Hi Everyone
Very new to oscam only server setup. Bit confused as to what file to put my dns port setting. I assume it will go in the oscam.conf file. If so how is it imputted?
Regards
Hi Everyone
Very new to oscam only server setup. Bit confused as to what file to put my dns port setting. I assume it will go in the oscam.conf file. If so how is it imputted?
Regards
Have a read through the other support threads, you will see many examples.
Try this one for a start.
[h=1]Oscam only server? Help please[/h]
do you mean the oscam equivalent to server listen port? - are you setting up Oscam to use CCcam protocol?
Hi musogeek
Yes m8. I want to try and set up an oscam only server. so I want set up oscam to use CCcam protocol.
Regards
Hi musogeek
Yes m8. I want to try and set up an oscam only server. so I want set up oscam to use CCcam protocol.
Regards
Look at post #10 in the thread i linked you to then jeffzapp.
Hi
Getting a bit closer now but stuck on groups (very confused) Could I start with my config files first (below) Could someone cast an eye over them and give any advise please.
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols
[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120
lb_mode = 1
----------------------------------------------------------------
oscam.server
[reader]
label = s****
protocol = smartreader
device = 001:004
caid = 0963
#boxid = ********
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 1
blockemm-s = 1
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7D,7E,80,8B,85
#AU = 1
[reader]
label = T****
Protocol = smartreader
detect = cd
device = 001:005
Group = 2
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000
#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,10000
user = *****
password = *****
group = 3
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
#N LINE
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,34001
user = *****
password = *****
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
#PEER
[reader]
label = ************.dyndns.info
description = S*******
protocol = cccam
device = *******.dyndns.info,*****
user = ********
password = *******
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1
oscam.user
[account]
user = *****
pwd = *****
group = 1,2,3
monlevel = 0
au = s****
caid = 0963
keepalive = 1
[account]
user = *****
pwd = *****
group = 1,2,3
au = t****
keepalive = 1
[account]
user = Username from CCcam fline
pwd = Pass from CCcam fline
hostname = Your peers dns here ( this does the same as locking the fline in CCcam)
keepalive = 1
group = 1,2,3 (this is based on your reader groups & what you want peers to access)
cccmaxhops = 3 (hops of server your peer can access)
cccignorereshare = 0 (the reshare value set in oscam.conf is applied)
Regards
Hi Everyone
The above config's would not work. However after a bit of tinkering I seem to have cracked it. Could someone take a look at these new config's (below) and see if there is any problems with them and advise as to what I may need to possibly add or delete from them.
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
#maxlogsize = 1000
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 5
httpallowed = 127.0.0.1,192.168.*.*-192.168.*.***
# protocols
[newcamd]
key = 0102030405060708091011121314
port = *****@****:000000;*****@****:000000
keepalive = 1
#mgclient = 0
#
------------------------------------------------------------------------------
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
httphideidleclients = 0
debug = 255
-------------------------------------------------------------------------------
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120
lb_mode = 1
------------------------------------------------------------------------------
oscam.server
[reader][card1]
label = S****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:005
user = *****
password = *****
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
[reader][card2]
label = T****
enable = 1
protocol = smartreader
key = 0102030405060708091011121314
device = 001:006
user = *****
password = *****
group = 2
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccversion = 2.1.3
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
[reader][peer]
label = **********.dyndns.info
description = S******
protocol = cccam
device = **********.dyndns.info,11123
user = ********
password = *******
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1
[reader][local server box]
label = 192.168.*.*
enable = 1
protocol = cccam
device = 192.168.*.*,port*
user = ************
password = ******
cccversion = 2.1.3
group = 4
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 1
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0
oscam.user
[account][card1]
user = *****
pwd = *****
group = 1,2,3,4
monlevel = 0
au = s****
caid = 0963
keepalive = 1
[account][card2]
user = *****
pwd = *****
group = 1,2,3,4
au = t****
keepalive = 1
[account][peer]
user = *********
pwd = **********
hostname = **********.dyndns.info
keepalive = 1
group = 1,2,3,4
cccmaxhops = 3
cccignorereshare = 0
[account][local server box]
user = *******
pwd = ******
#hostname =
group = 1,2,3,4
cccmaxhops = 3
cccreshare = 0
Regards
Don’t have an account yet? Register yourself now and be a part of our community!