oscam glitching from cache

**anniman** · Jan 1st 2014

why does this happen. its not all the time and I still don't know why. it doesnt matter if it draws it from the card cache or cache 3 its when the times go really low like 1ms or even 0ms and even when switching between caches. my server has run for weeks without a glitch but now randomly. all users are the same, all users are a cline, oscam + cccam version 9040 and configs below

[global]
logfile = /media/hdd/log
logduplicatelines = 1
fallbacktimeout = 650
clientmaxidle = 30
nice = -5
maxlogsize = 1000
preferlocalcards = 1
#dropdups = 1
#lb_mode = 10
cachedelay = 120
bindwait = 120
resolvedelay = 30

[cache]
wait_time = 100

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = xxxxx
nodeid = D6091454102513B0
version = 2.1.3
reshare = 1
stealth = 1

[reader]
label = s*yuk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 500
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

[account]
user = linuxsat
pwd = support
caid = 0963
au = s*yuk
group = 1
cccreshare = 1

**anniman** · Jan 1st 2014

I don't use cccam to serve its all oscam. I do use an N line in my box to get emms hence the port

**thatfellow** · Jan 2nd 2014

Enable & configure cwcycle_check_enable in [cache] settings & test
Also your wait time seems far too low, try 200ms

[cache]
wait_time = 350,0100:500,1702:1500,090F:900,0963:200:200,09CD:260,09C4:75:75,098C:150,18:800,0B:1000,0D:1000,0500:600
cwcycle_check_enable = 1
cwcycle_check_caid = 0963,09CD,09C4,096C,098E,09AC,0961,090D,093B,0931,0926,0919,0907,09C7,09B6,09C1
cwcycle_maxlist = 4000
cwcycle_keeptime = 20
cwcycle_sensitive = 0

**anniman** · Jan 2nd 2014

Mega thanks thatfellow

its better not getting the glitching as much but still get the 1ms thing like this

76C010A8 c ***** (0963&000000/FFFF/0F21/67:CF3E5E9470713587B2B16E616A3B3654): cache1 (1 ms) by ***uk - Disney Junior HD UK (cwc LEARN)

with the learn at the end. I've been on the streamboard but its a bit difficult to learn about cachedelay in german and the translations not exact.
do I still need it in the global settings. I had previously been using it in the obsolete cache settings that why it didn't work probably

**thatfellow** · Jan 2nd 2014

Quote

its better not getting the glitching as much

This is not a perfect solution but it will mean less bad ecm's from cache

Quote

76C010A8 c ***** (0963&000000/FFFF/0F21/67:CF3E5E9470713587B2B16E616A3B3654): cache1 (1 ms) by ***uk - Disney Junior HD UK (cwc LEARN)

cache1 1ms is normal, just means that you got that particular ecm from cards and it was in cache1 for instant hit for second, third.. requests..

Remove whats in RED and test again

[cache]
wait_time = 350,0100:500,1702:1500,090F:900,0963:200:200,09CD: 260,09C4:75:75,098C:150,18:800,0B:1000,0D:1000,050 0:600
cwcycle_check_enable = 1
cwcycle_check_caid = 0963,09CD,09C4,096C,098E,09AC,0961,090D,093B,0931, 0926,0919,0907,09C7,09B6,09C1
cwcycle_maxlist = 4000
cwcycle_keeptime = 20
cwcycle_sensitive = 0

Quote

I had previously been using it in the obsolete cache settings that why it didn't work probably

Yep, a lot of the cache settings have been revamped and need reconfiguring

philthy · Jan 3rd 2015

Found this thread at the top of google. I'd had the exact same problem.
I put the settings suggested into oscam.conf, and so far it seems ok?
One thing, my ecm times have jumped from circa 90mS to over 300mS. This doesn't appear to be a problem though?

Edit to add:
Not over 300mS, it's exactly 200mS slower than normal. Not understanding exactly how this cache works, I'm presuming it is an injected delay to do the cwc cycle check?

- - - Updated - - -

Still happening?

- - - Updated - - -

It's better, but still glitching?

ykotko · Feb 15th 2016

Any fix yet?

**jim1985** · Feb 15th 2016

Wow, talk about an old thread revival.

I'm pretty certain when I had this problem a long time ago, I found adding this to the oscam.conf file sorted the problem:

Code

[cache]
delay                         = 5

ykotko · Feb 15th 2016

Lol. Sorry pal needed same info
Where did you put that mate in oscam config? On its own or with the above

ykotko · Feb 18th 2016

That didnt work for me. Anymore input guys?

SWEagle · Sep 5th 2016

Yeah, same thing happening to me.

This started when I moved in to a better server with a very low ping. I'm guessing that sly uk doesn't like low pings.

I think you should try to set ir up to:

[cache]
delay = 38

It help me a bit. I'm even considering to higher. Just testing...

**anniman** · Oct 14th 2016

no that is for one specific caid and has nothing to do with the problem

oscam glitching from cache

OSCam Support Forum

Participate now!

Share

Tags