Hi, i cannot see why my one card is not clearing after installing new image (BlackHole 2.03), new Oscam (svn8639) -i use the old config files from before. Please see picture of my oscam log...456f877afed.png. Hope someone clever guy can help me out. Thanks in advance!
not clearing Viasat 093E card on VU+Uno with smargo reader and BH 2.03 image
-
- Nagra Cards OSCam
- dbstaff
- Thread is marked as Resolved.
-
-
The dvbapi client has au = off so you are not getting any entitlements..
If you have working configs then restart oscam a few times from BlackHole Blue Panel..
If that fails use oscam from here --> oscam-8639_blackhole2_mips32el.ipk ..
You could post your configs to see if there is anything we can change..
-
Thanks a lot Master G, I will try Enable the AU/Auto Update first and see...if not I Defiantly try post my config's here to se if you can find some issues in them...thanks again!
-
hi again...Master G i now have checked the AU status in my DVApi config and it IS Enabled like you said is was not? So i still cannot find the problem why Oscam is not clearing the card... i have taken screenshot to show log and webif. I can post my configs if necessary also? Hope you or someone kind can help here :) Thanks in advance mate!e69d8d4f.png
-
Try put AU=name of reader (label).
-
@CCcam...if i should put the provider name (label) after AU= i need to put two names since i have to cards in my Vu+ box and it's only the one of them Oscam does not clear!?! And these configs worked fine before updating Oscam bin file??
-
# oscam.conf
[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
disableuserfile = 0
nice = -1
maxlogsize = 2048
preferlocalcards = 1
saveinithistory = 1
cacheexwaittime = 5
dropdups = 1[monitor]
aulow = 120
hideclient_to = 15
appendchaninfo = 1[newcamd]
port = 34001@090F:000000;34002@0B00:000000
key = E4B2B354C526B5AA591E5CF2AECB[cccam]
port = 12510
reshare = 1
version = 2.1.4
stealth = 1
nodeid = C269DA9810531534[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = anonymous[webif]
httpport = 3333
httpuser = root
httppwd = pass
httptpl = /etc/tuxbox/config/TPL/
httpallowed = 192.0.0.0-255.255.255.255# oscam.server
[reader]
label = viasat
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = ********
ecmwhitelist = 84,88,98,AA
detect = cd
mhz = 500
cardmhz = 500
ident = 093E:000000
group = 1
emmcache = 1,3,2[reader]
label = canal
protocol = internal
device = /dev/sci1
caid = 0B00
detect = cd
mhz = 500
cardmhz = 357
ident = 0B00:000000
group = 2
emmcache = 1,3,2# oscam.user
[account]
user = 1xxx333
pwd = nmnmnm7777
group = 1,2,3
uniq = 1
monlevel = 0
cccignorereshare = 0
keepalive = 1[account]
user = 2xxx333
pwd = nmnmnm7777
group = 1,2
uniq = 1
monlevel = 4
au = 1
cccignorereshare = 0[account]
user = 3xxx333
pwd = nmnmnm7777
group = 1,2,3
uniq = 1
monlevel = 0
au = 1
cccignorereshare = 0[account]
user = 4xxx333
pwd = nmnmnm7777
group = 1,2,3
uniq = 1
monlevel = 0
au = 1
cccignorereshare = 0[account]
user = 5xxx333
pwd = nmnmnm7777
group = 1,2
uniq = 1
monlevel = 0
cccignorereshare = 0[account]
user = 6xxx333
pwd = nmnmnm7777
group = 1,2,3
uniq = 1
monlevel = 0
cccignorereshare = 0 -
Does anyone know why Oscam status log is showing the message "plain dvapi-client granted (AU=off)" when the AU is NOT off..please see picture with config d4aafe50dc5a.png23562ac8f5f570f5233f.png
-
Does anyone know why Oscam status log is showing the message "plain dvapi-client granted (AU=off)" when the AU is NOT off..please see picture with config d4aafe50dc5a.png23562ac8f5f570f5233f.png
Adding au = 1 in oscam.server [reader] section, did the trick for me.
au = 1 (Undocumented feature)FYI:
[newcamd]
port = 34001@090F:000000;34002@0B00:000000
should be changed to
port = 34001@093E:000000;34002@0B00:000000Best regards
-
master G
Set the Label from Viasat OSCam to Nagra Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!