Hi everyone
Hopefully some kind person can help this newbie, here’s my current situation I have a VU+ solo2 box with a 1m motorized dish and have been using an old image of Black hole (1.7 or 1.9 I think). I finally decided to update the image that I was using. So I’ve downloaded version 2.0.7 and unzipped it and installed it on my box, however I can’t figure out how to enter the correct settings for my set up, Tuner A was set up for my motorized dish (USAL?) and Tuner B was set up for Astra 28.2E for my old dish. I have tried to update the image 2 or 3 times the image is updated with no problems but I am struggling with dish config part of the set-up
Here's what I've done so far
Installed the image and then got a network connection and IP address when I get the prompt to config tuner A I select simple - positioned and then enter Longitude & Latitude details press ok and then set-up tuner 2 to single satellite 28.2° east and then press OK again.
I then finish the set-up and then load a channel list and try a free to air channel from different satellites but don't get any picture or sound when I select any of the fta channels. I get the image showing that the dish is being re-positioned but no picture or sound?
I did read on another forum as part of the set-up that you need to so I did this on the original install
"Press Menu
Select Setup Press OK
Select service searching Press OK
Select Positioner Setup Press OK
Select goto 0 Press RED Button
Dish should now goto 1w." I did this when I tried to update the image the first time and as far as I know the dish goes to 1W, I tried to update the image originally so I'm not sure if this has caused a problem or not? is it possible that the settings that I am entering aren't re-positioning the dish as it doesn't seem to move?
if anyone can offer any help, advise or point me in the right direction I would be very grateful. If you need me to post any screen-shots or any other information let me know. If I have posted this is the wrong place please feel free to move it to the correct one and accept my apologies
Many thanks paul_genesis
:59: