thats what happend to me when first loaded it turned out to be settings it loads 1080p my tv is old samsung plasma 720p. so didnt show pic showed bootlogo then thats it i had to use my other tv to change settings bit of a pain put it shorted it out.
Same boot loop with my LCD full HD, connection by HDMI.
So far I've been disappointed by all e2 images for Alien2...
So far I've been disappointed by all e2 images for Alien2...
Have you tried my Hyperion v2 Image - RapidShare ? Secure Data Logistics
I'd like to think that I could change your mind :)
Link to post and Discussion Thread here - http://linuxsat-support.com/am…on-v2-complete-image.html
how to fix?
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Sat Jan 1 01:04:47 2000</crashdate>
<compiledate>Jun 12 2013</compiledate>
<contactemail>somebody who cares</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PKT_RedHD/skin.xml</skin>
<sourcedate>2013-05-10</sourcedate>
<branch>(no branch)</branch>
<rev>20a5a1f</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>spark7162</stbmodel>
<kernelversion>
<![CDATA[
Linux spark7162 2.6.32.59_stm24_0211 #1 PREEMPT Wed Jun 12 19:46:08 CEST 2013 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:30:00:0A:00:26:E4 Manufacture=Spark-Project STB_ID=0C:00:0A:00:00:26:E4</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=0270201209300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions down
down
action -> WizardActions right
right
action -> WizardActions right
right
action -> WizardActions right
right
action -> WizardActions left
left
action -> WizardActions left
left
action -> WizardActions down
down
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
MATRIX
LNB
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions left
Creating setup
left
action -> WizardActions left
Creating setup
left
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions right
Creating setup
right
action -> WizardActions ok
OK
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Dummy DVB-T, need rotorworkaround No, enabled No, DVB-S2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 1 configmode: simple
diseqcmode: single
slot: 2 configmode: nothing
sec config completed
finished
Updating values in step 9
playing None
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 10
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 11
wizard step: {'code': u'self.hideRc()', 'text': 'Do you want to do a service scan?', 'id': 'scanquestion', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and not config.misc.installwizard.channellistdownloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('No', 'softcam'), ('Yes, do an automatic scan now', 'scan'), ('Yes, do a manual scan now', 'manualscan')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Effettuare una ricerca canali?
code self.hideRc()
showing list, 11
self.list: <Components.Sources.List.List object at 0x1b965ec>
self.list: <Components.Sources.List.List object at 0x1b965ec>
setZPosition
showing config
Now: 11
Now: 11
action -> WizardActions ok
OK
finished
current: ('No', 'softcam')
getStepWithID: softcam
result: 14
Updating values in step 15
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 16
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard. Your receiver is now ready for use.\nPress OK to start using your receiver.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}, 'laststep': 'true'}
wizard text Il ricevitore è ora pronto per essere utilizzato./nOK >> continuare.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 16
self.list: <Components.Sources.List.List object at 0x1b965ec>
self.list: <Components.Sources.List.List object at 0x1b965ec>
setZPosition
showing config
Now: 16
Now: 16
action -> WizardActions ok
OK
finished
wizard finished
Now: 16
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/networkwizard.xml']
getStepWithID: start
result: nothing
('it_IT', ('Italiano', 'it', 'IT'))
[SKIN] Parsing embedded skin <embedded-in-'NetworkWizard'>
WizardCreateSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nIf you want to connect your receiver to the Internet, this wizard will guide you through the basic network setup of your receiver.\n\nPress OK to start configuring your network', 'displaytext': 'Network wizard', 'id': 'welcome', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.selectInterface()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Benvenuti.
Se si desidera collegare il ricevitore a internet, questa procedura guidata fornirà supporto nella configurazione di rete del ricevitore.
Ok >> Iniziare la configurazione della rete.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 1
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
action -> WizardActions ok
OK
finished
code self.selectInterface()
getStepWithID: nwconfig
result: 2
Updating values in step 3
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")\nself.selectKey("UP")\nself.selectKey("DOWN")\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'text': 'Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure interface', 'id': 'nwconfig', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.AdapterSetupEnd(self.selectedInterface)', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.AdapterSetup'>, 'args': 'self.selectedInterface', 'type': 'ConfigList'}}
wizard text Configurare la connessione a Internet inserendo i parametri richiesti.
Quando pronti, premere OK per continuare.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
selectPic: arrowup
selectPic: arrowdown
selectPic: arrowup2
showing list, 3
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
wizard screen <class 'Screens.NetworkSetup.AdapterSetup'>
warning, skin is missing element HelpWindow in <class 'Screens.NetworkSetup.AdapterSetup'>
clearConfigList <Components.ConfigList.ConfigList object at 0x20b1ecc> <Components.ConfigList.ConfigList object at 0x20b196c>
clearConfigList <Components.ConfigList.ConfigList object at 0x20b196c> <Components.ConfigList.ConfigList object at 0x20b196c>
Now: 3
Now: 3
action -> WizardActions down
down
action -> WizardActions right
right
action -> WizardActions ok
OK
action -> MsgBoxActions ok
setting for adapter eth0 attribute up to value True
setting for adapter eth0 attribute dhcp to value True
setting for adapter eth0 attribute ip to value [0, 0, 0, 0]
setting for adapter eth0 attribute netmask to value [0, 0, 0, 0]
setting for adapter eth0 attribute gateway to value [0, 0, 0, 0]
[OpenWebif] Stopping server on port 80
[OpenWebif] Stopping server on port 443
[ePopen] command: /etc/init.d/avahi-daemon stop
child has terminated
pipes closed
[eBatch] retval=127, cmds left=7, data:
/bin/sh: /etc/init.d/avahi-daemon: not found
[ePopen] command: ifdown eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=6, data:
ifdown: interface eth0 not configured
[ePopen] command: ip addr flush dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=5, data:
[ePopen] command: /etc/init.d/networking stop
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=4, data:
Deconfiguring network interfaces... done.
