm.log

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 8888
httpuser = root
httppwd = pkteam
httprefresh = 0
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.255

oscam server

[reader]
label = cccam
protocol = cccam
device = #####,#####
account = ####,####
group = 1
fallback = 1

oscam user

[account]
user = local
group = 1
cccstealth = 0

thanks got sorted with this thread as well, my old links werent working

hi i've used nano's settings from this thread with oscam 7750 but can only record 1 encrypted channel at a time at a time,ie. recording channel 301 but when i try to watch 106 just black screen ,2nd tuner is working as i can see fta channels whilst recording ,n line is only on this stb , am i missing something