oscam port settings

Hi Everyone

Very new to oscam only server setup. Bit confused as to what file to put my dns port setting. I assume it will go in the oscam.conf file. If so how is it imputted?

Regards

Hi musogeek

Yes m8. I want to try and set up an oscam only server. so I want set up oscam to use CCcam protocol.

Regards

Hi

Getting a bit closer now but stuck on groups (very confused) Could I start with my config files first (below) Could someone cast an eye over them and give any advise please.

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols

[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------

nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120

lb_mode = 1

----------------------------------------------------------------

oscam.server

[reader]
label = s****
protocol = smartreader
device = 001:004
caid = 0963
#boxid = ********
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 1
blockemm-s = 1
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7D,7E,80,8B,85
#AU = 1

[reader]
label = T****
Protocol = smartreader
detect = cd
device = 001:005
Group = 2
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000

#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,10000
user = *****
password = *****
group = 3
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1

#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,34001
user = *****
password = *****
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1

#PEER
[reader]
label = ************.dyndns.info
description = S*******
protocol = cccam
device = *******.dyndns.info,*****
user = ********
password = *******
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1

oscam.user

[account]
user = *****
pwd = *****
group = 1,2,3
monlevel = 0
au = s****
caid = 0963
keepalive = 1

[account]
user = *****
pwd = *****
group = 1,2,3
au = t****
keepalive = 1

[account]
user = Username from CCcam fline
pwd = Pass from CCcam fline
hostname = Your peers dns here ( this does the same as locking the fline in CCcam)
keepalive = 1
group = 1,2,3 (this is based on your reader groups & what you want peers to access)
cccmaxhops = 3 (hops of server your peer can access)
cccignorereshare = 0 (the reshare value set in oscam.conf is applied)

Regards

Hi Everyone

The above config's would not work. However after a bit of tinkering I seem to have cracked it. Could someone take a look at these new config's (below) and see if there is any problems with them and advise as to what I may need to possibly add or delete from them.

oscam.conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols

[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------

nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120

lb_mode = 1

------------------------------------------------------------------------------

oscam.server

[reader][card1]
label = S****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:005
user = *****
password = *****
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1

[reader][card2]
label = T****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:006
user = *****
password = *****
group = 2
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1

[reader][peer]
label = **********.dyndns.info
description = S******
protocol = cccam
device = **********.dyndns.info,11123
user = ********
password = *******
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1

[reader][local server box]
label = 192.168.*.*
enable = 1
protocol = cccam
device = 192.168.*.*,port*
user = ************
password = ******
cccversion = 2.1.3
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0

oscam.user

[account][card1]
user = *****
pwd = *****
group = 1,2,3,4
monlevel = 0
au = s****
caid = 0963
keepalive = 1

[account][card2]
user = *****
pwd = *****
group = 1,2,3,4
au = t****
keepalive = 1

[account][peer]
user = *********
pwd = **********
hostname = **********.dyndns.info
keepalive = 1
group = 1,2,3,4
cccmaxhops = 3
cccignorereshare = 0

[account][local server box]
user = *******
pwd = ******
#hostname =
group = 1,2,3,4
cccmaxhops = 3
cccreshare = 0

Regards