[ePopen] command: killall -9 udhcpc
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=1, cmds left=3, data:
killall: udhcpc: no process killed
[ePopen] command: rm /var/run/udhcpc*
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=1, cmds left=2, data:
rm: can't remove '/var/run/udhcpc*': No such file or directory
[ePopen] command: /etc/init.d/networking start
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=1, data:
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc (v1.21.0) started
Sending discover...
Sending discover...
Sending select for 192.168.1.2...
Lease of 192.168.1.2 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 8.8.8.8
adding dns 8.8.4.4
udhcpc (v1.21.0) started
Sending discover...
Sending select for 192.168.1.2...
Lease of 192.168.1.2 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 8.8.8.8
adding dns 8.8.4.4
done.
[ePopen] command: /etc/init.d/avahi-daemon start
child has terminated
pipes closed
[eBatch] retval=127, cmds left=0, data:
/bin/sh: /etc/init.d/avahi-daemon: not found
[ePopen] command: ip -o addr show dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[8, 8, 8, 8], [8, 8, 4, 4]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 2], 'up': True, 'mac': '30:00:0a:00:26:e4', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
action -> MsgBoxActions ok
finished
code self.AdapterSetupEnd(self.selectedInterface)
[ePopen] command: ping -c 1 [url=http://www.openpli.org]OpenPLi - Open Source Set-Top Box Software[/url]
[ePopen] command: ping -c 1 [url=http://www.google.nl]Google[/url]
[ePopen] command: ping -c 1 [url=http://www.google.com]Google[/url]
Now: 3
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
getStepWithID: checklanstatusend
result: 4
Updating values in step 5
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Your receiver is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == True )', 'timeoutaction': 'nextpage', 'nextstep': 'end', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': u'currStep = self.numSteps \nself.wizard[currStep]['nextstep'] = None\nself.markDone()\nself.close()', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Il ricevitore è pronto per l'uso.
La connessione a Internet è attiva.
Ok >> Continuare
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 5
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
Now: 5
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
action -> WizardActions ok
OK
finished
code currStep = self.numSteps
self.wizard[currStep]['nextstep'] = None
self.markDone()
self.close()
getStepWithID: end
result: 13
Updating values in step 14
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Grazie per aver utilizzato questa configurazione guidata.
Premere OK per continuare.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 14
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
Now: 14
Now: 14
[Picon] adding path: /usr/share/enigma2/picon/
[ePNG] couldn't open /usr/local/share/enigma2/PKT_RedHD/progress_small.png
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[SKIN] No skin to read...
[SKIN] No skin to read...
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
action -> OkCancelActions cancel
action -> InfobarMenuActions mainMenu
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
action -> OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
action -> OkCancelActions ok
okbuttonClick
action -> MsgBoxActions ok
[SKIN] Parsing embedded skin <embedded-in-'SecParameterSetup'>
action -> SetupActions cancel
action -> OkCancelActions cancel
action -> OkCancelActions cancel
action -> OkCancelActions ok
okbuttonClick
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
[SKIN] Parsing embedded skin <embedded-in-'BPanel'>
action -> WizardActions down
action -> WizardActions down
action -> WizardActions down
action -> WizardActions right
action -> WizardActions right
action -> WizardActions right
action -> WizardActions down
action -> WizardActions down
action -> WizardActions ok
[SKIN] Parsing embedded skin <embedded-in-'ScreenEmu'>
warning, skin is missing element defaultCAM in <class 'Plugins.Extensions.EMUmanager.plugin.ScreenEmu'>
warning, skin is missing element config in <class 'Plugins.Extensions.EMUmanager.plugin.ScreenEmu'>
No watching file at time: 2000-01-01 00:04:41
No watching file at time: 2000-01-01 00:04:41
No watching file at time: 2000-01-01 00:04:42
No watching file at time: 2000-01-01 00:04:42
No watching file at time: 2000-01-01 00:04:43
action -> DirectionActions right
No watching file at time: 2000-01-01 00:04:43
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
No watching file at time: 2000-01-01 00:04:44
No watching file at time: 2000-01-01 00:04:44
No watching file at time: 2000-01-01 00:04:45
No watching file at time: 2000-01-01 00:04:45
No watching file at time: 2000-01-01 00:04:46
No watching file at time: 2000-01-01 00:04:46
No watching file at time: 2000-01-01 00:04:47
action -> OkCancelActions cancel
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>Have you tried my Hyperion v2 Image - RapidShare ? Secure Data Logistics
I'd like to think that I could change your mind :)
Link to post and Discussion Thread here - http://linuxsat-support.com/am…on-v2-complete-image.html
Thanks championc, tried it but recently I found PKT-Hyperion v2.1 mod by mui4tler more satisfactory.
Cheers
Don’t have an account yet? Register yourself now and be a part of our community!
