Hello as the title can be reshare with newcamd protocol?
I've server ubuntu with oscam, no cccam.
Some advice?
thanks
Newcamd reshare it's possible?
- diovedeeprovvede
- Thread is marked as Resolved.
There are 24 replies in this Thread which was already clicked 7,602 times. The last Post () by diovedeeprovvede.
-
-
yes m8 it can be done :)
-
yes m8 it can be done :)
Thanks, but how configure my oscam.conf & oscam.user
i can't send pm , i haven't 10 post!!!
-
[newcamd]
port = whatewer you want @ caid : ident
key = 0102030405060708091011121314 (you may set other numbers)
keepalive = 1
that`s in conf
in user
user
[account]
user = what you want
pwd = whatyouwant
group = 1,2,3,........n line is
N:yourdns portinconf user pwd 0102030405060708091011121314 -
[newcamd]
port = whatewer you want @ caid : ident
key = 0102030405060708091011121314 (you may set other numbers)
keepalive = 1
that`s in conf
in user
user
[account]
user = what you want
pwd = whatyouwant
group = 1,2,3,........n line is
N:yourdns portinconf user pwd 0102030405060708091011121314Ok thanks, but if i' d like share this line to another person,how do I set one reshare. with cccam can be done, and with newcamd protocol?? example
[account]
cccreshare = 1
cccmaxhops = 2
ecc... -
yes, but you may share c line with oscam if you like, only go in configuration click cccam, define port and others parameters, reboot and after is everything like with newcamd (in oscam user)
-
yes, but you may share c line with oscam if you like, only go in configuration click cccam, define port and others parameters, reboot and after is everything like with newcamd (in oscam user)
ok but i have a server with only oscam no cccam
MY CONF
[global]
nice = -1
WaitForCards = 1
saveinithistory=1
# logging
ClientTimeout = 5
LogFile = stdout
#Level =
CacheDelay = 120
#lb_mode = 1
logfile = /var/log/oscam.log
#logfile = /var/log/rejected_check.log[webif]
httpport = xxxx
httpuser = xxxx
httppwd = xxxx
httpallowed = 0.0.0.0-255.255.255.255
httprefresh = 15
httpshowpicons = 1
httptpl = /var/picons
#httpscript = /usr/local/bin/oscam.sh# protocols
[newcamd]
port = 11000@09cd:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1[cs357x]
port = 21000@09cd:000000
serverip = xxxxxxMY IDEA IS THIS
For example
# protocols
[newcamd]
port = 11000@09cd:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1
cccreshare = 1 IT'S CORRECT???
cccmaxhops = 2The purpose is that another person reshare my Nline 1 or 2 time.
It's possible or not! or do I have to force cccam
-
How config oscam.user file to configure N line for get only 2 reshare???
It's possible???? -
Any idea???
-
As far as i know you cannot control the direct reshare from an N line.
-
ok thanks, but if i add cccam in my server ubuntu oscam, can you help me to configure???
I have just tried but without result :sad: -
As far as i know you cannot control the direct reshare from an N line.
but if send my nline to another person he can reshare o no?
-
You need to enable CCcam protocol so in oscam.conf so you need to add something like this;
change port to what you want, and if you are sharing externally this needs to be forwarded from router to server
you can add user accounts in oscam.user with something like this
-
Quote
but if send my nline to another person he can reshare o no?
There is nothing stopping him using the 256 trick to pass off your card as his own local card if you give him an N line. As stated by Musogeek you need to set up CCCam protocol in OSCam and give your peer a C line.
-
you will see when peer reshare your line because it`s too many more ecm reqests
-
You need to enable CCcam protocol so in oscam.conf so you need to add something like this;
change port to what you want, and if you are sharing externally this needs to be forwarded from router to server
you can add user accounts in oscam.user with something like this
oscam.conf
[global]
nice = -1
WaitForCards = 1
saveinithistory=1
# logging
ClientTimeout = 5
LogFile = stdout
#Level =
CacheDelay = 120
#lb_mode = 1
logfile = /var/log/oscam.log
#logfile = /var/log/rejected_check.log[webif]
httpport = +6969
httpuser = ***tv2012
httppwd = cazzola80
httpallowed = 0.0.0.0-255.255.255.255
httprefresh = 15
httpshowpicons = 1
httptpl = /var/picons
#httpscript = /usr/local/bin/oscam.sh# protocols
[newcamd]
port = xxxxxx@09cd:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1[cs357x]
port = xxxxx@09cd:000000
serverip = xxxxxxxxxxxx[cccam]
port = 12000
version = 2.2.1
reshare = 1
stealth = 1oscam.server
[reader] this is correct???
label = ***ita hd
protocol = smartreader
device = 003:002
ins7e11 = 15
ins7e = 00000000000000000000000000000000000000000000000000 00
cacheex = 1
caid = 09CD
boxid = 12345678
detect = cd
ident = 09CD:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
ecmwhitelist = 09CD:B7,51
ecmheaderwhitelist = 09CD@000000:8070B4000001,8170B4000001 -
SERVER LISTEN PORT : 12000
CARD INFO PORT : 14000
ONLINE CLIENTS PORT : 15000
ONLINE CONNECTIONS PORT : 15001
ONLINE SHARES PORT : 15002B: /dev/sci0 00 how set this???
B: /dev/sci1 00SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/Autoroll.KeySTATIC CW FILE : /var/keys/constant.cw
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
CAID PRIO FILE : /var/etc/CCcam.prioSECA HANDLER : 4
DISABLE EMM: NO -
Quote
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0Is the same as
QuoteB: /dev/sci0 00
You just have to set it for each card reader.
-
When i reboot pc i have an error ins7e = 00000000000000000000000000000000000000000000000000 00
and oscam dosen't start?how do connect oscam to cccam???
-
http://linuxsat-support.com/os…-connect-oscam-cccam.html
I am a bit lost I thought you wanted to use oscam's CCcam protocol as a standalone server - connecting with CCcam internally is not needed on the server - you don't need CCcam, but if you want to give your peer a cline or share with an internal CCcam client then this can be done - follow what i said before to set the user account
C: internal_ip_address_or_dyndns.com 12000 user pass
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!