Hallo everybody
I have a dreambox 800 HDse to flash
How can i know wether he is clon or not
thanks for the help
morouvif:44_002:
Clon or original
- morouvif
- Thread is marked as Resolved.
-
-
What does it say on the front display when it boots up?
You could also have a look inside at the SIM card.
Nano
-
& how much did you pay for it? Will tell you if clone of not??
-
What does it say on the front display when it boots up?
You could also have a look inside at the SIM card.
Nano
hello
During the boot process he shw something like SIM2 84
Now unfortunatelly i have no CA found
to inspiral
the box is not for me so i don't know it price
thanks -
clone
did you flash an original image?
-
clone
did you flash an original image?
Yes bh0y
and since 24 hours i am trying but no chance
please help me
thanks -
When you start it up or put it in flash mode by holding the power button then powering up what do you see on the LCD?
-
guessing will display no ca found
has it mini flash button on back of box?
-
R01: No ca found
-
guessing will display no ca found
has it mini flash button on back of box?
I don't anderstand the question . What do you mean by flash button. My english is not so gut -
Read here & follow the guide m8 -> http://linuxsat-support.com/showthread.php?t=6250
-
By the looks of it you have a sim 2.10 box with bootloader 84
If you follow he link given by inspiral you should be able to recover the box. Once recovered you can then flash a new SIM 2.10 image to the box.
Nano
-
By the looks of it you have a sim 2.10 box with bootloader 84
If you follow he link given by inspiral you should be able to recover the box. Once recovered you can then flash a new SIM 2.10 image to the box.
Nano
Hallo nano
Inspirals link did not helpl me.
i don't have the opprtunity to choose the firmware. When i put the box on the flash still inactive.
thanks -
Have a look at this thread.
The last time i recovered a Dreambox it was an old 7020Si. I'm very careful when i install images so its been a long while since i have had to recover a box.
Nano
-
hallo
i have one question
what is the meaning of bl82(10 --- When it finishes you can click the back button of your browser so we can then send in the bl82 do not reboot)
thanks -
hello everybody
i think i am looking for working Optiflasher .
Can sobody help me. The one on the board is dead:72:
thanks -
Hi Mate, Is there a small,round black push button on he rear of the box, If so, keep it pressed whilst you power up the box, look at the front display and it should say 'stop' and underneath that it will show an ip address 182.158.0.171 something like that, type that ip in your browser and re-flash with the correct clone image, in the dm800se section, hope that helps
Junger -
hello everybody
i think i am looking for working Optiflasher .
Can sobody help me. The one on the board is dead:72:
thanksjunger is correct as certain dm800 receivers have this reset button on the back which would be a godsend..
If all else fails try this below as i can confirm this does sort bootloader/corrupted image issues...however you will need a comp with a serial port.
http://linuxsat-support.com/showthread.php?t=35300&p=133627&viewfull=1#post133627
MK
-
If still having problems?
Give Satdreamgr toolbox a try!!
It includes Optiflasher/Dreamup/noCAerror repair etc etc -
junger is correct as certain dm800 receivers have this reset button on the back which would be a godsend..
If all else fails try this below as i can confirm this does sort bootloader/corrupted image issues...however you will need a comp with a serial port.
http://linuxsat-support.com/showthread.php?t=35300&p=133627&viewfull=1#post133627
MK
hi Mee®kat
Your link i load it.
But it dosn't work and it get this small usb port on the back
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!