Hi All,
Considering upgrading from BH 1.7.6 to 2.0.0 revA. Will I loose all my recordings that are on the HD.
Do I just download to stick and pop in front usb port on my VU+ duo.
Thanks in advance.
Installing bh 2.0.0 advise
- hs5424
- Thread is marked as Resolved.
-
-
recordings on your hard drive will be fine....its the internal flash that you are flashing to with the bh2.0.1 latest, you will have to install from scratch like a fresh image and reloads all the necessary files again...you will also need to change
-
As long as you don't initialize your HDD after you flash on the new image bud you won't lose your recordings, i would install BH 2.0.1 though as this is a newer image than 2.0.0 rev A.
And yes put your usb stick in the front usb socket and power on.
-
why don't you go straight for the latest 2.0.2 wich is the latest ."meoboot revenge"
-
Thanks guy's,
All useful advise. I was getting pi##ed off again with bh 1.7.6 as I could not download the epg guide for the last two days using BH Epg from Rytec UK. However I decided to try Crossepg for the first time today. To my amazement the epg's returned.
I will test over time and see which is the more stable option, open TV or Rytec. -
crossepg works much better with the xepgdb providers and it does not interrupt your tv viewing but you will have to update your xepgdb providers first
-
crossepg works much better with the xepgdb providers and it does not interrupt your tv viewing but you will have to update your xepgdb providers first
Thank's for your reply,
Yes I used xepgdb providers and it downloaded a new epg last night so things are looking good. Time will tell if it crossepg works better that the BH epg I have been using for the last while.
I will let you know the results. -
i use opentv providers...on 28.2 uk, configured to download each morning on my usb stick at 4am.....works great...lol.
-
i use opentv providers...on 28.2 uk, configured to download each morning on my usb stick at 4am.....works great...lol.
Thanks billy thekid,
I have one box setup on open TV and the other one set for Ryec uk. I will run both over the next week or so and see how both compare. -
Hi all,
I've been abroad for more then a year. I have on old 1.7.? BH backup image. Can I flash the latest BH 2.0.2 image without any hazzles?:ops:Thx, -
Hi all,
I've been abroad for more then a year. I have on old 1.7.? BH backup image. Can I flash the latest BH 2.0.2 image without any hazzles?:ops:Thx,Should have no problems mate, the b/l last changed in version 1.6.7
-
Thx m8. What about smargo drivers, are the new ones incl. in the latest images? I'm using a smargo for my 093E card.
-
I just checked. Right now I have BH 1.6.6 version Oct 12 2011-vuplud_experimental in flash. Just to be sure. Can I install any BH 2.0.o-2.0.2 images without drivers issue?
-
Ow Well Here go`. I am about to load BH 2.02 to my (Original Duo), so lets see what happens?
-
Hi All,
UPDATE.
Crossepg with xepgdb is working fine for over a week now. One box I have setup with open TV and the other is set for Rytec UK. It seems that this is a better option than the BH epg that I have been using for the past 18 months. Hope it lasts. -
I just checked. Right now I have BH 1.6.6 version Oct 12 2011-vuplud_experimental in flash. Just to be sure. Can I install any BH 2.0.o-2.0.2 images without drivers issue?
You need to flash this before the new image buddy.
[h=3]duo cfe Rev 3.0[/h] -
You need to flash this before the new image buddy.
duo cfe Rev 3.0Done it.
Thx. To much soccer lately, no time for upgrading image yet.... -
Done it.
Thx. To much soccer lately, no time for upgrading image yet....
It takes no time at all buddy, what are you waiting for. -
Thanks billy thekid,
I have one box setup on open TV and the other one set for Ryec uk. I will run both over the next week or so and see how both compare.
Update,
After running crossepg for many weeks now I have proven that it works better than the BH epg setup. I have noticed that if the epg's do not display properly restarting the GUI will restore them perfectly. No need to force epg download at all.
I will be staying with crossepg. -
BH is currrently running BH 2.0.3 now ...
VU+ DUO PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!