Evening All
Anyone got Sly Sports box office open?
Regards
Evening All
Anyone got Sly Sports box office open?
Regards
Hi zvonko67
Image loaded ok. Only thing is hard drive wont initialise. Any ideas?
Regards
Hi master G
Any chance of Cccam 2.3.0 for Camando please?
Regards
Hi Everyone
Just in case it is of use to anyone here is my Oscam file I just compiled for my Ubuntu 16.04 desktop server. It is compiled for use with pcsc (Omnikey) only
Regards
- - - Updated - - -
Oscam r11273
Regards
Hi master G
Spot on advise as usual. Thank You. I now have Oscam r11273 running with CCcam 2.1.3 on Ubuntu 16.04 desktop.
Regards
Hi Everyone
Out of the 3 Oscam files to download in the Oscam download section is there 1 in particular I should download for the Omnikey reader?
oscam-svn11273-x86_64-pc-linux-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11273-x86_64-pc-linux-webif-libusb-Distribution.tar.gz
oscam-svn11273-x86_64-pc-linux-webif-Distribution.tar.gz
Regards
Hi Everyone
Anyone got the knowledge or time to edit the script so it will work on Debian 7? I have tried to install it a few times and it seems to install flawlessly but files are missing I.E the emu folder and also the permissions are not set correctly in usr/local. Seems like the updates in Debian 7 wont work with this script.
Regards
Jeff
Hi All
Any body tested this with Debian-8.6.0-amd64-netinst ??
Regards
Jeff
Hi Everyone
Just bought one of these box's to test to see if it is any good. Anyway did as they say (Flash it first with official flash from Blade Media etc.) Then Flashed it with latest 9991 flash no problems at all until I used it with a diseqc
switch.
I configured 13 A, 19 B, S*y C. I can watch S*y and change channel no problems at all but when I change to 13 or 19 and choose a channel if I am quick it clears no problem but after a minute or so it just re-boots. This only happens on 13 and 19. Any ideas anyone?
Regards
Hi bh0y
Thanks for the reply. Is it the "New Extra url For Dream Elite4" that was posted in 2012 in the extra url section?
Regards
Jeff
Hi master G
Yes. Wont install
Regards
Hi Everyone
Just installed this image on my DM800. I have searched everywhere on how to install cccam and can't find how to anywhere. Can someone help please?
Regards
Hi Ten
I see your configs are different to the ones the CCCam to OSCam config converter makes. Is this tool out of date now?
Regards
Hi Everyone
The above config's would not work. However after a bit of tinkering I seem to have cracked it. Could someone take a look at these new config's (below) and see if there is any problems with them and advise as to what I may need to possibly add or delete from them.
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols
[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120
lb_mode = 1
------------------------------------------------------------------------------
oscam.server
[reader][card1]
label = S****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:005
user = *****
password = *****
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
[reader][card2]
label = T****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:006
user = *****
password = *****
group = 2
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
[reader][peer]
label = **********.dyndns.info
description = S******
protocol = cccam
device = **********.dyndns.info,11123
user = ********
password = *******
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1
[reader][local server box]
label = 192.168.*.*
enable = 1
protocol = cccam
device = 192.168.*.*,port*
user = ************
password = ******
cccversion = 2.1.3
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0
oscam.user
[account][card1]
user = *****
pwd = *****
group = 1,2,3,4
monlevel = 0
au = s****
caid = 0963
keepalive = 1
[account][card2]
user = *****
pwd = *****
group = 1,2,3,4
au = t****
keepalive = 1
[account][peer]
user = *********
pwd = **********
hostname = **********.dyndns.info
keepalive = 1
group = 1,2,3,4
cccmaxhops = 3
cccignorereshare = 0
[account][local server box]
user = *******
pwd = ******
#hostname =
group = 1,2,3,4
cccmaxhops = 3
cccreshare = 0
Regards
Hi
Getting a bit closer now but stuck on groups (very confused) Could I start with my config files first (below) Could someone cast an eye over them and give any advise please.
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols
[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120
lb_mode = 1
----------------------------------------------------------------
oscam.server
[reader]
label = s****
protocol = smartreader
device = 001:004
caid = 0963
#boxid = ********
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 1
blockemm-s = 1
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7D,7E,80,8B,85
#AU = 1
[reader]
label = T****
Protocol = smartreader
detect = cd
device = 001:005
Group = 2
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000
#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,10000
user = *****
password = *****
group = 3
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,34001
user = *****
password = *****
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
#PEER
[reader]
label = ************.dyndns.info
description = S*******
protocol = cccam
device = *******.dyndns.info,*****
user = ********
password = *******
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1
oscam.user
[account]
user = *****
pwd = *****
group = 1,2,3
monlevel = 0
au = s****
caid = 0963
keepalive = 1
[account]
user = *****
pwd = *****
group = 1,2,3
au = t****
keepalive = 1
[account]
user = Username from CCcam fline
pwd = Pass from CCcam fline
hostname = Your peers dns here ( this does the same as locking the fline in CCcam)
keepalive = 1
group = 1,2,3 (this is based on your reader groups & what you want peers to access)
cccmaxhops = 3 (hops of server your peer can access)
cccignorereshare = 0 (the reshare value set in oscam.conf is applied)
Regards
Hi musogeek
Yes m8. I want to try and set up an oscam only server. so I want set up oscam to use CCcam protocol.
Regards
Hi Everyone
Very new to oscam only server setup. Bit confused as to what file to put my dns port setting. I assume it will go in the oscam.conf file. If so how is it imputted?
Regards
Hi nano
Thanks for the reply. I am going to try and set up an oscam only server. It just seems a bit complicated on what I have read on setting one up it took me long enough to get my head around the automated cccam/oscam guide!! I'm one of these need a step by step idiots guide type of guys. I will try though as CCcam is getting a bit unstable for me for some reason.
Regards